|
|
Feedwater heater design
Holčapek, Josef ; Tomáš,, Zdeněk (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals with the design of a feedwater heater. The aim of the work is to perform thermal, hydraulic and stress analysis. A preliminary technical documentation is also part of this work. The first part contains a summary of basic types of heat exchangers and processes of heat transfer. The main part is focused on thermal analysis to determine the main parameters of the heat exchanger. Next part is followed up by hydraulic analysis to determine the pressure drop of the heating water. After that is created design of heat exchanger with stress analysis of the proposed wall thicknesses of the shell, water chambers and tubesheet. Achieved results are summarized and evaluated at the end of the diploma thesis.
|
|
|
Steam boiler burning fytomass waste
Plot, Rostislav ; Skála, Zdeněk (advisor)
This thesis deals with the calculation of the boiler on stillage. Nowadays, when there's fossil fuels are just biomass seems adequate compensation. The great advantage of biomass boilers is a small amount of emissions, especially the greenhouse gas CO2. Of a given fuel composition is made thermal calculation and dimensioning of heat transfer surfaces of steam boilers. The resulting calculation must follow the parameters of steam at the outlet from the boiler.
|
|
|
Steam boiler for spruce bark burning-18t/h
Dračka, Lukáš ; Heinze, Bedřich (referee) ; Skála, Zdeněk (advisor)
To design a grate boiler with a natural circulation for burning of a pine bark with an output 18t/h is a primary objective of this dissertation. Individual parts of a boiler and it´s heat transfering surfaces were calculated after the working out of stoichiometric calculations from given element analysis of fuel. All computations have to fulfill several parameters: boliler output, temperature and pressure of an overheated steam.
|
|
|
Modernization of biomass heat plant.
Sedlák, Martin ; Fiedler, Jan (referee) ; Fiedler, Jan (referee) ; Skála, Zdeněk (advisor)
The thesis examines the suitability of a CHP project in Bystřice nad Pernštejnem, a small town in Vysočina region, Czech Republic, which is currently supplied by biomass central heating. It reviews situation and availability of renewable energy sources and opportunities for CHP both in the Czech Republic and in Europe, including the context of current global developments. The opening chapters are followed with the renewable energy project for Bystřice nad Pernštejnem itself. The current technology, availability of biomass fuel for a potential future project, and possible development of energy sources in the town are analysed. Three alternative solutions for the CHP plant are suggested, with proposal for the technology and economic analysis, and possible future steps of the town council are discussed.
|
|
|
Gas steam boiler design
Vacek, Jiří ; Bursa, Robert (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is a draft of a gas steam boiler with steam output of 200 t/h. The first part of the paper provides stoichiometric calculations, then there are calculations of the dew point, boiler efficiency and the amount of gas. After that, calculations and a draft of the combustion chamber are carried out and then heat balances are drafted. In the following text, geometric properties of individual heat exchanging surfaces are drafted. At the end, there are control calculations. This thesis contains a blueprint of the gas steam boiler.
|
|
| |
|
| |
|
|
Steam boiler with grate firing burning mix coal and wood (mixing ratio 30/70-wood)
Dvořák, Aleš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This diploma work attends to presentation of steam grid boiler for wood and brown coal burning in scale (30/70-wood) in load 60t/h, with parametres of outgoing vapour p=7MPa, t=490°C. The work is splitted to several chapters. At the beginning I’m going to make stechiometric calculation and entalpic calculations of air and compustion gas. After that I’m going to calculate heat balance, losses of boiler and set heat efficiency of boiler. Then I’m going to suggest combustion chamber of boiler and make heat calculation. After suggestion of combustion chamber I’m going to set proportions of pulls and heat-delivery surface. In last chapter I’m giong to check heat balance. Inclosure of my work contains drawing documentation of steam boiler.
|
|
|
Modern denitrification methods of coal fired boilers
Nárovec, Jiří ; Houdek, Ing Milan (referee) ; Skála, Zdeněk (advisor)
V současnosti musí velké energetické podniky k dodržení emisních předpisů, zejména pak vyžadovaných limitů NOx, uplatňovat denitrifikační metody. Tématem předkládané diplomové práce jsou moderních denitrifikační metody a jejich praktické uplatnění v lokálních poměrech uhelného kotle s parním výkonem 640 t.h-1 v elektrárně Počerady. Práce obsahuje rešerši moderních denitrifikačních metod používaných velkými uhelnými kotli se zaměřením zejména na sekundární denitrifikační metody. Jsou uvažovány dvě možné varianty denitrifikace – varianta 1 využívá selektivní katalytickou redukci (SCR) a varianta 2 selektivní nekatalytickou redukci (SNCR) společně s nízkoemisními hořáky a stupňovaným přívodem spalovacího vzduchu. Pro výběr vhodné denitrifikační metody jsou studovány investiční náklady jednotlivých variant – nižší investiční náklady (o 19.4%) slibuje varianta 2. Při srovnávání SCR se SNCR vyšlo najevo, že investiční náklady metody SNCR jsou 5krát nižší než metody SCR. V souladu s investičními náklady, s dispozicí kotle a se složitostí jeho instalace je pro navazující studium problematiky využita varianta 2. Stěžejní část práce se zabývá stanovením optimálního tzv. teplotního okna pro konkrétní metodu SNCR. Těžištěm práce je tepelný výpočet ohniště a části deskového přehříváku pro stanovený rozsah paliv a výkon kotle v rozmezí 60-100%. S uvažováním výsledků z výpočtu jsou navrženy dvě vstřikovací roviny, které mají zaručit vysokou efektivitu denitrifikačního procesu při uvažovaných provozních podmínkách kotle. Diplomová práce rovněž diskutuje obecnou vhodnost instalace SNCR a SCR ve stávajících uhelných kotlích.
|
|
|
Calculation of Brown Coal Boiler for SCR Application
Mizerovský, Karel ; Bursa, Robert (referee) ; Skála, Zdeněk (advisor)
This Master´s thesis deals with the verification calculation of boiler which burns brown coal for the application of the selective catalytic reduction method. The thesis is divided into several parts. In the first of all is performed the calculation of the furnace chamber which involves stoichiometrics calculations and enthalpy calculations of air and flue gas. In the second part the heat balance of the boiler, the boiler losses and the thermal efficiency are determined. After all the heating surfaces are calculed for the verify the dimensions. In the conclusion of the thesis we looked for the temperature range which is used for the SCR application. Then the improvements for the appropriate temperature range are designed.
|
guest ::
RSS feed.