|
|
Analytic represantation of AC winding properties
Kubín, Tomáš ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
My bachelor thesis deals with the issue of overview diagram of magnetic fields of basic free-phase winding. It is divided into four parts.The first part focuses on basic winding types and types of their connection. The second part describes the issue of analytic calculation of the magnetic field intensity in the air gap of rotating machines. This description is easier and faster than modern method of final elements in some cases because it displays course of particular harmonics and their partial sums for selected magnetic fields. The third part presents Görges diagrams of basic winding types and finally there is a calculation of the winding factor shown on two examples in the fourth part.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
|
|
Design of industrial wiring system
Kytlica, Josef ; Bátora, Branislav (referee) ; Skalka, Miroslav (advisor)
This project deals with problems of industrial installation for luminous and drawer circuit and technological (motor driven) system also. Then is been described a technological system for connection and control problem of electrical machine. Then is described a drawing documentation includes disposal whole object, electrical machine connection into the switchboard, control boxes and control system. The next part contains a power circuit distribution from switchboard to all facilities including control system. The power circuit is shown in drawing documentation by the single-line diagram and the line scheme for control circuit. The technological equipments distribution includes main switchboard with cable trays are shown in disposition. In the technical report is described a whole project which advert on valid specification of ČSN.
|
|
| |
|
|
Thermal analysis of induction machine
Grmela, Petr ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
This thesis is dealing with thermal fields and the possibilities of their solution by a finite element method. Thereinafter thesis describe assembling a 3D model of induction machine with known parameters, and solving thermal field of the model by Ansys Workbench program and verification of these results by practical measuring on real machine.
|
|
|
Calculation of parameters of induction motor using FEM
Pešek, Michal ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This project is focused on finite element method, for purposes of asynchronous motor modeling. Program FEMM is used here, which works with two-dimensional models. The model is based on an existing motor. Then was conducted a series of simulations that are used to calculate the parameters of the circuit model. Then was measured the existing asynchronous motor and performed the calculation of the circuit model parameters of the motor. Compared with data obtained from motor and models Then was compared their torque characteristics. Moments was identified at certain slip frequencies and voltage or current in circuit model.
|
|
|
Stray losses in magnetic material in the end of stator packet
Kopecký, Ivo ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
This thesis examines the magnetic field and magnetic flow at the end of the stator synchronous machine. This problem is solid using nonlinear magnetic resistive network, which is simulating by PSpice software. A simple model of stator, consisting of stator plates, air gaps and the two-thumbs, which hold the stator together. All of this is replace magnetic nonlinear resistive network, which is then divided into elements. According to these element is a simplified model solid and analyzed.
|
|
|
Sliding contact in electrical machine
Bernard, Ivo ; Skalka, Miroslav (referee) ; Veselka, František (advisor)
The work deals with the sliding contact of electrical machines. The work is focused on individual components of sliding contact and the evaluation qualitative criterions of certain components of sliding contact. In the final section is presented a comparative method that has been designed for large machines. In this work we used this method on a small machine.
|
|
|
Calculation of the cooling medium in the asynchronous
Trnka, Zbyněk ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
The aim of this master´s thesis was to model the fan for the induction motor, and then to solve this model using Ansys CFX in the terms of flow, when considering the different speeds of rotation of the rotor. The introduction of this work is dedicated to basic terms and definitions from spheres of fluid flow, cooling of the electrical machines, especially to the cooling of the asynchronous machine. There is also attention paid to losses in this machine. Finally, there is modeled radial fan and an air gap of specified induction machine. By using Ansys CFX the flow, which passes from the fan into the air gap, is analyzed.
|
|
|
Magnetic field calculating of transformer by using conducting model
Bláha, Martin ; Skalka, Miroslav (referee) ; Kurfűrst, Jiří (advisor)
The paper deals with conductivE-resistive network. Use of this network is modeled transformer. The model is implemented in simulation program PSPICE and Simscape. To evaluace the results were used the values obtained using the finite element method. A simple model of the transformer has been replaced by rezistor network conductivity, which is divided into elements. According to these elements is a simplified model designed and analyzed
|
guest ::
RSS feed.