|
| |
|
|
Design of various ways of carrying out the ceiling construction of a family house
Klust, Vojtěch ; Šulák, Pavel (referee) ; Kostiha, Vojtěch (advisor)
Bachelor´s thesis deals with the design of floor structure of detached house made in three variants. In the first variant floor structure is made by reinforced concrete two way slab. In the second variant floor structure is made by prefabricate prestressed concrete floor slab SPIROLL. The third variant is filigree floor slab which are then concreted. The thesis includes a structural design as well as drawings, All calculations were performed in accordance with applicable standard.
|
|
|
Reinforced concrete flat slab with column head
Herold, Jakub ; Kostiha, Vojtěch (referee) ; Požár, Michal (advisor)
The theme of bachelor´s thesis is a concerns is static design of locally supported monolithic reinforced concrete slab with column head of underground garages at the lowest floor of the shopping center and static design of a typical column on the same floor. The design of the ceiling slab is done using software SCIA Engineer and the check is done by manual calculation using the method of cumulative moments. Column design was done by manual calculation. The design was followed according to the valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of the work is static design of the ceiling and renforced column and drawing documentation.
|
|
|
Structural Design of Reinforced Concrete Hall
Skotnica, Tomáš ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
This master’s thesis deals with desing and structural assessment report reinforced concrete hall in two variants. Specifically, it is variant from prefabricaed element and second variant is cast-in-place frame. The selected elements for the design are saddle grider, longitudinal bracingy, beam, column and all cast-in-place structure. The results thesis are structure assessment report of selected elements, formwork and reinforcement drawing. The structeres models were created with software Dlubal R-Fem 6 and Idea StatiCa Detail 23.0.
|
|
|
Design and Assessment of Selected RC Elements of a Family House
Novotný, Tomáš ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis deals with the design of load carrying reinforced concrete structures in a family house. Particulary, it concerns the floor slab above the basement, the internal beam P4, the external beam P6 above the garage door and the staircase within one floor. With help of Dlubal RFEM 5.24, a model was created and the internal forces were determined. As a result of the work, shape and reinforcement drawings were performed in ArchiCAD 20 and the static calculation.
|
|
|
Precast concrete structure of production hall
Hradský, Richard ; Kostiha, Vojtěch (referee) ; Girgle, František (advisor)
The main part is design and calculation of the transversal frame of industrial building consisting of those parts (girder, column, foundation pad). Computational software SCIA ENGINEER is used for design, calculation and drawing of those forces, moments and stress of elements. The verify of the results and their accuracy is applied handdone static calculation of forces, moments and stress. The drawings of those elemenst will be producted by Computational and drawing software ArchiCAD.
|
|
|
Tribune of football stadium
Weber, Jozef ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The aim of the diploma thesis was to design the precast reinforced concrete prefabricated structures of the football tribune. It was modernized sports center in Brno. According to the investor was determined the shape of the football tribune. It was compiled the design documentation. For the calculation of inner strengths was used the software Dlubal RFEM, which operates on the Finite Element Method - FEM. All elements have been designed for ultimate and serviceability limit state. My thesis contains textual part, inner strengths, static calculations, drawing documentation of composition of structure, drawing documentation of reinforcement and design documentation of the object.
|
|
|
Strengthening reinforced concrete column confined by FRP fabric
Kostiha, Vojtěch ; prof. Ing. Alois Materna, CSc., MBA (referee) ; Bilčík,, Juraj (referee) ; Štěpánek, Petr (advisor)
The doctoral thesis deals with the strengthening of reinforced concrete columns by FRP fabric wrapping. Its aim is to describe the principles of confinement based on the analytical study, numerical simulations and the results of the experimental program. The description of the confinement philosophy is made with respect to the type of FRP material used. It was therefore possible to present a design process of confinement, which accurately predicts the behaviour of the confined columns. At the same time, some effects limiting the effect of confinement (e.g. the method of wrapping, the number of FRP fabric layers, the slenderness of the element, etc.) are included in the design. The dissertation also presents basic information about FRP material and its properties and gives an overview of design approaches of the FRP confined columns. The dissertation also pointing out the shortcomings of the design code ČSN EN 1992-1-1. The stated example highlights the significant variation in properties of confined concrete determined by selected approaches. This variation of properties complicates the design of this strengthening method. The experimental program was used to verify the basic principles of confinement and, through high columns, allowed a description of the behaviour in almost the whole range of interaction diagram. The conclusions of the work provide information on possible future research direction.
|
|
|
Design of selected elements of reinforced concrete structure
Klust, Vojtěch ; Čairović, Dorde (referee) ; Kostiha, Vojtěch (advisor)
Diploma thesis deals with the desing of reinforced two way concrete foundation slab in three variants. In the first variant is slab of constant thickness. In the second variant is haunched slab. In the third variant is slab with piles. The thesis includes a structural design as well as drawings. All calculations were performed in accordance with applicable standards. For the design was used program SCIA Engineer 19.1.
|
|
| |
guest ::
