|
|
Detached house on a slope
Madejewský, Radek ; Kvapilová, Vendula (referee) ; Utíkalová, Ivana (advisor)
The goal of the Bachelor thesis is the elaboration of project documentation of the design of a family house located on higly sloped land in village Lubná. Object is designed as detached house. Object has one above and one underground floor. Construction system of the building is brick. Bearing walls are in contact with the terrain and made of the permanent formwork together based on foundation pads and strips. The ceiling are monoliths of reinforced concrete. The building's roof is a countertop with sheet metal roofing. The supporting structure of the roof consists of wooden trusses. The object is insulated by contact thermal insulating system ETICS. There are garage for two cars, entrance to the object, office and private zone on above the ground floor. The priate zone is consisting of two rooms, bedroom and bathroom. Together with the office, the chill zone is connected to the terrace. In the basement, there are living room with kitchenette, gym with bathroom, utility room and restroom. The living room and gym are functionally connected to outdoor terraces.
|
|
|
Detached house with design office
Maryšková, Eva ; Kvapilová, Vendula (referee) ; Utíkalová, Ivana (advisor)
This bachelor´s thesis describes the desgine of detached house with design room in Bohumín. It is a building with partial basement and with two above-ground floors. The land is almost flat and is located in built-up area of the village. House is designed for four member family. The building is designed of strustural systém of ceramic block Porotherm and the ceilings are from monolithic. The roof above the first floor is designed as a flat vegetation roof and above the second floor is designed as a flat roof. The project was designed according to the required standards and includes project documentation for the construction.
|
|
|
House on a slope
Jakoš, Milan ; Kvapilová, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for building a house on a slope. It is an object with one basement and two above-ground floors. The family house is one apartment unit for a family of four. Vertical structures are made of Ytong. The peripheral basement wall adjacent to the soil is made of reinforced concrete. Ceiling structures are reinforced concrete. The roof is sloping double-skin with a slope of 30 °. The supporting structure of the sloping roof is formed by the Ytong system. The house is based on reinforced concrete strip foundations. The drawing part was processed in Allplan.
|
|
|
Apartment building
Malina, Tomáš ; Kvapilová, Vendula (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis deals with the elaboration of project documentation of the construction of the Apartment building in the Kroměříž. The object has an atypical shape composed of two squares. Apartment building is designed for 32 people. The building is designed as a four-storey and house with a cellar. On the underground floor there are storage areas, technical backgrounds and free times activities. On the first floor is a main entrance and two flats, on the second to four flor are just flats. The building is bricked from brick block with filigree floor slab and with a flat roof.
|
|
|
Mixed-use building “Lipa”
Benková, Erika ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
The subject of bachelor thesis is new building of mixed-use building Lipa in the cadastral area Židenice, part of Brno city in a row of residential buildings. The property is located in a sloping terrain. Mixed-use building Lipa is designed with four storeys, one underground and 3 aboveground floors. There are garages with a capacity of 11 parking places, a technical room, a storeroom, two engine rooms and two lifts for cars in underground floor. On the first floor there are business premises and the background of the apartment building. From the second to third floor there are dwellings. The roof is saddle-shaped with dormer windows. Main entrances are orientated on north-east.
|
|
|
Apartment building
Kašpárová, Darina ; Kvapilová, Vendula (referee) ; Daněk, Lukáš (advisor)
The goal of this bachelor thesis is to elaborate the project documentation of a newbuilt apartment building in Partizánske. The apartment house is designed as a three-storey building with a basement. There are 9 apartments in above-ground floors and in the under-ground floor there are common premises of the house equipment. Each of apartments has a balcony, the flats located on the first floor have small gardens. The top floor is designed as a recessing floor and a terrace belongs to the apartments located on this floor. The vertical loadbearing structure is made of ceramic blocks and partly reinforced concrete, the horizontal load bearing is designed as cast-in-place reinforced concrete. The roof is designed as a one-layer flat roof. The work includes project documentation for the construction.
|
|
|
Family house D/1
Kvapilová, Vendula ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
Bachelor´s thesis includes the design and construction plan for a family house with a place of business in the town of Ostrava in the stage of project documentation for construction. The object has a rectangular ground plan, one basement, three groundfloors, attic and roof. The roof is designed as a saddle. To the building lead a pedestrian and access roads and the land is fenced. The main part of the building is intended for living, groundfloor is using for store with the purpose of the sweet-shop.
|
|
|
Reconstruction of the Knurr palace, Fulnek
Kvapilová, Vendula ; Cigánek, Jiří (referee) ; Novotný, Miloslav (advisor)
This diploma thesis deals with the reconstruction and rehabilitation of a real cultural monument in Fulnek. It is a four-winged object with almost rectangular atrium. The main subject of the diploma thesis is the change in the use of the building and the proposals for remediation of damp walls. Knurr's palace has three above-ground floors and is non-decked, covered by a classic shell with fiber cement. The use of the object is mainly designed as a civic amenities, now the building is not used. The building is located in close proximity to the slope and the building is adjacent to the building. The project is solved at the level of the documentation for construction.
|
|
|
Influence of zinc loss during the sintering on permeability/inductance of ferrite ceramics
Kvapilová, Vendula ; Ptáček, Petr (referee) ; Šoukal, František (advisor)
The diploma thesis is focused on the investigation of the effect of zinc release during ferritic sintering on the permeability/inductance of ferrite ceramics. The theoretical part deals with the position of ferrites among other ceramic materials. It describes the basic characteristics of ferrites, their crystal structure and finally the problems that are directly related to their production and which fundamentally affect the magnetic properties of ferrites. In the second part of the work, the influence of the temperature and time of sintering and the position of the cores in the furnace during firing on the loss of zinc from the sample and subsequently on the electromagnetic properties of the prepared test specimens from industrial raw material mixtures was investigated. These are initial experiments, which will be followed by further research aimed at eliminating the problem of zinc loss in the production of Mn-Zn ferrites.
|
|
| |
guest ::
RSS feed.