National Repository of Grey Literature 67 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Design of heating system of office building
Klečka, Jaroslav ; Topič, Jan (referee) ; Horká, Lucie (advisor)
The bachelor's thesis deals with the design and solution of the heating system in the Administrative Building in Brno. The work will be divided into three parts. The first part is theoretical, namely by comparing hydrogen fuel and natural gas. The second part will include the calculation and design part, in this part the work deals with the design of boiler room components, calculation of heat losses, etc. The third part means the design documentation of the construction, which will be processed at the level of the DPS (documentation of the execution of the construction).
Heating of flat house
Slíva, Lukáš ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém and water heating for apartment house in township Jablůnka. In the theoretical part, I deal with the types of heating systems and radiators. In the computational part, I have designed the heat source, hot water heater, and the entire heating system. The conclusion of the thesis is a project, that contains a technical report and drawing documentation including attachments.
Heating of an apartment building
Vojtovič, Daniel ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The bachelor thesis solves the design of heating of an apartmant building at cadastreal area Markvartovice. The building has three floors, no basement and it‘s covered by gable roofs. Two air-water heat pumps are designed as a heat source, all in SPLIT variant. Hot water preparation is designed as preferred. Bacherol thesis is divided into 3 parts – theorical, calculation and project. The theoretical part is about heat pumps. The calculation part is about design of the building heating and hot water preparation. The building is heated by a system of radiators. The building ventilation is natural. Heat sources are located on the first floor in the technical room and externals sources are located right in front of the aparmant building directed to area of technical services located next to neighboring plot. The project part contains project documentation and a technical report.
Heating of flat house
Piętoňová, Sára ; Horká, Lucie (referee) ; Topič, Jan (advisor)
The aim of the bachelor thesis is the design of heating and hot water heating for an apartment building in Brno. The theoretical part of this thesis analyzes the principle of condensation and its effectiveness with regard to the conditions during which condensation takes place. It also deals with gas condensing boilers and their operation and efficiency in various connection methods. In this regard, it also solves different connections for hot water preparation and compares individual methods with each other. The conclusion of the theoretical part focuses on flue gas extraction and its effectiveness with regard to operation in the heating season and beyond. The calculation part documents the design and calculation of heat losses of the specified object. Subsequently, design of heating elements and assessment of individual devices and fittings that are part of the heating and hot water preparation system. The project part contains the graphic solution of the project, i.e. project documentation for the level of project implementation documentation. In the last part of the work there is also a technical report complete project documentation together with attachments.
Large-area heating/cooling systems
Čechlovská, Michaela ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with heating and cooling of an administrative building with a cafe. The thesis is divided into three parts – theoretical, practical and experimental.The theoretical part deals with large-scale heating and cooling systems. Ceiling heating and cooling systems are described with their advantages and disadvantages. Another topic which is described are the types of hydraulic connection of the system. The practical part is devoted to the actual design of the heating and cooling of an administrative building with a cafe. This part deals with two options of the proposal. In both of these variants, an air/water heat pump is designed as a source of heat and cold. As a first option, heating and cooling are designed using ceiling active plasterboard panels and radiators. In the second variant, a system with heating elements is designed for heating and fancoil under-ceiling units are designed for cooling.The experimental part deals with measurements, which are focused on a ceiling panel used for heating and cooling. The measurement deals with determining the properties of a single ceiling panel. The role of this measurement was to determine the pressure losses at different flow rates, peak performance and efficiency of this ceiling panel.
Large-area heating and cooling systems
Kohlová, Vendula ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The aim of the diploma thesis is to design heating and cooling in the office building and the showroom. The theoretical part deals with large-scale heating and cooling systems. The types of these systems and their advantages and disadvantages are described here. The practical part is devoted to the design of heating and cooling in the assigned office building and the showroom. In this part, two variants of the design are considered. The first variant considers the use of a heat pump as a source of heat and cold. In the second variant of the solution, a gas condensing boiler is used as a heat source and a chiller as a cold source. The experimental part deals with measuring the properties of one ceiling panel. The main task was to determine the cooling capacity of the ceiling panel.
Heating of flat house
Segeďa, Petr ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
In my bachelor's thesis, I deal with the heating of an apartment building in Jablunka. It is a newly built apartment building with 4 floors. The aim of the bachelor thesis is to design heating and hot water for this building. In the theoretical part, I deal with the materials used for heating system pipes in heating and fittings that are used for heating. The calculation part deals with the design of the heat source, heating system, hot water heater, and radiators. The last, project part, contains a technical report and drawing documentation at the level of the implementation project.
Heating of flat house
Burýšková, Jana ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém for apartment house in Brno. The heating system is two-pipe closed with forced circulation. Areas of the heating surfaces are panel radiators and tubular. The heat source for the solved object are two gas condensing boilers in the technical room. Mixed hot water heating will be solved in an indirect heating heater. In the theoretical part the thesis deals with the types of heating systems and radiators.
Heating of elementary school
Holiš, Martin ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The goal of this thesis is to design a heating system for a building of an elementary school in Polešovice. The thesis is divided into three parts. The first, theoretical, part discusses heat pumps with the main focus on gas absorption heat pumps. The se-cond part addresses the design of the school heating as well as the design of an ecological heat source. The part consisting calculations introduces the calculation of heat losses, the optimal choice of temperature gradient, the design of heating surfaces, the design of heat sources including the design of the bivalent source, the way of hot water preparation, dimensioning, the security equipment and other calculations. The last part deals with the drawing documentation, the technical report and also some economical questions such as return on investment based on measured efficiency of the heat source.
Heating of Residential Building
Plšek, Michal ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The bachelor thesis deals with the design of heating and hot water heating in a new row house. The apartment building consists of four floors and a basement. The building is brick with a flat roof and is insulated. The bachelor thesis is divided into three parts. The first part focuses on solving the theoretical topic of heat distribution and measurement of heat in apartment buildings. The second calculation part solves the design of the heating system together with the design of hot water. The heating system is designed as a two-pipe hot-water system with two condensing boilers as the main heat source. The last project part contains the technical report and the corresponding drawing documentation.

National Repository of Grey Literature : 67 records found   1 - 10nextend  jump to record:
See also: similar author names
1 Topič, Jakub
Interested in being notified about new results for this query?
Subscribe to the RSS feed.