|
|
Multifunctional building
Rydlo, Jan ; Spáčilová, Jitka (referee) ; Sukopová, Dáša (advisor)
This diploma thesis solves the project of polyfunctional apartment building in Habrovany village in the scope of the documentation for the realization of the building. The building is designed in accordance with the custom of building the region with the greatest possible elegance and modern design. The project includes two classic flats 3+kk and 5+1 and is one above-standard attic apartment 5+1 with a large roof terrace. The house belongs to two premises in the 1. floor and two office units in the 2. floor. The solution of parking on the land for residents and shop visitors and a smaller grassy park behind the house.
|
|
|
Family house in Vsetin
Londa, Libor ; Ing.Ján Veselovský (referee) ; Sukopová, Dáša (advisor)
The thesis is focused on preparation of project documentation of a detached house with an establishment. The building is designed to parcel No 1126 Vsetin. This is a two-storey house of brick ceramic blocks POROTHERM. The house is roofed gabled roof. Drawing part was processed in a computer program AutoCAD.
|
|
|
Residential Building
Vlachynský, Antonín ; Stodůlka, Jindřich (referee) ; Sukopová, Dáša (advisor)
This bachelor`s thesis deals with the drafting of project documentation of apartment building. Residential house is situated on flat land in the cadastral territory of Veselí nad Moravou Předměstí on plot number 4651/23. The building has three floors. There is a total of 5 residential units. Total capacity is 15 people. The support system is designed from the system Heluz. Roofing by flat roof. The building has a usable area of 593,7 square meters.
|
|
|
Detached house with business premises
Češka, Ondřej ; Průša, David (referee) ; Sukopová, Dáša (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for building of a family house with a design office. The building of the family house is located in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which corresponds to the conditions of operation of the building. The family house is designed for a family of four. On the 1st floor there is a WC + bathroom with a technical room and a gym. On the 1st floor there is a design office, which is intended for the homeowner, then a kitchen, a living room, a guest room with its own dressing room, a workshop connected with the garage. On the 2nd floor there is a living area consisting of three rooms and a studio. The structural system of the building is designed from the POROTHERM system with an external contact insulation system ISOVER GREYWALL with a thickness of 120 mm. Vertical load-bearing peripheral structures of 1st floor, 1st floor and 2nd floor will be made of POROTHERM 30 P + D. The inner bearing walls are made of POROTHERM 30 P + D and POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-bearing masonry. The exterior plaster is a CEMIX FLEXI thin-film, water-repellent, fluted with 2 mm grain in light gray. The staircase is designed with reinforced concrete monolithic. The horizontal load-bearing structures consist of the ceramic-concrete system POROTHERM (beams Pot and inserts Miako) th. 250 mm. The roof is gabled with TONDACH Hranice 11 roofing in black. Doors and windows are designed in gray and white, garage doors are designed in gray. Floor coverings are designed taking into account the use of individual rooms, namely ceramic tiles and laminate flooring. The main goal of my work was to solve the disposition for the given purpose, ie to design a suitable construction system and to draw up the drawing documentation including the text part. The bachelor thesis is processed in the form of project documentation for construction.
|
|
|
Apartment building on Ořechovka
Holomčíková, Hana ; Osička, Jan (referee) ; Sukopová, Dáša (advisor)
The main goal of this bachelor’s thesis is to design apartment house and create its blueprints. Object is located in Southern Moravian region in south-eastern outskirt of town Strážnice on allotment n. 2012/112. Purpose of using this designed apartment house is building for living consisting of seven apartment units. Every apartment unit has its own CELLAR, one outer parkland and one garage parkland. Apartment house is designed as building with basement, three above-ground floor and flat roof. On the property allotment are designed row garages with shed roof made of truss. Apartment house is designed as wall system construction. Foundations are made of strips, ceilings are designed as composed of reinforced concrete. Supporting perimeter masonry of basement is made of formwork, supporting perimeter masonry and all inner walls of overground floors are made of ceramic bloks. Staircase is designed as reinforced concrete. Thermal insulation above level of basement is composed of basalt wool. Under terrain level and in area of plinth is used Extruded polystyrene XPS as material for thermal insulation.
|
|
|
Multifunctional building
Vecheta, Jan ; Spáčil, Miroslav (referee) ; Sukopová, Dáša (advisor)
The assignment of the diploma thesis is the elaboration of project documentation for the construction. It is a detached multifunctional house, which is located on a slightly sloping terrain. The building consists of four floors and is partially basement. In the basement of the building there are mainly storage spaces, which are designed for housing units located on the highest floors. The space of the first two floors consists mainly of commerce and there is a sports shop, massage equipment, hairdresser and office space. The building is based on simple concrete foundation strips. The perimeter masonry of the basement is made up of concrete blocks, which create lost formwork for concrete filling. The load-bearing masonry of the building consists mainly of ceramic blocks. The ceiling structures are made of Spiroll panels, which are complemented by reinforced concrete monolithic slabs. The building is insulated with the Etics contact insulation system. The roof is designed as a single-skin vegetation roof.
|
|
|
Family house in Zruč nad Sázavou
Dvořák, Jiří ; Soudek, Pavel (referee) ; Sukopová, Dáša (advisor)
This thesis deals with a new family house in Zruc nad Sazavou. The family house is designed for owners of the design office building with parking. Height position of the house is adapted to vertical alignment of the ground, the object is in slope. It is a two-story, single-family house for 4-5 persons with garage for two cars. Plan shape is a polygon. The structural system of brick Porotherm bricks, ceiling structures of the panels Spiroll. Foundation strips are made from plain concrete. Flat roof single casing. The property is connected to the construction of winter garden. The project was processed by a computer program ArchiCAD.
|
|
|
Apartment house,Rychnov nad Kněžnou
Kubalíková, Veronika ; Zima, Radek (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor theses is the design of a multi-storey apartment building with underground garage in Rychnov nad Kneznou. The apartment building is designed for family housing and consists of nine dwelling units. The main entrance of the building is oriented to the north. The apartment building has an rectangle floor plan and is covered by a flat roof. The occupiable rooms are oriented to the south. The above-ground floor is made of clay blocks and the basement is made of concrete blocks. The horizontal structure consists of cast-in-place reinforced concrete floor. The project was designed in the educational version of software AutoCAD. This work emphasizes layout design, architectural design, static requirements and structural safety requirements.
|
|
|
Family house with a bicycle shop
Beránek, Tomáš ; Stodůlka, Jindřich (referee) ; Sukopová, Dáša (advisor)
The thesis is focused on preparation of project documentation of a detached family house with a bicycle shop. The shop is situated in ground floor and house has also atic and basement with garage for two cars. House is completely designed in Velox system. Thanks to the system it is energy-saving building. Drawing part was processed in a computer program AutoCAD.
|
|
|
Multifunctional Building
Šimánková, Markéta ; Kerbr, František (referee) ; Sukopová, Dáša (advisor)
The topic of the master's thesis is the design new multi-functional building. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. The building is located in undeveloped land in sloping terrain. It is detached building with four floor above the ground and one underground floor. The building has commercial premises and eleven flats, one of which is accessible flat. There are also seven separate garages on the underground floor. The basisc are made from contrete strips. The house is made by a brick technology of a ceramic blocks. The external walls are insulated with certified contact thermal insulation system. The building is roofed with warm flat roof.
|
guest ::
RSS feed.