|
|
Description of Crack Propagation in the Fields of Strongly Non-Homogeneous and Residual Stresses
Štegnerová, Kateřina ; Materna, Aleš (referee) ; Malíková, Lucie (referee) ; Náhlík, Luboš (advisor)
This Ph.D. thesis was written under the supervision of Assoc. Prof. Luboš Náhlík, Ph.D. and Assoc. Prof. Pavel Hutař, Ph.D. Thesis is focused mainly on application of generalized linear elastic fracture mechanics, which allows description of crack behaviour propagating from general singular stress concentrators, such as material interfaces or sharp V-notches, and verification of validity of used fracture criteria. The obtained results were used in the next part of the thesis, which deals with the issue of crack propagating in ceramic composites, where the stress distribution field is strongly influenced by the existence of material interface and presence of residual stresses, that arise during manufacturing process of composite.
|
|
|
MULTI-PARAMETER MTS AND SED CRITERION APPLIED ON A CRACK IN AN ALKALI-ACTIVATED CONCRETE SPECIMEN UNDER MIXED-MODE LOADING
Malíková, Lucie ; Miarka, Petr ; Simonová, H.
The paper is devoted to an analysis of a crack propagation in a semi-circular concrete specimen under three-point bending. I+II mixed-mode loading is ensured via an inclined crack. Crack deflection angle is investigated by means of the generalized/multi-parameter form of the Maximum Tangential Stress (MTS) criterion and Strain Energy Density (SED) criterion as well as experimentally. The multi-parameter fracture mechanics concept applied in this work is based on the approximation of the crack-tip stress field by means of the Williams series expansion (WE). It has been proved that this approach can help to describe crack behavior in some kinds of materials better than the classical (one-parameter: stress intensity factor) fracture mechanics. This conclusion is discussed also in this paper.
|
|
|
Analysis of fatigue damage accumulation of test specimens made from S690 and S960
Al Khazali, Mohammad ; Malíková, Lucie (referee) ; Seitl, Stanislav (advisor)
This thesis study and examines the behavior of high strength steels (HSS) during fatigue utilizing S-N curves of models based on the Palmgren-Miner Rule and some invented hypotheses, such as Haibach's model, Corten-Dolan's model and Serensen-Kogajev model. Firstly, a detailed mechanical testing will be done and discussed to ensure creating a proper understanding of the two types of steel that will be the focal point of the research. The curves created are interpolated using measured data form cyclically loaded of the steel to create the relation between the number of cycles the material can withstand before reaching failure state and the level of stress applied on a variety of specimens with different homogenizes but similar characteristics. The accuracy of each model is determined for each grade of steel, the S690 and the S960. Then we will conclude by the end of the work which can be considered suitable and which not of each model and an explanation of the reasoning behind the results achieved to ensure better outcome in future related work.
|
|
|
Analysis of crack behaviour under mixed-mode loading
Antalík, Adam ; Miarka, Petr (referee) ; Malíková, Lucie (advisor)
This bachelor’s thesis deals with the analysis of the stress field in the vicinity of the crack tip, described by the stress intensity factor K. The objective of this thesis is to calculate values of the parameter K for a crack in a rectangular specimen subjected to asymmetric four-point bending. Thus, mixed mode I + II loading conditions occur. The first part of the thesis deals with the fracture mechanics concept. In the second part, a cracked specimen is modelled in the Ansys Mechanical APDL software. In the final part, the resulting values of the parameter K, obtained from the commands KCALC, CINT and two empirical equations, are presented. The MTS criterion is applied for estimation of the crack propagation angel and all results are discussed thoroughly.
|
|
|
Analysis of stress field in the vicinity of fatigue crack in IPE made from stainless steel
Juhászová, Tereza ; Malíková, Lucie (referee) ; Seitl, Stanislav (advisor)
The master thesis is focused on analysis of stress field in the vicinity of stress concentration of stainless steel IPE beam loaded in tree point bending. Theoretical part includes introduction to fracture mechanics with basic terms, principles and variables used to describe fatigue behaviour of material. It concludes teoretical grounds of fracture tests which are future focus of the thesis, methodes used by numerical softwares and methodes used to obtain numerical results. Practical part includes comparision between two and three dimensional numerical models in three point bending, IPE model with different crack front shapes and plastic zone size. Numerical modelling was processed in Ansys Mechanical APDL. Thesis also involves results of experimental testing evaluated using numerical model.
