|
|
Specification Languages and Tools for Analysis and Verification of Security Protocols
Ptáček, Michal ; Trchalík, Roman (referee) ; Očenášek, Pavel (advisor)
This diploma thesis is focused on the analysis of security tools, which are commonly used for automatic verification of security protocols mainly. These security protocols are used for creation of private communication channells in insecured networks. Security will never be perfect, so finding of weaknesses in security protocols is always necessary and we need to improve these protocols. In this diploma thesis I have focused on looking for various verification tools on Internet. Subsequently, I have described each tool in this thesis, in way that each reader can easily find out, which tool is for him useful and which is not. I have summarized main benefits and drawbacks of each tool at the end of his description.
|
|
|
Analysis of parallel operation of nodal areas of 110 kV Krasikov and Neznasov transformers stations
Kostkan, Petr ; Kopička, Marek (referee) ; Ptáček, Michal (advisor)
Currently, the nodal areas of Neznášov substation and Krasíkov substation, which belong to ČEZd distribution network 110 kV – East, are operand as separate units. In the defined setting, each nodal area comprises of two 400/110 kV transformers. In the case of failure of the transformer T401 or T402, the criterion N-1 for twenty percent of the rated output is not met. Such problem can be solved by parallel operation of nodal areas of Neznášov substation and Krasíkov substation. The principal as well as practical aim of this thesis is to interconnect the bridge operated connection in separated areas into parallel/loop operation of nodal areas (supplied by 400/110 kV transformers). Computing software is used to calculate the steady state and short-circuit conditions in the distribution network 110 kV for separate and parallel operation of mentioned nodal areas. Power flow analysis is aimed at assessment and evaluation of voltage conditions, transformers loading (400/110 kV and 110/vn) as well as 110 kV lines loading. Obtained short-circuit indices is used to examine short-circuit, withstand capability of the 110 kV substation. Finally, benefits as well as drawbacks of the separate and parallel operation are compared and evaluated. If necessary, the technical arrangements are proposed/designed in order to allow parallel operation of nodal areas Neznášov substation and Krasíkov substation.
|
|
|
Measuring system for laboratory generator unit
Pochop, Zbyněk ; Ptáček, Michal (referee) ; Orságová, Jaroslava (advisor)
This Master thesis deals with the measurement and description of the synchronous generator , which is located in laboratories. First, the thesis deals with the theory of synchronous machines. This is followed by a detailed description of the involvement of laboratory genetatory unit. Subsequently, the work deals with the measurement of basic parameters of the synchronous machine and also quite thoroughly devoted to displaying transients at various levels on the digital oscilloscope. The dissertation aims to compare theoretical ideas with the measured results. Finally, it is shown what could be measured next to the generator set.
|
|
|
Stabilized operation of the 220 kV power line
Staněk, Pavel ; Ptáček, Michal (referee) ; Blažek, Vladimír (advisor)
This thesis deals with methods of solving lines under voltage levels of very high transmission voltage and extra high voltage. The first, theoretical part of this paper analyses different methods how such lines are solved. In particular, an accurate solution is provided simulated by means of a line with evenly distributed parameters, and an approximate solution simulated by means of a line with lumped parameters. Furthermore, special cases of steady running conditions of the line are reviewed, such as no-load running, short-circuit and line operation with natural load. In conclusion of the theoretical part is given a general method of solving an extra-high-tension and extra high voltage network; also, some graphical methods of solving such networks are shown including their brief description. The second, practical part of the present paper involves application of the above mentioned methods of solution on a specific line with given parameters, solving conditions at the power line under steady running conditions and in special cases of the line operation. The conclusion of the thesis summarizes the obtained results.
|
|
|
HV grid model in PSCAD
Tomšů, Vojtěch ; Ptáček, Michal (referee) ; Kopička, Marek (advisor)
This thesis deals with the issue of computer modelling and electroenergetic calculations. The first part focuses on the description of the PSCAD program and selected competitive software. There are listed main characteristics, usage and subsequently the overall comparison of the programs with potential use in electroenergetic industry. It also lists the basics of PSCAD and description of its working environment. Another section deals with the calculation of parameters of overhead lines, transmision lines substitute with pi-section and the process of pi-section phasor diagram construction. In the next part, there is a model of HV grid in the form of pi-section. As reference values for simulation were used values from exercise of the subject Distribution of electric energy. Output values obtained from the simulation in PSCAD were used to create a phasor diagram in Matlab. The last part focuses on the issue of calculating the natural power, cascade and parallel sections sorting and a simple case of three-phase fault.
