|
|
Conceptual design of air- mobil
Podhorský, Matěj ; Zikmund, Pavel (referee) ; Píštěk, Antonín (advisor)
The topic of the thesis is a conceptual design of a roadable aircraft. The comparison of existing concepts is made, as well as description of proposed solution, aircraft mass analysis, basic aerostatic calculations, flight and gust envelope calculation and a design of truss construction of the fuselage. The CS-VLA, alternatively ELSA-K, has been used as a certification base. The compliance to this certification specification is one of the goals of this thesis.
|
|
| |
|
|
Retractible landing gear design for Z 143 LSi airplane
Gregor, Jiří ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
|
|
|
Replica Design of L-40 "Meta Sokol " Airctaft - fuselage
Růžička, Miroslav ; Pešák, Miroslav (referee) ; Píštěk, Antonín (advisor)
This diploma thesis deals with the design of all-metal construction of fuselage of the replica L-40 Meta Sokol aircraft on the basis of CS-VLA regulation. As far as the aircraft is concerned, the thesis establishes the load of tail surfaces, landing gear and engine bed. Futhermore, it designs the construction of fuselage, tail landing gear, including the system of its retraction, wing-fuselage connection, engine bed and the primary design of cockpit. In the end, the thesis focuses on the fuselage production technology.
|
|
|
Design of single seat aiirplane by the UL - 2 regulation
Kövér, Ondřej ; Schoř, Pavel (referee) ; Píštěk, Antonín (advisor)
Bachelor´s thesis solves conceptual design of oneseater aircraft by the UL-2 regulations, that is up to 300 kilograms of take-off weight. In the first part of the thesis, there is survey of similar aircrafts and summary of their important characteristics. In further section are possible conceptions and the best choice of them outlined. Afterwards are characteristics of carrier surfaces, load calculation and flight envelope mentioned. The last part deals with calculation and design of engine mounting.
|
|
|
Adaptive parameterization for Aerodynamic Shape Optimization in Aeronautical Applications
Hradil, Jiří ; Rudolf, Pavel (referee) ; Růžička, Pavel (referee) ; Píštěk, Antonín (advisor)
Cílem mé disertační práce je analyzovat a vyvinout parametrizační metodu pro 2D a 3D tvarové optimalizace v kontextu průmyslového aerodynamického návrhu letounu založeném na CFD simulacích. Aerodynamická tvarová optimalizace je efektivní nástroj, který si klade za cíl snížení nákladů na návrh letounů. Nástroj založený na automatickém hledání optimálního tvaru. Klíčovou částí úspěšného optimalizačního procesu je použití vhodné parametrizační metody, metody schopné garantovat možnost dosažení optimálního tvaru. Parametrizační metody obecně používané v oblasti aerodynamické tvarové optimalizace momentálně nejsou připravený na komplikované průmyslové aplikace vyskytující se u moderních dopravních letounů, které mají šípová zalomená křídla s winglety a motorovými gondolami, přechodové prvky spojující např. trup s křídlem atd.. Existuje tedy potřeba nalezení obecné parametrizační metody, která bude aplikovatelná na širokou škálu různých geometrických tvarů. Free-Form Deformation (FFD[1]) parametrizace může, vzhledem ke svým schopnostem při zacházení s geometrií, být odpovědí na tuto potřebu. Adaptivní parametrizace by se měla být schopna automaticky přizpůsobit danému tvaru tak, aby byly její kontrolní body vhodně rozmístěny. Což umožní dostatečnou kontrolu deformací objektu, která zaručí možnost vytvoření optimálního tvaru objektu a splnění geometrických omezení. Primární aplikací takové parametrizační metody je deformace tvaru objektu. Dalším navrhovaným cílem je modifikace FFD parametrizační metody pro současné deformace tvaru objektu a CFD výpočetní sítě, umožnující velké deformace objektu při zachování kvality výpočetní sítě.
|
|
|
Design of new konception of the structural design of the main wing hinges of the Z 242
Hála, Aleš ; Augustin, Petr (referee) ; Píštěk, Antonín (advisor)
This diploma thesis deals with modernization of the Z 242 L aircraft wing. The main emphasis is given to the connection of the wing and fuselage. The new concept of both main and rear wing spar is designed together with integral fuel tank. The strength of the structure is evaluated analytically and numerically by use of Finite element analysis. Wide range of milling operations is implemented into manufacturing process as well. This thesis shows how to innovate current aircraft with respect to feasibility of the design in case of future project realization.
|
|
|
Aircraft design regulations
Seďa, Ondřej ; Pešák, Miroslav (referee) ; Píštěk, Antonín (advisor)
Baccalaureate work includes set of regulatins needs for aircraft construction. Out of printed are caregory qualification and using after european regulations CS, american regulations FAR and regulations for ultra-light aeroplanes. Mentioned are also regulations for operation and pilots training.
|
|
| |
|
|
Replica Design of L-40 "Meta Sokol " Aircraft - wing
Pluhař, Tomáš ; Jebáček, Ivo (referee) ; Píštěk, Antonín (advisor)
This diploma thesis targets in concept of wing, aileron, flap and main undercarriage of the ultralight replication of the plane L-40 called Meta Sokol. The thesis developed from cooperation with two other members of the team – Alice Lipková (aerodynamics, power) and Miroslav Růžička (fuselage, tail unit and rear gear). The first part of this diploma thesis is concerned with load and concept of structure of the wing. At first the flight envelope is specified, then charakteristics of shearing force, bending moment and torsion moment are determined spanwise. The concept and subsequent strength verification of structure of the wing is also solved. The same process is claimed to concept of the aileron and the flap. The second part of this diploma thesis is dealt with main landing gear, its support, structure, springing and the principle of retraction. The final passage is devoted to load of the undercarriage.
|
guest ::
