National Repository of Grey Literature 57 records found  previous11 - 20nextend  jump to record: Search took 0.00 seconds. 
Design of low-voltage supply and reference block based on the bandgap reference
Zwiener, Jan ; Kledrowetz, Vilém (referee) ; Prokop, Roman (advisor)
This diploma thesis deals with the analysis and evaluation of four different circuit solutions that are used to construct a stable reference voltage. In the literature, these circuits are referred to as bandgap references, and this thesis discusses the principle of their operation. Based on the achieved results, one circuit solution was selected, which forms the basis of the designed device containing eight reference voltages with values (0.8; 1.0; 1.2; 1.5; 1.8; 2.0; 2.5; 3.3) V and one voltage supply, to which one of the reference voltage values can be assigned using a binary code. This device contains sources of four reference currents with values (1; 2; 4; 8) µA.
Design of Gm-C integrator for asynchronous delta-sigma modulators
Kekelák, Miroslav ; Prokop, Roman (referee) ; Kledrowetz, Vilém (advisor)
This thesis deals with the study of the design of Gm-C integrators suitable for asynchronous delta-sigma modulators. The theoretical part of the thesis describes the principle of synchronous and asynchronous delta-sigma modulators. A separate chapter is devoted to integrators used in Delta-sigma modulators. Another separate chapter is devoted to transconductors and linearization problems. In the practical part, selected circuits were implemented in I3T80 technology and verified in Spectre simulator.
Unified verification environment for digital part of automotive mixed-signal integrated circuits
Petráš, Samuel ; Dvořák, Vojtěch (referee) ; Prokop, Roman (advisor)
This thesis is concerned with unified verification environment for the verification of small designs of the digital part of integrated circuits with mixed signals. By unified verification environment is meant an environment suitable for both simulation and emulation. The first chapter describes the current verification methods of such designs. The second chapter presents the requirements that emulation places on the verification environment implemented according to the Universal Verification Methodology (UVM) and the attached implementation of proposed environment. The third chapter contains practical knowledge gained during the implementation of the unified verification environment, problems and their solutions, as well as several comparisons between simulation and emulation.
SAE J2716 SENT protocol signal driver
Mutina, Petr ; Levek, Vladimír (referee) ; Prokop, Roman (advisor)
This diploma thesis deals with design of SENT protocol output driver for automotive applications. Output driver is designed with respect to variability of output capacitance (in rage from 0 to 10 nF). Important feature of output driver is output signal shaping to limit electromagnetic interference. First chapter deals with theoretical analysis, current solution is discussed too. Second chapter of this thesis is focused on design of concept. In third chapter design of output driver is discussed, in last chapter simulation results of the design are presented.
Thermal dissipation optimization of LED Driver devices NCV78964 and NCV78925
Rejthar, Martin ; Boušek, Jaroslav (referee) ; Prokop, Roman (advisor)
Thesis is aimed at automotive DC/DC convertor analysis. It introduces categories of DC/DC convertors by their architecture. Converters are then divided to step-up and step-down. Later the types of power losses are introduced. Theory is closed with thermal design rules and cooling of integrated circuits. After basic convertor analysis, one specific Integrated Circuit is described in more detail. Especially its principles of operations and this IC is used in an evaluation board. Thesis predicts the thermal parameters of modules and these results are compared with measured data, acquired on modules, that were designed too.
Electro-thermal model and simulation of integrated circuit
Sikora, Martin ; Kledrowetz, Vilém (referee) ; Prokop, Roman (advisor)
Thermal effects in integrated circuits have increasing impact on chip's lifetime and function. For this reason, the chips must be subjected to electro-thermal simulations prior to the launch of production in order to avoid potential circuit failures. Therefore, in the first part of this diploma thesis these effects and methods of creating thermal models are described. The thesis also explores available tools for electro-thermal simulations and the way these simulators work. In the practical part of the thesis, the operation of electro-thermal simulation in the Eldo tool is verified, a method of automated thermal network creation is proposed and a application for its generation based on the circuit layout is implemented. The results of the electro-thermal simulation with the generated thermal network are compared with the results of the currently used method.
Channel Merging Techniques for improving Dynamic Range of ± 10 V Signal Chain Channel
Dušek, Samuel ; Prokop, Roman (referee) ; Kledrowetz, Vilém (advisor)
Cílem této diplomové práce je změřit a vyhodnotit parametry techniky slučování kanálů, která je momentálně implementována v součástce AD7606C firmy Analog Devices. Poté, na základě výsledků z měření, navrhnout a odsimulovat několik možností, pomocí kterých by tato technika mohla dosahovat vyšších hodnot dynamického rozsahu a celkového harmonického zkreslení. V průběhů práce bylo zjištěno, že pomocí zvýšení zesílení kanálu s nižším rozsahem společně se snížením mezní frekvence celého signálového řetězce může tato technika dosahovat až 118.6 dB dynamického rozsahu, což je o 3.6 dB více, než bylo změřeno na AD7606C. Dále také bylo zjištěno, že pomocí jednoduchého algoritmu implementovaného v logickém bloku, je možné dosáhnout imunity vůči hodnotě externího rezistoru, který zákazníci používají jako součást anti-aliasingového filtru.
Design of a low power internal voltage regulator for automotive applications
Šojdr, Marek ; Kledrowetz, Vilém (referee) ; Prokop, Roman (advisor)
This master’s thesis deals with the design of integrated voltage regulator. Topologies of linear voltage regulators and their stability are discussed. Part of the thesis deals with description and simulation of blocks of selected regulator topology. The thesis describes the difficulties of integrated circuit design in the automotive industry. The electrical scheme of the designed regulator is explained. The work also focuses on the stability of designed regulator. Then presents simulations. It discusses the layout of integrated circuits and the designed voltage regulator.
Design of low-voltage supply and reference block based on the bandgap reference
Mudroch, Michal ; Kledrowetz, Vilém (referee) ; Prokop, Roman (advisor)
In this diploma thesis there is elaborated design of low-voltage power supply block using I3T25 technology. The theoretical part describes the basic structures used in the design, using CMOS and bipolar devices. Furthermore, the properties and the analysis used in the evaluation are described. In the design part there is an elaborated design of individual parts, including voltage references, current references, DAC converter, operational amplifier. In the last part, the power supply block is subjected to simulations for verification of temperature compensated output variables and analyzed circuit functionality.
Integrated temperature sensor bipolar core
Fránek, Jakub ; Prokop, Roman (referee) ; Kledrowetz, Vilém (advisor)
Cílem této práce je popsat možné způsoby realizace teplotního senzoru na křemíkovém čipu v běžných CMOS výrobních technologiích a představit konkrétní implementaci analogového jádra teplotního senzoru využívajícího bipolární tranzistory ve výrobní technologii TSMC 110. Techniky jako chopping, dynamic element matching nebo trimování byly použity k navržení obvodů, jejichž simulovaná 3 přesnost měření je ±3.5 °C bez trimování nebo ±0.6 °C s po jedné trimovací operaci napříč vojenským teplotním rozsahem. Navržené obvody zabírají pouze 0.012 mm čtverečních plochy čipu a jejich celkové parametry jsou srovnatelné s výsledky současných publikovaných prací.

National Repository of Grey Literature : 57 records found   previous11 - 20nextend  jump to record:
See also: similar author names
3 Prokop, Radek
2 Prokop, Radim
2 Prokop, Rudolf
Interested in being notified about new results for this query?
Subscribe to the RSS feed.