|
|
Tools for shear spinning technology
Kantor, Miroslav ; Štroner, Marek (referee) ; Peterková, Eva (advisor)
The issue of this bachelor’s thesis are tools for shear spinning technology. The work also contains a general description of the principles of shear spinning technology, its division and use. There is also mention of the machines used for this technology. In conclusion there is an example of produced components and self-evaluation of the issues examined by the author.
|
|
|
Manufacturing of the steam attemperator protective liner
Kukla, Petr ; Lidmila, Zdeněk (referee) ; Peterková, Eva (advisor)
The Bachelor´s thesis deals with the innovation of the manufacturing of the steam attemperator protective liner. The part will be made of low – alloy steel EN 10216-2 10CrMo9-10. The presented work contains an overview of possible production methods, where the technology of pipe end flaring with a fixed mandrel was chosen as the most suitable. The required material parameters were obtained by the tensile test. The application of the selected technology method was verified by analytical calculations and FEM simulation. According to the determined forming force (810 kN), an electro – hydraulic press OMCN 164 with nominal force 1000 kN was chosen. This machine is fully sufficient for the production of this component. The risk of occurring of a defects was excluded based on calculations and simulation. There was assessed considerable financial saving over 53 % in the technical and economic evaluation. In conclusion, this optimization of production is technically acceptable.
|
|
|
Manufacturing of chain wheel for BMX bike
Figar, Erik ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The thesis deals with the design of suitable technology for the production of BMX sprocket made of sheet metal 14 220.3, with a thickness of 4 mm. The production series is 200,000 units per year. Following the analysis of different production options, fine-blanking technology has been chosen as the most suitable precision cutting technology. A technological proposal has been created, which includes the choice of a suitable appropriate blank (sheet metal 4x2000x6000 mm) as well as the design of a shearing tool with the corresponding drawing documentation of its selected parts. On the basis of the calculated values, HFA 4500 plus hydraulic triple action press manufactured by the Feintool company was selected as a production machine. In the last stage, technical and economic assessment of the efficiency of this production was performed.
|
|
|
Explosive forming
Palán, David ; Dohnal, Ivo (referee) ; Peterková, Eva (advisor)
The thesis elaborated in frame of bachelor studies represents literary studies focused on technology of explosive forming. The thesis presents used methods of explosivr forming, describes principles of individual methods, used jigs, tools, explosives and last but not least provides overview of manufactured components and application of the technology these days
|
|
|
Production of universal opener by fineblanking technology
Kučera, Radek ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The aim of the thesis is to design a manufacturing technology of a part of the universal opener with an innovated design. The component is made of stainless steel 17 240 (X5CrNi18-10). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size (200 000 pieces) and to the required quality of the component the fineblanking technology has been selected. For the manufacturing of the component a triple action hydraulic press HFA 3200plus has been chosen. This press will be coupled in production line with a feeding line FBA 8/300. The main point of the thesis is to design a cutting tool and to create a drawing documentation. Another part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
Technological tests of pipes
Horák, Michal ; Staněk, Vojtěch (referee) ; Peterková, Eva (advisor)
The submitted project created in the bachelor studies of B-STI Machinery engineering is focus on problematic of technological tests of pipes. Based on the research of literature and internet mentioned problematic the bachelor thesis describes principle of individual technological tests, the procedure for the evaluation and application. For a complete picture of test tubes in the thesis are also given basic information about the mechanical tests.
|
|
|
Precision forging
Bužga, Petr ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
The thesis deals with methods, procedures and possibilities of precision forging. After the initial analysis methods of die forging with collar also comprises an overview, analysis and description of methods of precision forging, including a technological evaluation in view of technical possibilities, investment requirements and expected benefits. The main emphasis is laid on the technological conditions, procedure, on the construction of the dies and forging devices.
|
|
|
Methods of 3D bending
Kráčmar, Lukáš ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The project is developed in the context of a bachelor's degree in Mechanical Engineering and deals with an overview of modern methods of 3D bending part. The paper presents the different methods of 3D bending components that are produced by these methods and machines on which these components produce.
|
|
|
The Production Technology of unrotary part with flange
Andres, Tomáš ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
Bachelor´s thesis describes design of the production of unrotary part with flange made by drawing technology. Produced component is a single cylinder head cover four stroke engine, which is equipped with holes for attachment to the cylinder head and the spark plug hole. The prodiction series is 500 000 pcs per year.The material used for production is deep draving steel DC 04 (ČSN 11305). For the production was designed drawing tool and by the calculating required drawing forces was selected power presss VIVEK MACHINE TOOLS type VPPP - 10 with force 2000 kN. At the conclusion was evaluated technical and economic evaluation of production by seting a tipping point.
|
|
|
Manufacturing of belt drive cover
Rösner, Michal ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
Master’s thesis submit a concept for belt drive cover manufactured by ČSN 411320.21, a 1.5 mm thick material for series 10 000 pieces. On the basis of manufacturing method are presented problems around drawing, the parameters, used machine with tool design. For deep drawing operations were carried out control, computing technology, a hydraulic pres CTH 250 selection, designed set of drawing tools, simulation by AutoForm software, a technical economic evaluation, break-even point and supported by drawing documentation.
|
guest ::
RSS feed.