|
|
FPGA based sound card for PC
Štraus, Pavel ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
This project deals with implementation of a first order Sigma–Delta AD converter on the FPGA. This ADC is design for an audio signal processing. ADC is build up partially from digital blocks implemented in FPGA (programmed using VHDL) and from few analog components placed external to FPGA. Output from ADC is PCM signal. Data from ADC is created UDP datagram, which is sent to PC via network connection. Income data are received in created program, which save data to text file. This text file is processing in MATLAB.
|
|
|
Nano-ammeter with galvanic isolation
Šimka, Marek ; Kubíček, Michal (referee) ; Kolka, Zdeněk (advisor)
This bachelor thesis deals with all the aspects, that are important in the designing of the nano-ammeter. In theoretical part, there are described possible ways to measure electrical current of very low values. Other parts of the thesis describe all parameters, which are influencing measurement accuracy. These are, for example, unwanted and leakage currents, but also other parasitic phenomena that may occur. Thesis explains how to minimize unwanted currents and other influences. Practical section provides more detailed description of the proposed main scheme. There are also described components, that have been selected as the main parts of the nano-ammeter circuit. Subsequent part contains analysis of printed circuit board including all layers. Furthermore, the thesis deals with the realization of equipment and possible errors. The results of the bachelor are summarized in the last chapter.
|
|
|
Development of high resolution RGB camera
Madeja, Jiří ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
Tato práce se zabývá výběrem vhodného obrazového snímače pro použití v kameře snímající rostliny ve vysokém rozlišení a návrhem vhodného obvodu pro propojení vybraného snímače (SONY IMX253) s vývojovou deskou Avnet MicroZed. Tato práce pojednává o jednotlivých parametrech obrazových snímačů podle kterých je vybírán vhodný obrazový snímač. Je vysvětlen proces výběru vhodného obrazového snímače a podrobněji popsány parametry vybraného snímače. Je naznačena problematika návrhu elektroniky a plošných spojů z hlediska požadavků vysokorychlostních obvodů a citlivých a specifických součástek jako je obrazový snímač. Je nastíněna konfigurace a programování obvodu Xilinx Zynq a nakonec je provedeno zjednodušené teoretické ověření funkčnosti navrženého modulu.
|
|
|
Control system for remote laser-induced breakdown spectroscopy
Petrilak, Michal ; Fuchs, Michal (referee) ; Kubíček, Michal (advisor)
The work deals with the design of the control electronics for measuring set-up for elemental composition analysis using remote LIBS techniques. The electronics is designed in modular way for light interchangeability and variability. It consists of several separate plug-ins; each plug-in solves its part of the problem and communicates with others over the I2C bus. The work describes the basic components and concepts; a special care is taken to describe the modules for stepper motors control and for communication with focusing lens from Canon company.
|
|
|
Solar charger with embedded accumulator
Háněl, Petr ; Dušek, Martin (referee) ; Kubíček, Michal (advisor)
The mobile devices are under rapid development today and thereby they put still more challenging requirements on charging technologies. The thesis deals with design and development of an off-line charger device for travel use. It is based on an accumulator that is being charged continuously using a solar cell. Alternatively the accumulator can be charged using a standard USB port. One of the key requirements on the device was simplicity of its circuitry in order to make the device cheaper and more reliable. The device is able to supply any mobile device that is using a standard USB port.
|
|
|
Multichannel HD-SDI digital video signal converter
Kučera, Stanislav ; Bobula, Marek (referee) ; Kubíček, Michal (advisor)
This master’s thesis deals with the design of six channel SD, HD and 3G HD-SDI digital video signal converter to 10-Gigabit Ethernet. In the introductory part, the conception of designed device is formulated. The theoretical background is provided in four chapters, where main standards and design rules related to digital electronics’ design are analyzed. The emphasis is placed on signal integrity at high-speed interconnects. There mostly practical examples, calculations and simulations are utilized. The design part contains thorough description of main subsystems’ design, implementation of FPGA, SDI input channels and 10-Gigabit Ethernet PHY. In the final part, the first tests and measurements of the build prototype are summarized. As an example, the comparison of signal integrity simulation to measurement is provided.
|
|
|
Digitally controlled power supply
Madron, Martin ; Šotner, Roman (referee) ; Kubíček, Michal (advisor)
This bachelor´s thesis is about design of digitally controlled power supply. The introduction describes the basic principle of power supplies and their division. The thesis deals with solving the adjustable current source with adjustable current cutout. The solution of supply was made using linear stabilizers L200 controlled by digital potentiometers. Control handles microcontroller ATmega16 from Atmel. The user interface is realized by the matrix keyboard and LCD display. At the conclusion of the work there is a selection of the structural components.
|
|
| |
|
|
Advanced waterproof flashlight for extreme condition
Šerík, Martin ; Kubíček, Michal (referee) ; Kincl, Zdeněk (advisor)
The work is focusing on the search for available solutions concerning the choice of components for advanced waterproof flashlight for extreme conditions and on building this device. After comparing the individual parameters the following components were selected: as a source of energy - four AAA batteries eneloop distributed by Sanyo, high-brightness LED CREE XP-G and microcontroller ATtiny24 distributed by Atmel. The user interaction is realized by support of capacitive touch buttons and the charging of the lighting device is wireless. The light is placed on the handlebar using a specialized holder.
|
|
|
FPGA-based pulse classification
Ihnát, Kryštof ; Matěj, Zdeněk (referee) ; Kubíček, Michal (advisor)
Cílem této práce je seznámení se s problematikou detekce ionizujícího záření a jeho detekcí zejména pomocí proporcionálních detektorů a navrhnutí algoritmu pro jejich klasifikaci a jeho následná implementace do FPGA. V první části práce je obecně popsáno, jak jednotlivé typy plynem plněných detektorů fungují. V druhé části je věnován prostor algoritmům pro klasifikaci pulzů, které se objevují v literatuře. Následuje návrh vlastního algoritmu, jeho rozbor a rozebrání výsledků. Ve třetí části následuje popis samotné realizace navrhnutého řešení na platformě RedPitaya. Je zde rozebrána celková architektura navrhnutého systému, detailně popsány jak jednotlivé bloky v logice FPGA, tak i ostatní skripty zajišťující zpracování naměřených výsledků a jejich vizualizaci.
|
guest ::
RSS feed.