|
|
Family house with an establishment
Kaman, Tomáš ; Janda, Lukáš (referee) ; Sobotka, Jindřich (advisor)
The subject of this bachelor thesis is the design and construction of project documentation for a family house with an establishment, which is situated in the village Lesonice near Moravský Krumlov. The building is designed as a detached three-storey building, which has one underground, one overground and residential attic. The family house is designed for a four-member family. A part of the building is designed - a massage room. Access to the house and the establishment is designed from the northeast side. The living area is mostly oriented to the south and west. The establishment is located southeast of the residential area and has 2 parking spaces for customers. The building construction system is designed from the Porotherm system. The vertical masonry is made of ceramic blocks Porotherm 50 T Profi. The horizontal structures are made of reinforced concrete. The roof above the shop is designed as a flat single-walled non-walking roof and the roof above the living area is saddle.
|
|
|
Family house with an establishment
Formánek, Petr ; Janda, Lukáš (referee) ; Sobotka, Jindřich (advisor)
The aim of this bachelor’s thesis is to deal with a proposal of family house with a moto-service establishment. The project is located on the land in the village Radslavice near the city Vyskov. It is two-storey partly basement house, which is connected with the motor-service establishment on the north side. Both objects form one building unit. Detached house is designed for permanent living of 4-5 family members, where the first floor is designed as a communicative zone and the second floor as a resting zone. There are a technical room and a garage on the underground floor. Peripheral walls are planned to be made from burnt bricks for accurate brickwork Porotherm of 500 mm thickness with a laine mineral isolation. The ceiling construction is from semi-mounted constructions Porotherm or monolithic reinforced concrete constructions. The project documentation is done according to the Decree number 499/2006, as an implementing documentation including fire safety solution, thermal technical assessment and building physics.
|
|
|
Kindergarten
Krištofiaková, Nikola ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The matter of the bachelor´s thesis is the new building of single-storey kindergarden in the city of Litovel. The object is formed by lenghtwise brick supporting systém. Ceiling structure ,which is supporting structure of flat roof as well, is formed by prestressed ceiling panels Spiroll. The roof is flat, green. The object contains one department of the kindergarten for 24 children maximum. The main living room for children is oriented to the southern side.
|
|
|
Modernisation of agricultural building
Seifert, Jan ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The project deals with the modernization of the agricultural building which leads to a change of the using building. In an effort was to make use of the building which goes to into ruin and to create jobs in this location. The building is located on the plot no. 212 on the north of outskirts of Opatovice I.. In the area there is a cowshed and a silage trough. The former cowshed will be rebuilt into a woodworking facility constituted by manufacturing and administrative part. The silage trough will be used as a waste stock. A new outdoor wood store will be built in the northwest part of the plot. The administrative building will be added to the main building with a basement made from permanent formwork. The ground floor and the first floor are made of clay bricks and reinforced concrete cross-reinforced slab 150 mm thick. The internal partitions in the 1st floor are made of clay block prartitions 115 mm thick. The internal partitions in the 2nd floor are plasterboard 100 mm thick. Rebuilding involves a large number of demolition work for example new openings in existing walls. The whole woodworking facility will be insulated by a certified thermal insulation system 100 mm thick on the production part and 180 mm thick on the administrative part. The object is covered with saddle roof shaped letter "T" with a sheet metal cover. The original hard landscaping will be replaced by an asphalt road.
|
|
|
Multifunctional Building Brno
Kotoulková, Leona ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Sobotka, Jindřich (advisor)
This work contains technical drawings, architectural design and architectural detail of the Multifunctional house in Brno, Líšeň district. Basis for this design was taken from my student work of 6. semester. The design is mainly inspired by construction system - module frame container system by Intecom company. The intent is to make the best use of the profile of the terrain, which descends steeply. The building also responds to surrounding prefab developement and to the Novolíšeňská road, which stands for one of the busiest in Brno. The acces to the plot is situated on the opposite side from the road. This driveway is separated from the ascending main road by the supporting wall. A few parking places are situated there. There is also a bus stop in near vicinity, thanks to which is possible to reduce automobile transportation. The building is divided into three blocks. Main two with flats and third, ground-floor, between them serves as a pastry shop. These two main blocks are identical and each of them is axially symmetrical. Each block has four floors, three above and one under ground. A block contains four maisonette flats, four garages, two offices of individual use and shared middle connecting part. The middle connecting part is inspired by a greenhouse. The pavement here is reduced and mostly replaced by grassed floor, which can be used for growing plants. This whole part is sheltered by semipermeable fiberglass. The front-side of the building is covered by light facade Polycon, which also covers the whole front slanted part of the roof. The rest of the building is covered by galvanized trapezoid sheet of tin.
|
|
|
Detached house in Vracov
Böhmová, Sabina ; Sobotka, Jindřich (referee) ; Kolář, Radim (advisor)
The subject of my bachelor thesis is the process of structurally-technical part of the project documentation of a newly built family house in Vracov. Resolving building is located in the western part of the city Vracov in gently sloping terrain on the east side. The plan of the house has the shape of two adjacent rectangles and is a partially with cellars. Roofing of the main living part of this house consists of a hip roof with a slope of 30 °. The garage belonging to the house is covered by a flat green roof. We can generally say that we used mostly conventional building materials on this family house, apart from circumferential constructions. Those are heat-insulating ceramic fittings Heluz Family 2v1 with polystyrene foam inside the cavities. The main materials used for building the house include brick shaped Heluz. My bachelor thesis has also additional essey. Its topic is Flat Roofs - Green Roofs.
|
|
|
Alzheimer's Center
Zikmunda, Václav ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis solves the new building of the medical facility. The building will serve as a home for people with Alzheimer's disease and other types of dementia. The facility will be equipped and equipped to provide modern nursing care that focuses on Alzheimer's clients in all stages of the disease and other types of dementia. If necessary, a nursing doctor with a nurse will be present in the facility. The nursing doctor has a separate medical office in 1st floor. In addition, a phototherapeutic beach in the 1st floor, which has a favorable influence on human psyche and helps in the treatment of Alzheimer's disease, will also serve to the clients. Furthermore, it will be possible for the clients of this facility to use the accompanying services of commuter hairdressers and pedicurists / manicurists who will use the multipurpose room (canteen) in their 2nd floor for their work. The kitchen has been designed to prepare and dispatch imported food.
|
|
|
Detached house with two flats in Otradov
Myška, Jan ; Sobotka, Jindřich (referee) ; Kolář, Radim (advisor)
The subject of this bachelor´s thesis is the process of building the technical part of the project documentation for the realization of a detached house with two apartments in the village Otradov. The building is architecturally designed so that projects from the rural architecture. The house has a floor with attic and partial basement. Roofing is using two different height shelves. The building is designed structural system Naturblock. This bachelor´s thesis is on theme layers of roof sloping roofs.
|
|
| |
|
|
Family house
Šefl, Jan ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
Topic of the thesis was to make architectural drawings of two floor building in Zlín, which is placed on planar terrain. Object is supposed to serve four member family for living. Main entrance to object is fluently connected to Zálešná VIII street. The house is made of two main volumes. The first one is created from two blocks into the L-shape. The second volume is block recessed into the first one. Main rooms for living are situated on a South of the building. Vertical structure which supports roof slabs are made of Ytong blocks. Roof slabs above first floor and a staircase is made of monolitic concrete. Roof above the second floor is composed of Spiroll panels. Drawings were created in Archicad software. Vizualizations were created using SketchUp, Artlantis and Photoshop softwares.
|
guest ::
RSS feed.