|
|
Administrative building
Zajícová, Dagmar ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is the elaboration of project documentation for the construction of administrative building in Brno. The main entrance to the building is oriented to the south-east. The building is L-shaped and it is designed as a two-storey, partly with a cellar. The perimeter bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm and the internal bearing masonry of thickness 250 mm. After that the basement masonry is made of concrete blocks thickness 300 mm cast in concrete. Internal non-bearing masonry made of ceramic blocks thickness 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.
|
|
|
Municipal office
Stejskal, Vojtěch ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This project designs a new administrative building, which will serve as a municipal office in Postřelmov. The building structure is made as a masonry construction with ceiling construction of prestressed panels Spiroll. The building has two floors and partial basement coverage as well. The building is covered with a flat roof. The building is provided with two sheltered parking lots.
|
|
|
Accommodation
Grbálová, Lucia ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the master’s thesis is elaboration of the complete project design documentation of accommodation. The object is designed as a double-star boarding house with stables and a caretaker's flat. It is situated in the village Pružina-Chmelisko, on recreation grounds. The object of the boarding house is divided into three above-ground floors and one underground floor. The roof structure is designed as a gable roof. The stables are single-storey buildings with partially used attic above the caretaker’s flat. The roof structure is gabbled. The carrier system of the boarding house consists of clay blocks and a monolithic, reinforced concrete floor slab. The stables’ carrier system is designed as a wooden joist floor, ceramic fittings are slated for filling. Within specialization is the solution of fire safety assessment of both buildings, thermal technical assessment, assessment of acoustics and lighting of the boarding house.
|
|
|
Center of leisure activities
Kaňovský, Michal ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This diploma thesis presents a project documentation for construction of a center of leisure activities. It's construction site located on the outskirts of town Třebíč, "Na Kopcích" street. The building is composed from the two visual and three service parts which are connected to each other. On the left side in first floor there is a bowling with services and the second floor will serve for sport activities of jumping, spinning or relax massages. On the right side of building will be usable for education or for leisure activities. The building is designed as a two floors with partial basement. The construction system is formed by longitudinal wall system with precast hollow core slab or reinforced concrete slab. The structure is based on strip foundations with walls of permanent formwork. External wall is based on clay brick of therm type. The staircase is designed as prefabricated element or cast-in-place reinforced concrete. The roof is constructed as warm flat green roof with expanded polystyrene with screed to fall.
|
|
|
Facilities of football club
Stuchlík, Jan ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Topic of diploma thesis is new building of football club facility in Šternberk. This thesis should fully cover all the requirements for documentation for building construction. Object is designed as a three storey building, basement included. Just half of the basement is actually in contact with the soil. There is also tribune designed from prefabricated elements connected to the building as a part of the project. The whole building is designed as a masonry building from Porotherm system with external wall from thermo insulation blocks, monolithic ceilings and the flat roof. The basement floor is design for thy gym and facilities connected to that such as dressing rooms, showers, toilets, sauna, jacuzzi and massages. You can find reception, buffet with the toilets and the dressing rooms for home team, away team and referees on the first floor. The second floor is divided to two parts. One as apartment and the second as administrative part for the club management.
|
|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Sports and relaxation comlpex
Kainar, Martin ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
In this thesis is elaborated a complex documentation for a new sports and relaxation complex. Project accentuates on dispositional and architectural design with emphasis on technical solution. Valuation of static, antinoise protection, energy saving and safety of construction using is part of the project. Heft of the thesis is designed by AutoCAD software application.
|
|
|
Accommodation
Maryšková, Eva ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The aim of my thesis is to design new Guest house in Čeladná. First part is focused on building design and construction. Second part is focused on heating, ventilation and air conditioning (HVAC) design and renewable energy sources. Third part is focused on detailed solution of noise and vibration from the environment around building. Guest house is three – storey building but there is one more underground storey for technical facilities. Ground floor contains staff facilities, restaurant, entrance hall with stairs and office. On the second floor we can find four guest rooms with terrace and corridor. On the third floor we can find three guest rooms. Heating in the building is secured by gas condensing boilers. Ventilation is provided by two air condition units. Each guest room has radiators and cooling distribution units and ventilation. Cooling is secured by one cooling unit on the green roof. On the gable roof we can find 75 photovoltaic panels. Third part is focused on detailed solution of noise, vibration from the environment around building and spatial acoustics of guest room. The thesis is carried out in AutoCAD, Sketch up, Lumion and DEKSOFT software. All structures comply with the valid standards and regulation.
|
|
|
Retirement home
Stejskalová, Markéta ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This work aims to develop projekt documentation for building construction. The projekt addresses the new construkction of a pension for seniors. Pension is located in the city of Kutná Hora in the Central Region. The object is designed for 34 people throughout the year. Pension has one underground and free above ground floors. The shape of the object is unspecified at several height levels. It is a reversed L-shaped with mid-point projections. Pension is bricked from ceramic blocks. The roof is a combination of a sliding flat roof and a console roof. The building is situated in a place of flat terrain.
|
|
|
Accommodation facility
Šindlář, Josef ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this master thesis is a project for the construction of accommodation facility with a basement. The building is located in Ostrava close to the historical centre of the city. The building is a 4starcategory accommodation facility and will serve as temporary accommodation. There will be a restaurant and a gym designed for hotel guests only. The accommodation capacity is 68 guests. A car park for hotel visitors is situated close to the hotel. It is a brick structure made of sand-lime blocks,monolithic ceilings and a first underground floor. The building is insulated with ETICS system. Paste-like plaster and brick tapes were used for facade construction. The roof is made up of one roof surface and the foundation will be realized on the foundation strips. The building is situated on flat terrain. The project was developed in ArchiCad21, AutoCad 2016 and SketchUp.
|
guest ::
