|
|
Calculation of parameters of induction motor using FEM
Pešek, Michal ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This project is focused on finite element method, for purposes of asynchronous motor modeling. Program FEMM is used here, which works with two-dimensional models. The model is based on an existing motor. Then was conducted a series of simulations that are used to calculate the parameters of the circuit model. Then was measured the existing asynchronous motor and performed the calculation of the circuit model parameters of the motor. Compared with data obtained from motor and models Then was compared their torque characteristics. Moments was identified at certain slip frequencies and voltage or current in circuit model.
|
|
|
Stray losses in magnetic material in the end of stator packet
Kopecký, Ivo ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
This thesis examines the magnetic field and magnetic flow at the end of the stator synchronous machine. This problem is solid using nonlinear magnetic resistive network, which is simulating by PSpice software. A simple model of stator, consisting of stator plates, air gaps and the two-thumbs, which hold the stator together. All of this is replace magnetic nonlinear resistive network, which is then divided into elements. According to these element is a simplified model solid and analyzed.
|
|
|
Sliding contact in electrical machine
Bernard, Ivo ; Skalka, Miroslav (referee) ; Veselka, František (advisor)
The work deals with the sliding contact of electrical machines. The work is focused on individual components of sliding contact and the evaluation qualitative criterions of certain components of sliding contact. In the final section is presented a comparative method that has been designed for large machines. In this work we used this method on a small machine.
|
|
|
Calculation of the cooling medium in the asynchronous
Trnka, Zbyněk ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
The aim of this master´s thesis was to model the fan for the induction motor, and then to solve this model using Ansys CFX in the terms of flow, when considering the different speeds of rotation of the rotor. The introduction of this work is dedicated to basic terms and definitions from spheres of fluid flow, cooling of the electrical machines, especially to the cooling of the asynchronous machine. There is also attention paid to losses in this machine. Finally, there is modeled radial fan and an air gap of specified induction machine. By using Ansys CFX the flow, which passes from the fan into the air gap, is analyzed.
|
|
|
Magnetic field calculating of transformer by using conducting model
Bláha, Martin ; Skalka, Miroslav (referee) ; Kurfűrst, Jiří (advisor)
The paper deals with conductivE-resistive network. Use of this network is modeled transformer. The model is implemented in simulation program PSPICE and Simscape. To evaluace the results were used the values obtained using the finite element method. A simple model of the transformer has been replaced by rezistor network conductivity, which is divided into elements. According to these elements is a simplified model designed and analyzed
|
|
|
Design and analysis of electromagnet
Macek, Pavel ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This work deals with a proposal and an analysis of electromagnets. The first chapter is an introduction into solve of the problem. In the second chapter there is a general discussion about basic relations of the electromagnetic field. The third chapter is dedicated to the operation principle and construction of electromagnets and is supplemented with their common classification. The fourth chapter introduces the Finite Element Method and the FEMM programm. The fifth chapter is dedicated to the analysis of the DC electromagnet, the sixth chapter analysis single-phase AC electromagnet. In the seventh chapter there is a review of results of general analysis of both electromagnets.
|
|
|
Temperature measurement on electrical machines
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This work is trying do describe the temperature allocation on the electric machines. In the first part it is describing the temperature measurment, principals of measuring, thermocouples and a contactless measurment. In the second part, it is theoretically proceeding with engine types and a heat generation on them. In the third part, the work is describing simulation in the programs Autodesk Inventor and Ansys Workbench. In the next part, a work is showing the creation of a elektric machine model in already mentioned programs and a practical measurements of temerature allocation in the laboratory. In the conclusion, it is evaluating the measurment achievements and comparing the results of both used metods.
|
|
|
Analysis of the stator and rotor pack termination effect on the synchronous machine by FEM
Michailidis, Petr ; Valenta, Jiří (referee) ; Skalka, Miroslav (advisor)
This thesis deals with simulation’s possibilities of the electromagnetic fields in electrical machines. A finite element method is the final element technique. The content of this thesis is a model and mesh creation and electromagnetic simulation of synchronous machine. The stator and rotor pack termination effect on the synchronous machine.is analyzed by finite element method in ANSYS program. The type of the stator termination pack is described by four segments. The magnetic field distribution is deformed due to the material properties of used segments. In the next part a methodics of mesh creation is shown. The mesh quality (in term of elements number and elements shape) is important due to the solution accuracy and speed.
|
|
|
Mechanical Torque Analysis of Induction Machine Based on Magnetic Circuit Saturation
Skalka, Miroslav ; Bendl,, Jiří (referee) ; Voženílek, Petr (referee) ; Ondrůšek, Čestmír (advisor)
e main goal of this thesis is mechanical torque analysis of induction machine based on magnetic circuit saturation, oversaturated areas classification and the possibility of oversaturated areas reduction of their influence on machine properties. Whole problem is solved by finite element method in ANSYS program. Work is divided into the description and creating of electromagnetic model, a method of the induction machine equivalent circuit parameters determination, the electromagnetic field calculation by finite element method, experimental measurement using LabVIEW program with measurement accessories (PCIe card National Instruments), data processing program in DIAdem, results analysis of calculations in terms of magnetic circuit saturation, the influence of magnetic circuit material based on electromagnetic field distribution and the magnetic flux density along the air gap including spectral analysis using MATLAB and the electromagnetic torque and its parasitic torque components calculation.
|
|
|
Kogenerační jednotka mikro výkonu v RD
Pusztai, Radek ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
Bachelor paper on "Cogenerational unit of micro energy in a single-family house" occupies with analysis of usage and economical effectiveness of cogenerational installation in the single-family house. Results and used material are based on longtime knowledge of leading Czech and world companies and institutions. Paper is structed into two parts.
|
guest ::
RSS feed.