|
|
|
Island operation of the waste to energy facility
Doležal, Václav ; Paar, Martin (referee) ; Ptáček, Michal (advisor)
The purpose of this bachelor’s thesis is mainly a technological explanation of, be it present-day or potentionally future, possibilities of waste-to-energy facilities technology in Czech Republic and explanation of technological devices used in SAKO Brno institution for successful transition to island mode operation. A significant part is a research on the role of the discussed waste-to-energy facilities during power recovery in distribution network, while taking into consideration the ability to transition to the island mode operation, thanks to which it can hold an important position during the process and the analysis of a possible scenario of black-out, that the waste-to-energy facilities of SAKO Brno company couldn’t cross over to island mode operation, based on the results of the black system event that took place in the year 2013.
|
|
|
The price of electricity and the choice of appropriate distribution rate
Hromek, Lukáš ; Ptáček, Michal (referee) ; Macháček, Jan (advisor)
This work is focused on the price of electricity, components that compose and factors affecting this price. Includes brief overview of energy legislation, namely to the rights and obligations of distributors of electricity, energy traders and customers. Furthermore, the work deals with the researches of the energy market in the Czech Republic, the different rates of selected suppliers and evaluating their suitability for the customer.
|
|
|
The partial model of sewage treatment plant
Novák, Petr ; Ptáček, Michal (referee) ; Radil, Lukáš (advisor)
The thesis deals with wastewater treatment plants (WWTPs). For the energetic self-sufficiency of the WWTP, it is necessary to study the operational background, equipment and their possible operational prediction for energy distribution over time and adaptation to any renewable energy (RES). It is also possible to optimize the operation to maximize the equalization of the input power. We're talking about small WWTPs up to 500 EP. Large purification blocks are also an option. The student will evaluate the current state of knowledge and try to design and possibly implement the financial savings of the given concept.
|
|
|
Reactive power changes at the TSO-DSO interconnection point by RES power factor regulation
Pololáník, Pavel ; Fiala, Zbyněk (referee) ; Ptáček, Michal (advisor)
This bachelor thesis deals with the long-term development of active, and primarily reactive energy flow at 110/22 kV distribution transformation points in the E. ON distribution network. It compares two different areas (city vs. countryside), differing in type of used distribution network and in composition of decentralized energy resources. Another point of this thesis is to describe current controlling possibilities for decentralized resources installed to the voltage level of 22 kV considering reactive power compensation. Thesis introduces proposed methods and conditions used in remote mass controlling of power factor of decentralized resources. There is mentioned an evaluation of an already performed test whose purpose was to verify possibility of influencing reactive power at the interconnection point between distribution and transmission system. The factors causing the overflow reactive power were analysed. In this thesis were analysed factors, which causing overflow reactive power from distribution to the transmission system. This analysis will be the basis for future use of mass reactive power regulation.
|
|
|
Design and implementation of the soil resistivity measurement system
Dirbák, Štefan ; Ptáček, Michal (referee) ; Vrána, Michal (advisor)
This diploma thesis deals with research and study of soil impedance measurement and soil resistivity. Currently, the issue of measuring and determining soil resistance is ensured through the gradual measurement of certain soil parameters at individual points of the surface (or depth of the ground). This thesis focuses on the idea of measuring soil resistance on a certain area using a network of electrodes through a suitably designed test, measurement and evaluation system. Such an approach may find application in the need to determine soil parameters (such as resistivity) on a specific demarcated area (or depth). The prospect of such an application can be seen in saving time, energy and money needed to measure the soil resistivity of a certain area (as opposed to gradual point measurements). The configuration possibilities of OMICRON CPC 100 measuring instrument were used for the design and implementation of the measuring system for the mentioned purpose. The work is completed by verification of the proposed solution by real measurement with evaluation of the results.
|
guest ::
RSS feed.