National Repository of Grey Literature 106 records found  beginprevious89 - 98next  jump to record: Search took 0.00 seconds. 
Optimizing design of electric machines using genetic algorithms
Jelének, Marek ; Mach, Martin (referee) ; Janda, Marcel (advisor)
This bachelor thesis deals with optimization methods usable in the construction of electrical machines. The main aim of this thesis is propose an optimization method, applied to simple example and evaluate optimized results with not optimized results.
Power supply in an automobile
Soukup, Patrik ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This work deals with the study of automotive alternators and their theoretical analysis. We can find there a listing of losses arising from the alternator, explanation of their formation and also the way of their reduction. Losses reduction is one of the aspects of innovation leading to increase in overall efficiency of the automotive alternator. Therefore a design of particular ways of innovation is made in this work and subsequently the design is verificated using Maxwell - RMxprt.
Direct connection of permanent magnet synchronous generator to grid
Chrobák, Petr ; Mach, Martin (referee) ; Ondrůšek, Čestmír (advisor)
This thesis deals with possibility of direct grid connection of permanent magnet synchronous generator. Main benefits of PMSG are briefly compared with classical synchronous generators. There are mentioned all synchronization conditions and their modification in the case of directly grid connected PM generators. One part of this thesis is focused on the damper winding and transient currents shapes during transient state. There is also solved the effect of damper winding on currents shapes. To simulate the case of direct PMSG grid connection there is composed alternative mathematical model of PMSG. Final part of thesis is focused on the simulation of PMSG and there is also made the simulation of PMSG direct grid connection.
Fuel Injection Analysis
Schnabl, Jan ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The ignition and injection system in any form are an integral part of each car. The development of these systems goes hand in hand with the development of the automobile and his growing industry. Since the nineteenth century to the present occurred in this sector signifcant progress. This thesis is focused primarily on the description of the two systems and their partiton. The development has been recorded from the oldest systems to the newest systems.
Losses Analysis of Induction Machines with Small Output Power
Mach, Martin ; Záskalický, Pavel (referee) ; Voženílek, Petr (referee) ; Hájek, Vítězslav (advisor)
The main objects of this doctoral thesis are analysis of a small induction motor losses and research of ways how to reduce losses and increase efficiency of this motor. The ways how to reduce losses and increase efficiency under study are as follow: reduction of stator winding’s resistance, lengthening of magnetic circuit, modification of turn number, cooper squirrel cage, slots shape optimization, sheets annealing and use of sheets with lower specific losses. The losses analysis and the research of ways how to reduce losses are done due to laboratory work. For this laboratory work, eleven different samples of the motor with above mentioned modifications were manufactured. Results of their measurements and losses analysis are presented in this thesis. There were also simulations by finite elements method used to help solve objects of this thesis. Due to the simulations, analysis of loses of the induction motor under study was done. Results of this analysis include some details that are not included in the results from measurement, for example separation of core losses between rotor and stator. The simulations were also used for analysis of manufacturing technology impact onto the motor’s performance. During this analysis, following impacts were considered: actual shape of magnetic circuit, stator’s sheets riveting, influence of cutting onto material’s properties and placement of the stator into conductive frame. Results of this analysis are presented in this thesis.
Starting Battery
Mach, Martin ; Huzlík, Rostislav (referee) ; Hájek, Vítězslav (advisor)
This bachelor’s thesis describes construction and functioning of starting battery. This thesis is separated to parts as electrochemical current source, possibilities of sorting and characterization of accumulators which are used as starting battery. One part is about constructions of starting battery which are available and description of electrical parameters. Next part includes correct functioning and service. Last part of this thesis describes a project of laboratory exercise containing a measurement on starting battery.
Losses of capacitor run induction motor
Štaffa, Jiří ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
This project deals with increasing efficiency of one phase induction motor with permanent split capacitor. We can whole thesis divide into two parts, the first one is basic and the second is interested in analysis and measurement. First part handles with construction of single phase induction motor, explanation of function principle, start and run of motor. Calculating of efficiency including type of losses, which reduce efficiency. Second part concerns analysis losses including moment load characteristic, motor measurement while rotor is locked, with no load operation, measuring mechanical and additional losses. Further there will be measured useful values for creation model for simulation (reactance of windings etc.). Than will be the model created in ANSYS Maxwell with module RMxprt. After analytic calculation in RMxprt and using Finite Element Method (FEM) load characteristics will be compared together. This comparison gives us information about accuracy of model for simulation. Simulation and measurement will be carried out on another engine with high quality ferromagnetic material used for magnetic circuit of motor. Further will be done simulation of motor with modifications shown in previous chapter for high efficiency.
Reluctance machine with permanent magnet on rotor
Kubín, Tomáš ; Mach, Martin (referee) ; Ondrůšek, Čestmír (advisor)
This master’s thesis is focuses on the reluctance motor, especially on the design of the rotor. It shows the development of the construction of rotors of reluctance motors. Furthermore, it shows the principle of reluctance machine and its basic mathematical description and the principle of improving the machine parameters by inserting permanent magnets into the rotor. It offers an overview of patents available from 2000 to present. Also it deals with the design of the rotor with permanent magnets for stator of induction motor.
Analysis of possibilities to improvement induction motors efficiency
Novotný, Jiří ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
In the first part of the master’s thesis dealing with the increasing efficiency of induction motors there are briefly presented basic information about induction motors, followed by an overview of the losses of induction motors. The next part deals with the ways to increase efficiency of induction motors without increasing tooling costs. The practical part consists of four measurements of four induction motors, with their various mechanical adjustments to make comparing benefits of these modifications possible. The measured results are compared by a finite element method in Maxwell 2D Design program, in which the same motors are simulated as measured. Theoretical knowledge about the increase of efficiency is practically applied while being implemented in the simulations.
Single-Phase Induction Motor Calculation
Kostov, Jiří ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
Diploma Thespis is focused on development, parameters and construction of one-phase induction motor underplayed by calculations. Emphasis was dealt to simplify motor development process by developed computer program. Program calculations were approved by parallel by hand calculations and by experimental measuring of real processed motor.

National Repository of Grey Literature : 106 records found   beginprevious89 - 98next  jump to record:
See also: similar author names
1 MACH, Marek
5 MACH, Michal
4 MACH, Milan
2 Mach, M.
1 Mach, Matěj
5 Mach, Michal
4 Mach, Milan
Interested in being notified about new results for this query?
Subscribe to the RSS feed.