|
Experimental investigation of electric arc behavior during cutting of stainless steel
Kavka, Tetyana ; Mašláni, Alan ; Konrád, Miloš ; Tossens, S.
The present work is devoted to experimental investigation of electric arc behaviour during cutting of stainless steel. The goal of this work is to define influence of arc voltage fluctuations and anode attachment behaviour on the cutting performance. In most cases the anode attachment was verz luminous and was observed far from the main arc column close to the plate top. The cut material exhibited stronger surface roughness at the anode attachment location. The measured voltage traces showed a so-called restrike mode of oscillations of different frequencies and amplitudes.
|
| |
|
Zplyňování dřeva v plazmatu a produkce plynu s nízkým obsahem dehtů
Hlína, Michal ; Hrabovský, Milan ; Kopecký, Vladimír ; Konrád, Miloš ; Kavka, Tetyana ; Skoblja, S.
Tar content in gas produced by the gasification of biomass always plays an important role because high tar content disables some potentialities of the further treatment of the produced gas. There is a strong effort to produce gas with low tar content from this point of view. High concentrations of hydrogen and carbon monoxide also advance possibilities of the usage of the produced gas. Experiments were carried out in a reactor for plasma gasification equipped with hybrid gas-water stabilized DC torch. They confirmed that the reactor is absolutely suitable for this purpose mainly due to extremely low flow of plasma composed of argon, hydrogen and oxygen and its high inner temperature. The measurements of the tar content, using wood as a treated material, were based on SPE method and the determination of benzene and toluene in a gas phase revealed really low concentrations of tar, mostly below 10 mg/Nm3.
|
| |
| |
| |
| |
| |
| |
| |