|
|
Emergency Button for Seniors
Verbík, Josef ; Chmelař, Milan (referee) ; Strašil, Ivo (advisor)
This Thesis „Emergency Button for Seniors“ is about suggestion of realization of system emergency signalization. The System consists of programmable digital watch with wireless interface and PC with software processing signals. Status signalization is created by phone message and figuration of dialog on monitor. There is used free software for realization. Operation system on PC is Linux (distribution Ubontu 11.04). For graphic transitional plane PC application is used cross-platform framework QT. For watch firmware is used C compiler MSP430-GCC, MSP debug v0,15 and firmware OpenChronos.
|
|
|
Audio Saving Module
Strašil, Ivo ; Kouřil, Jiří (referee) ; Říha, Kamil (advisor)
The aim of this thesis was to design and construct an autonomous, hardware voice recorder/player module. The device is made as a compact, built-in component for a motherboard of a target appliance. During recording, the incoming analog voice signal is converted to a digital stream by an ADC with 16 bits resolution and 24 kHz sample rate. Microcontroller LPC2103 (ARM7TDMI core) processes data, recalculates resolution and sample rate, encodes and converts to WAV format and save into a FAT/FAT32 filesystem on a Secure Digital memory card. At playback, the process is opposite: the microcontroller reads file from the memory card, decodes the stream and sends it to a DAC and then to a reconstruction filter. So there is an analog voice signal at the output again. The firmware allows control by logic inputs or by a serial bus, processing of uncompressed WAV files or WAV files with A-law or IMA ADPCM compression, continual recording including automatic freeing of card space by deleting the oldest records and a usage of a voice emphasis filter or of a signal dynamic compression circuit.
|
|
|
Software-based Burglar Alarm Control Panel
Drzsík, Dávid ; Krajsa, Ondřej (referee) ; Strašil, Ivo (advisor)
This bachelor thesis is interested in integration of security systems into intelligent home networking. For showing the network’s functionality, a demonstration panel with Tecomat programmable logic controller is used. This thesis deals with usage of programmable logic controllers as central units for home security systems. Library with three function blocks for simplification of the module’s configuration, work with user passwords, mail sending and logging function is an output of this thesis. A virtual interface for simplifying the configuration of this security system is have also been created.
|
|
|
Payment system for Android operating system
Iľko, Pavol ; Strašil, Ivo (referee) ; Burda, Karel (advisor)
The introductory part of this thesis deals with the information (current payment systems, data security, computer attacks) that provide the theoretical framework needed for further practical task. Further on, the detail description of ACP protocol is offered. The work primarily focuses on the proposal of payment system based on ACP protocol. Lastly, some of the difficulties that occur when implementing such application are outlined.
|
|
|
Attendance System Terminal
Chmelař, Jakub ; Mráz, Ľubomír (referee) ; Strašil, Ivo (advisor)
This thesis deals with electronic attendance systems which are nowadays being widely used to record employee attendance. General problem of attendance tracking is introduced in first part of the thesis along with a conceptual solution of an attendance system terminal. Author then describes a circuitry and a PCB design of a baseboard for a Cubieboard2 minicomputer, a RFID reader and a touchscreen LCD display. After successful testing of said PCB, the terminal has been completed and it was possible to focus on a software solution. Latter part of the thesis is dedicated to a specifics of the Allwinner A20 platform and its support by a GNU/Linux operating system. In following chapter author describes use of a Buildroot software for creating a Linux based binary image for an aforementioned minicomputer. Since an operating system and a peripheral support were successfully tested author could focus on a design and implementation of an attendance software that is described in the final chapter.
