|
|
Modelling the Oil Lubrication System of Turbocharger
Breckl, Lukáš ; Hliník, Juraj (referee) ; Novotný, Pavel (advisor)
The diploma thesis contains a research part focused on turbocharger construction, engine lubrication system and turbocharger, basic physical properties of lubricating oils and hydrodynamics. The purpose of this thesis is to create analytical and CFD computational model of turbocharger lubrication system. Output pressures and the loss of specific energy are determined.
|
|
|
Lubricant Gap Shape Optimization of the Hydrodynamic Thrust Bearing
Ochulo, Ikechi ; Vacula, Jiří (referee) ; Novotný, Pavel (advisor)
The objective of this Master's thesis is to find, using genetic algorithm (GA), an optimal profile for lubricating gap of a thrust bearing of a turbocharger. Compared to the analytical profile, the optimal profile is expected to have minimized friction for an equivalent load capacity. Friction minimization is one way to increase the efficiency of the thrust bearing; it reduces the friction losses in the bearing. An initial problem was given: a thrust bearing with Load capacity 1000 N, inner and outer radii of 30mm and 60mm respectively, rotor speed of 45000 rpm and angle of running surface of $0.5^0$. Lubricant properties were also provided for the initial problem: oil density of $ 840 kg/m^3$, dynamic viscosity $(\eta)$ of 0.01 Pa.s With this data, the numerical solution of the Reynolds equation was computed using MATLAB. To obtain more information, the minimum lubricating gap thickness was also computed using MATLAB. With this information, the shape of the analytical profile, and its characteristics were found. The analytical profile was then used a guide to create a general profile. The general profile thus obtained is then optimized using GA. The characteristics of the generated profile is then computed and compared to that of the analytical profile.
|
|
|
Design of Turbocharger Bearing for Low Viscosity Oils
Plánka, Jakub ; Dlugoš, Jozef (referee) ; Novotný, Pavel (advisor)
The first part of the thesis describes journal bearings characteristics, their function and lubrication. The second part of the thesis is about a rotor-dynamics issue and how to use numerical and experimental methods for verification of a new bearing design. The practical part of the thesis is focused on analyse a current design of bearings in MBS. In the last part has been made and verified a new bearing design.
|
|
|
Over-expanded internal-combustion engines
Novotný, Pavel ; Janoušek, Michal (referee) ; Drápal, Lubomír (advisor)
At the beginning there is a short history of over-expanded engines. Subsequently, the thermodynamics of ideal over-expanded cycles are analysed and compared with the ideal Otto cycle. The thesis also deals with some design solutions for achieving over-expansion in an internal combustion engine. In the thesis there are also selected over-expanded engines from leading world carmakers. At the end the thesis deals with systems with variable compression ratio.
|
|
|
Design of Car Initiator
Suchý, Jan ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
The bachelor thesis is focused on proposal solution of automotive initiator construction and design. The proposal is being carried out with regard to the need to ensure the maximum functionality of the whole element. As for the choice of materials and used technology the costs and procedures commonly used today are not being taken into account. The main objective is to eliminate the shortcomings of current automotive initiators and the proposal of technological procedures in the production of a new component.
|
|
| |
|
|
Energy Recovery from Exhaust Gases in an Electric-assisted Turbocharger for Hybrid Vehicles
Calábek, Daniel ; Kudláček, Petr (referee) ; Novotný, Pavel (advisor)
Obsahem této diplomové práce byla vhodnost využití turbodmychadla s přidruženým motor-generátorem pro vybrané typy hybridních vozidel a následná analýza energetických toků pro danou motorovou aplikaci. Přístup prezentovaný v práci zahrnuje termodynamický model motoru v programu GT-SUITE ve kterém jsou zkoumány možnosti energetických toků při změně velikost turbínového a kompresorového kola turbodmychadla. Přistup je aplikován na turbodmychadlo s variabní geometrií lopatek s přidruženým motor generátorem pro donáškové vozidlo, kde je možné při různých zatíženích motoru rekuperovat energii z turbodmychadla. Zároveň byli zjištěny možnosti snížení spotřeby paliva v určitých provozních bodech motoru.
|
|
|
Cranktrain with High Mechanical Efficiency
Krajči, Jakub ; Raffai, Peter (referee) ; Novotný, Pavel (advisor)
This master's thesis is concerned with the mechanical efficiency of cranktrain contact pairs in a combustion engine. In the introductory part, the fundamental terminology relating to the cranktrain is presented along with the specification of the areas of mechanical losses, greasing modes and types of wear. The following chapters describe the possibilities of eliminating mechanical losses of the cranktrain and the calculation methods that can be utilized to mathematically solve mechanical losses. The practical part includes the proposal of a calculation model and its use in the analysis of the cranktrain of Skoda 1.2 HTP engine. The last part of this thesis comprises modified alternatives of the standard cranktrain focusing on the elimination of mechanical losses. The evaluation of the results is presented in the conclusion of this thesis.
|
|
|
Silicone damper of a six-cylinder in-line diesel engine
Drozdek, Lukáš ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
This thesis "Silicone damper of a six-cylinder in-line diesel engine " is focused on the proposal of alternative using of silicone damper for the a six-cylinder in-line diesel engine, which is made for tractors and other industrial aplications. The aim of this thesis is to count the oscilation of crankshaft by the help of appropriate dynamic model, then to propose such a basic parameters of silicone damper, which absorbes torsion blip crankshaft to acceptable value. The next part of my thesis is proposal of the constructive implementation of fixation the silicone damper on the free part of crankshaft. The last part of my thesis is comparing and evaluating the oscilation of crankshaft without a dumper and with a new propsal of the silicone damper.
|
|
|
Vibration Propagation Analysis of Coupled Structure Acoustic Space
Kostelník, Jan ; Pellant, Karel (referee) ; Novotný, Pavel (advisor)
The aim of this Master’s thesis Vibration Propagation Analysis of Coupled Structure Acoustic Space is to analyze vibration propagation in combustion engine, from combustion space through solid structure to fluid surroundings. Then analyze the noise increase as pressure changing in fluid space around the solid structure. There was made a analyze of single piston engine in different frequency and piston location. A simulation of distribution of a pressure waves was made in an ANSYS application.
|
guest ::
RSS feed.