|
|
Documentation of Balkónová and Balkóta passages in Býčí skála cave
Velecká, Kateřina ; Kuruc, Michal (referee) ; Kratochvíl, Radim (advisor)
The bachelor thesis deals with documentation of the part of cave system Býčí skála, namely of the passages Balkónová chodba, Balkóta and part of the passage Kóta 314 in the form of a ground plan, extended longitudinal section and cross sections in the scale of 1:250. The thesis contains a short description of the locality, steps from recognition and completion of the existing measuring network to a detailed survey and creating of the final map in the JTSK coordinate system and the Bpv height system. For the detailed measurement was used a special speleological measuring method utilizing a device DistoX2 with a tablet and the program TopoDroid for creation of the measuring sketch.
|
|
| |
|
|
Accuracy of Real Time Kinematic Method in Building of Geodetic Control
Nosek, Jakub ; Kuruc, Michal (referee) ; Bárta, Ladislav (advisor)
The aim of this bachelor thesis was to evaluate the accuracy of the RTK method in the creation of point fields. The RTK-measurement was carried out near the Faculty of Civil Engineering, Technical University in Brno, and near Jedovnice, by using the CZEPOS network and the Trimble VRS Now Czech network. These two locations have made it possible to assess the effect of receivers distance to the reference stations on measurement accuracy. At each point, two continuous coordinate records were executed by the RTK method after 10 seconds during 10 minutes. The graphs were compared to the coordinate differences of the pairs of independent measurements. The results of the RTK method were tested against the reference values determined by the common equalization of the measurement results of the fast static method and the terrestrial measurements by the total station using the LSM. The bachelor thesis also includes a comparison of the results of the transfer of spatial coordinates ETRF2000 to S-JTSK using precise global transformation performed by several transformation programs.
|
|
|
Survey of boundary an Water partingof lokality Rakovecké údolí
Háva, Lukáš ; Kuruc, Michal (referee) ; Fišer, Zdeněk (advisor)
The aim of the bachelor thesis is terrain research of Rakovecky and Jedovnicky stream watershed. The thesis displays chronological process from theoretical preparations, documentation processing, reconnaissance of geodetic network in the area, terrain measurements to processing of gained data in office and drawing up of the final relief with highlighting of the watershed.
|
|
|
Mapping Survey of surroundings of the Dačice Chateau
Pittauerová, Petra ; Nosek, Jakub (referee) ; Kuruc, Michal (advisor)
This bachelor thesis deals with the creation of a thematic map of Dačice chateau surroundings. The thesis contains information about the location, the measuring instruments, the main measurement methods and the activity performed before, during and after the measurement. The final thematic map is made in scale 1:500 in the 3rd accuracy class according to ČSN 01 3410 in the coordinate system S-JTSK and the altitude system Bpv. The map shows the state of the locality at the turn of August and September 2020.
|
|
|
The Mapping Survey of the locality Vilémovice
Čermáková, Markéta ; Navrátil, Tomáš (referee) ; Kuruc, Michal (advisor)
The subject of this thesis was to make thematical map in scale 1:500 for location in Moravian Karst in Vilémovice. The main task was to measure the location so the topografy, terrain skeleton and mainly the karst formation located there would be captured. The final map will be used by CHKO of Moravian Karst. All of the required standards were used to finish the mapping as well as the table of atributes given by CHKO of Moravian Karst.
|
|
|
Creation of software support to device for absolute GNSS antenna calibration
Galata, Marek ; Kuruc, Michal (referee) ; Kratochvíl, Radim (advisor)
The diploma thesis deals with creation of software support for the robotic device used for absolute GNSS antenna calibration, which is developed by Institute of Geodesy at Faculty of Civil Engineering, Brno University of Technology. In the beginning of this thesis, there is in general discussed issue of absolute GNSS antenna calibration. Then the text continues by description of calibration device itself together with summary of testing performed so far. Next sections are focused on its main content. There is mentioned testing calibration process, followed by all of every single steps, which leads the procedure towards gaining calibration parameters for removing errors arising due to instability of antenna´s phase center position.
|
|
|
Mapping Survey of Björnson park in Brno
Trčka, Vojtěch ; Foral, Jakub (referee) ; Kuruc, Michal (advisor)
This bachelor thesis is about tacheometric measurement and creation of purpuse map in the area of Björnson park in Brno. The purpose of the map besides the usual content of the purpose map is comlemented by measurement of diameter of tree trunks, heights and widths of tree crowns. This work is divided into theoretical and practical part. Result of the work is purpose map in the the scale of 1:500 in 3. class of accuracy according to ČSN 01 3410. Map is created in the geodetic reference system S-JTSK a altitude system Bpv.
|
|
|
Development of the Control program for Total station for athletics field Events
Papež, Jakub ; Černý, Martin (referee) ; Kuruc, Michal (advisor)
In this Bachelor’s thesis is created system MERADIS, which controls a total station, measure angles and lengths and processes the measured values. The system is designed for use in measuring performance in athletic field events. In the introductory part of this work are presented athletic field events and their measurement. Next part is devoted analyzes of measurement accuracy and measurement development program. The last part briefly describes the individual components of the system MERADIS.
|
|
| |
guest ::
RSS feed.