|
|
Polyfunctional building
Pavlík, Vojtěch ; Kučera, Radim (referee) ; Fuciman, Ondřej (advisor)
Diploma thesis deals with a new polyfunctional building with in the town Třebíč. The aim of this work is to develop design documents for building construction. It is detached building with five above-ground floors and one basement. Spaces that are used to operate on the first floor and second floor are operationally separated. Three floors are intended for occupancy 30 – 40 persons.
|
|
|
Detached house
Macháčková, Klára ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
This bachelor thesis deals with the design of a family house in Olešnice. The family house is designed as a two-storey, partially basement building, roofed by flat roof. The project was created for the purpose of designing a permanent home for a 5 persons in two housing units with the possibility of two garage parking spaces. The entrance of the house is oriented the south-eastern side to the staircase, where you can enter the basement, apartment in 1.NP or apartment in 2.NP. After entering the apartment in 1.NP the person is located in vestibule from which you will get into the kitchen with a living room, room, bedroom, bathroom, toilet, dressing room or storage room. The apartment in 2.NP is living room, bedroom, kitchen with living room, two bedrooms, bathroom, toilet, cloakroom and balcony. In basement are three storage areas, a workshop and a technical room. Social and private zones are oriented mostly on the southwest side. The perimeter structures are in the basement from lost formwork BEST which is insulated with extruded polystyrene. The rest of the vertical structures are made of ceramic blocks Porotherm. The ceiling structure is solved by the Porotherm system. Part of the proposal is thermal engineering assessment, fire safety solutions and assessment in terms of acoustics and daylight. The thesis contains a drawings and technical documentation and it is composed as an implementation project.
|
|
|
Home over water
Kosová, Karolína ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
The subject of my bachelor thesis is a project of a new detached house with painting atelier in Martinice u Onšova. The designed house will be partly built partly on plot no. 140/2, the main part of the building is designed above the surface of the large pond (plot no. 145) Detached house for a four-member family has two overground floors. Parking is solved by a detached garage for two cars. Foundations are made up of reinforced concrete large diameter drilled pile and frame structure of strip foundation which supports loadbearing wall. Vertical loadbearing structures are designed of clay blocks. The vertical peripheral structures are provided with an insulation system with ventilated space. Floor-slab is designed of reinforced concrete. A two-layer barrel roof is a dominant of the building. A roof between detached house and atelier is designed as a walkable flat roof.
|
|
|
STREAMLINING OF THE PACKAGING PROCESS AT ASSEMBLY SITES
Kučera, Roman ; Jozefovič, Peter (referee) ; Videcká, Zdeňka (advisor)
The thesis deals with finding a way to streamline the process of packaging stabilizers at assembly workplaces in order to increase its productivity. The analysis of the current state in which the process is in is carried out using lean manufacturing methods. On the basis of this analysis, and after its evaluation, a proposal is made to make the process leaner and thus increase its productivity.
|
|
|
Apartment building
Světlík, Adam ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
The subject of bachelor thesis is the composition of project documentation of an apartment building at edge of city Bučovice. Apartment building is four-storey building without a basement and is detached building on almost flat terrain, consisting of several parcels, on the cadastral unit of Bučovice. The object is connected to the local road on the north side of the property. Between the object and the communication is parking for the user object, which has 17 parking spaces. The ground floor is divided into the dwelling unit and the technical facilities. Other storeys are divided into the two dwelling units and these units have balconies. The walls are composed of aerated concrete blocks YTONG, in combination with an acoustic internal sand-lime blocks and are based on concrete foundation strips. The celling is reinforced light-weight clay concrete LIASTROP. The floors are heavy floating. The roof is green warm flat roof. The whole object is insulated with contact thermal instulation from mineral isolation MULTIPOR and expanded polystyrene. The drawing part was drawn in AutoCAD.
|
|
|
Apartment building
Duben, Tomáš ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
The main topic of this bachelor thesis is design of a new apartment building in Havlíčkův Brod. It is designed as a two-floor building with partial basement. The apartment building contains four separate apartments each of which is meant for a four member family. There is a partly walkable vegetation roof and the construction of the second floor above the first floor. Access to the walkable roof from the apartments in the second floor is available. The vertical supporting structures are ceramic Porotherm system and shuttering system filled with concrete C20/25 and reinforcement steel B500B. Ceiling structures are made from prestressed floor panels Spiroll. The outside parking is included on the building plot. Both the designs and visualization were elaborated in the ArchiCad software. The designs meet the valid standards and regulations.
|
|
|
Proposal for Organizational Culture Change at COOP in Albrechtice nad Orlici
Servus, Jiří ; Mgr.Robert Kučera (referee) ; Konečná, Zdeňka (advisor)
This thesis is focused on improving the organizational culture in the COOP Albrechtice Orlici. The current organizational culture is established on basis of own observation and consultation with the Head shop. Proposals to change the organizational structures emerge from the survey when they were surveyed customers' views and attitudes to the selected store. Based on this survey will be designed to improve to meet the requirements of all customers.
|
|
|
Production of universal opener by fineblanking technology
Kučera, Radek ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The aim of the thesis is to design a manufacturing technology of a part of the universal opener with an innovated design. The component is made of stainless steel 17 240 (X5CrNi18-10). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size (200 000 pieces) and to the required quality of the component the fineblanking technology has been selected. For the manufacturing of the component a triple action hydraulic press HFA 3200plus has been chosen. This press will be coupled in production line with a feeding line FBA 8/300. The main point of the thesis is to design a cutting tool and to create a drawing documentation. Another part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
Timber House
Kučera, Radim ; Vojta, Martin (referee) ; Šuhajda, Karel (advisor)
The aim of this bachelor’s work is design of new building of separate detached house. It is a timber house with a basement on the part of the ground plan, one ground floor and a flat sodded roof. The supporting part of walls creates column sandwich structure. The sheating is designed as a ventilated timber facade. The house is suitable for four-member family, with one person with limited mobility. The house is situated in Vřesina, site n. 778/55, cadastral unit Hlučín. The subject of seminar paper is “Vegetative facades”, and it is a separate supplement of bachelor’s thesis.
|
|
|
Detached House
Tonini, Ondřej ; Kučera, Radim (referee) ; Smolka, Radim (advisor)
This bachelor´s thesis deals with the project documentation of a detached house with workshop, designed for a family of four. The house is situated in the region South Bohemia in the village Trnovany cadastral district Trnovany u Litoměřic. The building is designed as a brick building. Vertical structures are designed from the structural system PORFIX. Horizontal structures are designed from the structural system PORFIX. The house is covered with gabled roof, systems hambálek. The building has two floors.
|
guest ::
RSS feed.