|
|
|
The Influence of Specimen Thickness on Crack Initiation in the Tip of General Singular Stress Concentrator
Kopp, Dalibor ; Řoutil,, Ladislav (referee) ; Malíková, Lucie (referee) ; Klusák, Jan (advisor)
Geometrical discontinuities, like sharp notches, appear in constructions and engineering structures and lead to stress concentrations. These technical objects are very dangerous due to the fact that they reduce the structural conformity and can lead to crack initiation. Technical objects are not always designed as homogenous bodies but can consist of two or more materials with sharp notches on the interface of these materials. The influence of free surface on crack initiation conditions is studied and assessed by means of 3D model of sharp and bi-material notches with finite thickness. Stress fields around the singular stress concentrators are calculated with finite element method and the results are evaluated by means of criterion of critical quantity. This approach is easy applicable and can be used in combination with the knowledge of basic material properties and results of finite element analysis of the assessed notches. In order to estimate weather crack will initiate from the middle of the observed notched specimen or from its free surface, the value of averaged critical applied stress was introduced. With this value it’s possible to determine the location of crack initiation thru the sample thickness. Thru the ratio of values of critical applied stress in the middle and on the free surface of the observed specimen it’s possible to quantify the influence of the free surface on the location of crack initiation. With the use of this approach it’s shown, that the location of crack initiation depends on more parameters, loading direction, the notch opening angle and the sample thickness. In case of bi-material notches it depends also on the ratio of young modulus.
|
|
|
Numerical support for wedge splitting test on non-traditional geometry
Juhászová, Tereza ; Malíková, Lucie (referee) ; Seitl, Stanislav (advisor)
Bachelor thesis is focused on numerical support of wedge splitting test with non-traditional geometry. Numerical analysis takes place in program Ansys, defining behavior of models with modified entry parameters. Attention is focused on values of parameters characteristic for fracture mechanics; stress intensity factor and T-stress and functions describing their relationship to length of crack, evaluation of which is graphically illustrated.
|
|
|
Description of Crack Propagation in the Fields of Strongly Non-Homogeneous and Residual Stresses
Štegnerová, Kateřina ; Materna, Aleš (referee) ; Malíková, Lucie (referee) ; Náhlík, Luboš (advisor)
This Ph.D. thesis was written under the supervision of Assoc. Prof. Luboš Náhlík, Ph.D. and Assoc. Prof. Pavel Hutař, Ph.D. Thesis is focused mainly on application of generalized linear elastic fracture mechanics, which allows description of crack behaviour propagating from general singular stress concentrators, such as material interfaces or sharp V-notches, and verification of validity of used fracture criteria. The obtained results were used in the next part of the thesis, which deals with the issue of crack propagating in ceramic composites, where the stress distribution field is strongly influenced by the existence of material interface and presence of residual stresses, that arise during manufacturing process of composite.
|
|
|
Influence of Residual Stress on Lifetime Prediction of Polymer Pipelines
Poduška, Jan ; Nezbedová, Eva (referee) ; Malíková, Lucie (referee) ; Hutař, Pavel (advisor)
The lifetime of plastic pipes for water supply and other applications is demanded to exceed at least 50 years. Such a long lifetime is difficult to prove by standard testing methods like the hydrostatic pres-sure test. However, it is possible to calculate an estimation of the lifetime, as the most frequently oc-curring mechanism of failure of plastic pipes is the creep crack propagation and subsequent failure. The method is based on describing the crack propagation by parameters of the linear-elastic fracture mechanics. An important part of this method is a finite element simulation of crack propagation in a pipe loaded by various types of loads. Residual stress, a side product of solidification after extrusion, is one of these loads. This thesis begins with an introductory part and literature review of the relevant topics – most of all the typical material properties of the pipe materials, mechanisms of failure, methods of residual stress determination suitable for plastic pipes and their results, methods of testing the materials and calculating lifetime. After the introduction, the problems to be solved are defined. The description of the residual stress state in the wall of various plastic pipes is the main topic. Both tangential (hoop) and axial residual stress in pipes of different dimensions and materials are determined using a combination of experiments and numerical simulations. Also, a simplified method of tangential residual stress is designed that can provide a sufficiently precise description of the tangential resid-ual stress state and is not difficult to carry out. A method to include the residual stress in the lifetime calculations and its influence on the lifetime is also dealt with. Apart from residual stress, the influence of soil loads in case of a buried pipe is studied. The residual stress can also influence the experimental determination of crack growth rate. If the CRB (cracked round bar) test is used to measure the crack growth rate, the crack can propagate asymmetrically due to the presence of residual stress in the specimens, which affects the results. Based on a finite element simulation of crack propagation in a CRB specimen, the severity of the influence is assessed.
|
|
|
Fracture tests of selected specimens with special aggregates: experiments and numerical simulation
Majda, Tomáš ; Malíková, Lucie (referee) ; Keršner, Zbyněk (advisor)
The diploma thesis deals with selected fracture tests and evaluation of fracture parameters of cement-based composite. One part of the thesis deals with cement-based composite with glass spherical aggregate of a single fraction of 2 mm. After production, the beams with dimensions of 20×40×200mm exposed to temperatures in the range from 100 to 1000 °C for one hour. Using the non-destructive ultrasonic pulse method, the degree of damage caused by termal load was determined. Selected specimen with central edge notch were then tested in three-point bending and fragments after these tests were tested in compression. In the second part, attention was paid to the evaluation of fracture tests conducted on specimen from drill-cores taken from selected objects located at the former Transgas Gas Control Center in Prague. The specimen were provided with a chevron notch before being tested in three-point bending. The measured data was modified by the GTDiPS program and in the case of the glass composite the StiCrack program was used to evaluate fracture parameters.
|
guest ::
RSS feed.