|
|
Static load test and the assessment ceiling of reinforced concrete structure built in the 1st half of 20th century
Málek, Jaroslav ; Láník, Jaromír (referee) ; Žítt, Petr (advisor)
This master thesis deals with static load test and static assessment of selected segments of reinforced concrete ceiling construction of the Hennebique system at the Faculty of Arts at Masaryk University in Brno. This thesis contains: the execution of the static load test, the data evaluation of the static load test and the data evaluation of the complementary laboratory testing, geometric orientation of bearing elements, the checking of the ceiling placement in the peripheral position, and the diagnosis of the reinforcing of the construction. This thesis also includes the static assessment according to various standard norm rules and the numerical analysis in ATENA software program.
|
|
|
Microstructure and mechanical properties of lightweight structural AZ31 alloy prepared by twin-roll casting method.
Zimina, Mariia ; Cieslar, Miroslav (advisor) ; Málek, Jaroslav (referee) ; Novák, Pavel (referee)
Title: Microstructure and mechanical properties of lightweight structural AZ31 alloy prepared by twin-roll casting method Author: Mariia Zimina Abstract: Microstructure of AZ31 twin-roll cast magnesium alloy was studied using light optical, electron and atomic force microscopy. The effect of annealing temperature on the microstructure was tested. Mechanical properties of a thin magnesium strip were investigated by means of microhardness tests and tensile tests at a relatively low strain rate 10-3 s-1 . Results show that the ductility of the twin roll cast strip increases with increasing deformation temperature, however, a remarkable decrease was observed at about 200 řC. This effect appears also in a conventionally cast ingot of a master alloy and is caused by a change of a deformation mode occurring at this temperature. Moreover, the effect of severe plastic deformation on the microstructure and mechanical properties was studied. Equal channel angular pressing was applied on magnesium strip samples and lead to a significant grain refinement accompanied by an unfavorable strengthening of the initial basal texture, which is effectively suppressed by a subsequent annealing. A constrained groove pressing was for the first time successfully applied on AZ31 twin-roll cast strip leading to an increase of...
|
|
|
Static load test and the assessment ceiling of reinforced concrete structure built in the 1st half of 20th century
Málek, Jaroslav ; Láník, Jaromír (referee) ; Žítt, Petr (advisor)
This master thesis deals with static load test and static assessment of selected segments of reinforced concrete ceiling construction of the Hennebique system at the Faculty of Arts at Masaryk University in Brno. This thesis contains: the execution of the static load test, the data evaluation of the static load test and the data evaluation of the complementary laboratory testing, geometric orientation of bearing elements, the checking of the ceiling placement in the peripheral position, and the diagnosis of the reinforcing of the construction. This thesis also includes the static assessment according to various standard norm rules and the numerical analysis in ATENA software program.
|
guest ::
RSS feed.