|
|
Driver of Semiconductor laser for 1Gbit/s
Melichárek, Radek ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This thesis describes a design of a driver for a specific type of laser VCSEL. Models for simulation in PSpice OrCAD have been developed for this type of laser. The qualities of the designed driver aim to be equal to the integrated drivers that are available and to remove some of their drawbacks. It consists of the following components: input LVPECL receiver/driver, differential amplifier, fixed source of a modulation current, circuit of automatic power control. Regulation of the modulation current is dealt with atypically using an aptly selected input LVPECL receiver/driver which enables to control the voltage amplitude on its output by means of voltage. The thesis also describes different types of coupling between laser and driver. The most appropriate alternative is selected taking into consideration the unconventional design of the driver. The connection of the driver is supplemented by a microcontroller which secures control of output optical power by means of a serial bus RS232.
|
|
| |
|
|
Control and monitoring unit for optical link station
Ovčáček, Martin ; Kolka, Zdeněk (referee) ; Prokeš, Aleš (advisor)
The aim of Master's thesis "Control and monitoring unit for optical link station" is design of hardware and software of unit, which provides remote control and data transfer through Internet. It is required monitoring and setting analog parameters of optical link station by web service. It includes description of Ethernet and net protocols. The core of unit are microcontroller C8051F120 and ethernet controller CP2200 made by Silicon Laboratories.
|
|
|
Control and monitoring unit for optical link station
Podzimek, David ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
The aim of Master thesis "Control and monitoring unit for optical link station" is a web server, enabling communication microcontroller with the user. The communication is based on TCP/IP model. Work an overview of the various parts of the TCP/IP model. The main part of this work is devoted to the software created. The core of unit are microcontroller C8051F120 and ethernet controller CP2200 made by Silicon Laboratories.
|
|
|
Optimization of LoRaWAN transmitter final stage
Hrbek, Tomáš ; Prokeš, Aleš (referee) ; Hanák, Pavel (advisor)
This diploma thesis deals with optimization of transmitter amplifier parameters for LoRaWAN network. The issue of optimization is first based on the conditions of ETSI EN 300 220, which takes into account the eventuality of interference the adjacent channels in the band. The optimizations are designed specifically for the Qorvo RF5110g integrated circuit, so that the amplifier meets the requirements of the above standard at the limit of the maximum allowed output power and also with respect to radio ecology.
|
|
|
Paralel Interface controlled by USB
Vondra, Marek ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
Bachelor‘s work is bent on usage busbar USB, in this case on interface inverter USB –> 14-bit parallel port, whereupon subsequently will add next device namely quadrature modulator. Busbar USB was elect thanks his universality as well as possibilities transfer data big at speeds of to the of other incorporate arrangement. Work further deal with resources for performance problems, especially so analysis selection fit type controller for USB, his setting and programmed, programmed drivers for system Windows as well as service programme in system Matlab. Bachelor‘s work tie together on diploma work Ing. Igor Majko, because choice controller was in either event same that the suggested construction inverter and foreshadowed possibility next progress in buckthorn problems.
|
|
|
Programme for channel coding demonstration
Závorka, Radek ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
The main subject of this thesis is creating a programme, used for channel coding demonstration. This programme will be used for teaching purposes. The programme contains various codes from simple ones, to those which almost reach Shanon’s channel capacity theorem. Specifically these are the Hamming code, cyclic code, convolutional code and LDPC code. These functions are based on theoretical background described in this thesis and have been programed in Matlab. Practical output of this thesis is user interface, where the user is able to input information word, simulate transmission through the transmission channel and observe coding and decoding for each code. This thesis also contains a comparison between individual codes, concerning bit-error rate depending on SNR and various parameters. There is a computer lab with theoretical background, assignment and sheets for convenient accomplishment of each task.
|
|
|
Shortwave power amplifier
Fiala, Roman ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This master’s thesis describes RF power amplifier design. The designed amplifier has been built. The first three chapters outline basics about radio frequency amplifiers. The basic theory needed for amplifier implementation is also described there. In the fourth chapter the power amplifier is designed. The design is based on the theoretical knowledge. Complete amplifier contains RF preamplifier, power amplifier and filters. The OrCAD PSpice, Ansoft Designer SV and EAGLE programs have been used for the design and verification of some sections of circuits. Measurement results of the built amplifier are in the fifth chapter. This thesis contains also the draft for laboratory exercise.
|
|
|
Universal wireless communication link using ZigBee modules
Kyselý, Tomáš ; Vychodil, Josef (referee) ; Prokeš, Aleš (advisor)
The work deals with the transmission of information via wireless ZigBee 802.15.4 standard. It describes the function, method and determination of this technology, the transmission system and security of information between ZigBee devices. It also shows the ability to connect ZigBee module to the computer, configure it for use on the network and comunicating in the network. Finally proposes the simplest diagram and PCB for the application.
|
|
| |
guest ::