|
|
|
Internet system for sending news by e-mail
Horák, Michael ; Strašil, Ivo (referee) ; Pavelka, Ondřej (advisor)
The thesis deals with project lay-out and realization of the internet system dedicated to sending newsletters via e-mail. It especially aims at working with contacts and putting them in groups, editation of pre-prepared texts and sending the e-mails themselves. In the theoretical part, there’s described main traits of PHP language. There’s also described methods of creating the web forms, handing over their inputs and processing of that data. Next, there’s closer look on the PHP functions, especially for text processing, programming structures and conditions. Other functions, that can be found in this thesis described, are meant for sending the e-mails, creating hashs and managing sessions. In practical part, the problems are described generally. In the next part of a practical realization, this methods are looked closer upon and described more thoroughly. Also there’s defined how does the scripts work and which functions are used to make it work.
|
|
|
Ambulatory ECG Holter Monitor
Majerík, Peter ; Strašil, Ivo (referee) ; Číž, Radim (advisor)
The thesis deals with design of the device for monitoring four signals from the probes for scanning ECG, PPG and heart pressure. The thesis is mainly focused on hardware design of the device and the most important part is the selection of the storage media to which will be the data recorded and the selection of the microprocessor which has to be able to meet the requirements of the device. For the data recording is used SD card and the ARM based MCU was selected from the AT91SAM7S series. This thesis also deals with the software design for MCU which is needed to launch the device and with design of PC applications used for setting the device and for downloading the measured data. At the end there are presented results of the constructed device.
|
|
|
The Design of a USB Device
Klír, Tomáš ; Strašil, Ivo (referee) ; Hudec, Antonín (advisor)
In theoretical part of this master thesis is analyzed USB 2.0 interface, including USB OTG. Mainly are described here properties which are good to know for USB device design. In brief is given here a structure of the FAT file system. Practical part contains design of OTG Device and it’s realization including implementation of libraries for communication via USB and for working with FAT file system.
|
|
|
Interface for diagnostic busbar (SMBus/12C) for accumulators
Pintér, Zoltán ; Strašil, Ivo (referee) ; Pavelka, Ondřej (advisor)
The first chapter of the master´s thesis deals with the analysis of problems indesigning of devices, which include individual steps of the designing of the device and the choice of the most suitable option. It deals with the analysis of the proposed assignment and requirements for this device, analysis of battery management chip that the device should be able to communicate with, analysis of the I2C/SMBus communication protocol which is used for communication between the device with the battery management chips and possibilities of communication of the device with computer. The second chapter deals with the communications via USB bus and the description of this communication. The next step is dedicated to the selection of a programmable microprocessor Atmel AT90USB1287, describes his pin configuration, the possibilities, describes the way of USB interface connection, the method of the I2C/SMBus interface connection and its protection. In the last part of the this chapter the thesis describes Atmel microcontroller programming, specifically describes how to program I2C/SMBus communication, USB communication and how to write a program to the microprocessor. The third chapter of the thesis deals with the design of a single device, and components like a scheme of the connection and the concept of functional realization of the communication with device. The fourth chapter deals with the development of the device itself. Describes the parts of final involvement and describes the parts of the final program for microprocessor, such as communication with SMBus device and communication through the USB bus. The fifth chapter is devoted to the development of communication applications in Java. This section describes the different elements of applications such as communication with USB devices, data storage and open for viewing. The last chapter presents the final device and the final communication application.
|
|
|
Keeloq System Experiments
Kočíř, Michal ; Hajný, Jan (referee) ; Strašil, Ivo (advisor)
The bachelor thesis deals with security issues in wireless control. On this basis the laboratory task for experiments with Keeloq system is designed. The concept of laboratory task is justified and supplemented by processed documentation. In the first part of this thesis the principles of security and transfer of information for wireless technology are described. In the second part KeeLoq system is analysed. There are the principles of encoding and decoding of transmission of KeeLoq system telegrams described. KeeLoq 3 Development Kit of Microchip company is used for description of encoding and decoding. The next section deals with an attack on KeeLoq system by "brutal force", which is also demonstrated by generated code in programming language C. The third part provides the concept of laboratory tasks that includes introductory meditation, discussion on assigned elements, content and structure of laboratory task. Finally, the fourth part contains the documentation of lab experiments with KeeLoq system, whereby students work out laboratory task.
|
guest ::
