|
|
Wood-splitting machine
Svoboda, Vít ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The objectives of the bachelor’s thesis is to make a short research about the cutting machines in general, compare the design, individual drives and the parameters of these machines. The next part is the emphasis on the actual construction of the machine, which is another goal of the work. At first, the frame is designed, then the hydraulic circuit of machine is designed by calculating and the last part deals with control and supporting calculations splitter component elements. The basic drawings of selected components of the splitting machine are parts of the work.
|
|
|
Monitoring of the earth-fill dam of the Karolinka waterworks
Svoboda, Vojtěch ; Novotná, Jitka (referee) ; Pařílková, Jana (advisor)
The bachelor‘s thesis is focused on selected parameters monitoring of the earth dam of hydraulic structure Karolinka. The first outflow areas on the Karolinka dam air face were already observed and the seepages were measured after the first filling. As a result, in addition to standard monitoring, monitoring of the dam by electrical impedance spectrometry was started in 2011. During the reconstruction of the dam in 2013 was realized the construction of the sealing wall for minimalized of seepages. The selected data were compared before and after reconstruction of the hydraulic structure Karolinka. The bachelor‘s thesis was realized within the sustainability of the international project E!7614 of EUREKA program.
|
|
|
Investigation of intercalation of alkaline metals in electrochromic devices
Kortyš, Petr ; Špičák, Petr (referee) ; Svoboda, Vít (advisor)
This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.
|
|
|
Study of Electrochemical Insertion Cations to the Oxides of Transitive Metals
Svoboda, Vít ; Kadlec, Jaromír (referee) ; Trnková, Libuše (referee) ; Kazelle, Jiří (advisor)
Electrochromic devices are based on the intercalation processes to the active layer mostly WO3. The optical properties of active layer are changed by intercalation ions from the electrolyte. For that purpose are used Li ions. The mass of thin layer can be observed by the QCM method. This method is based on the changes of the resonance frequency of a quartz crystal resonator. The investigated substance is deposited on the surface of the resonator. Various metals (Pt, Au, Ag) and their compounds should be plated on the resonator. Most frequently, the resonators for the frequency 5,0 MHz are used. This frequency change is used for the detection of chemical changes of the electrode surface and is very sensitive.
|
|
|
Oscilloscope module with wireless data transmission
Kočík, Karol ; Svoboda, Vít (referee) ; Havlíková, Marie (advisor)
The aim of the thesis is the design and realization of the oscilloscope module with wireless data transfer. One part of the thesis is a short overview of the different types of AD converters. The main part is focused on the hardware configuration that allows modification of the wireless module of the oscilloscope, and the possibility of using in the industrial zone. The design takes into account reducing of consumption and EMC compatibility.
|
|
|
Zinc based negative electrode for alkaline accumulators
Prchal, Jiří ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
The object of this project is research and preparation of the permanent zinc electrode in a strong alkaline surrounding for the usage in Ni-Zn accumulators. This system is characterized by a low overall ecological impact on environment, higher specific energy and higher electromotive force than nowadays commonly used systems (lead, nickel-cadmium). The goal of this project is to originate a new procedure, which will make possible to steady a zinc electrode. Every research faces a problem shaping changes of zinc electrode during cycling and related low cycle life. This work consists of the theoretical part, in which is explained a basic accumulators mechanism and practical part, in which is described performed research.
|
|
|
Temperature scanning with Web site presentation
Svoboda, Vít ; Vyoral, Josef (referee) ; Kacálek, Jan (advisor)
This master’s thesis solves design and realisation of device for temperature value scanning. First chapter introduces reader into basic principles of transmitting data over inetrnet. Next, the conception of whole designed system is described. Third chapter treats about suitable types of hardware to complete the system. Fourth and fifth chapter describes coherent vision of software realisation for values scanning and their storing into database. Last part attends to implement the dynamic web pages.
|
|
|
Study of fuel cells
Kamrla, David ; Svoboda, Vít (referee) ; Novák, Vítězslav (advisor)
This bachelor thesis offers a look into the issues of hydrogen fuel cells and is focused on low-temperature alkaline fuel cells (AFC). The primary aim is creation of the manufacturing process of the AFC electrodes, followed by the verification of these procedures by using them in experimental measurement. Further on, another possible options of the usage of various catalyzers and processes of AFC electrodes are presented. These options are evaluated and compared by experimental use of various pairs cathode – anode, with measured characteristics of the make-shift fuel cell being the outcome.
|
|
|
Investigation of mass changes by piezoelectric resonator
Kužílek, Jakub ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
An operation deals with a concept of the new cell for measuring weight changes with high precision through the use of quartz crystal micro-scales called QCM. The new cell is destined for crystal resonators which diameter is 14mm. The resonators are produced in the Czech Republic. A price is the greatest advantage of crystal resonators in comparison with original crystals. The next positive is higher mechanical tolerance which is outgoing of a guest-size. The cell designed by this way is tested in electrochemical system where a deposition of metallic copper in crystal is happening. A homologation of accuracy is judged by Faraday’s law and using Sauerbrey equation for quartz crystal microbalance in cyclic voltammetry measurement method.
|
|
|
Information security as one of the performance indicators in energy company
Kubík, Lukáš ; Svoboda, Vlastimil (referee) ; Sodomka, Petr (advisor)
Master thesis is concerned with assessing the state of information security and its use as an indicator of corporate performance in energy company. Chapter analysis of the problem and current situation presents findings on the state of information security and implementation stage of ISMS. The practical part is focused on risk analysis and assessment the maturity level of processes, which are submitted as the basis for the proposed security measures and recommendations. There are also designed metrics to measure level of information security.
|
guest ::
RSS feed.