|
|
Modification of cathode material based on nickel and manganese for Li-ion cell
Bukáčková, Ivana ; Vondrák, Jiří (referee) ; Kazda, Tomáš (advisor)
This bachelor´s thesis deals with cathode materials for lithium batteries with cell voltage approaching 5V. The first part of the thesis is devoted to the characteristics of Li-ion batteries, electrochemical reactions and properties of electrode materials. She also pays attention to the preparation and measurement of materials LiNi0,5Mn1,5O4, LiNi0,45Mn1,55O4 and LiNi0,55Mn1,45O4. Observed material was measured by electron microscopy, elemental analysis and galvanostatic method,
|
|
|
Batteries for medical applications
Pagáčová, Lenka ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
This master’s thesis deals with the influence of different carbon materials on the properties of Li-S accumulators. The theoretical part of the thesis describes primary and secondary electrochemical sources with a focus on medical applications. The second chapter deals individually with a lithium article. The main part of the thesis is the practical production of electrodes for Li-S accumulators using different types of carbon materials. The effects of these materials on the properties of accumulators are investigated to determine the most appropriate in terms of capacity and stability.
|
|
| |
|
|
Advanced carbon structures as a material for Na-ion batteries
Bečan, Jan ; Čech, Ondřej (referee) ; Kazda, Tomáš (advisor)
This diploma thesis deals with the description of individual types of batteries. The first part is focused to primary and secondary batteries, materials for their positive and negative electrodes with a focus on lithium-ion batteries and their changes over time. The next section focuses on a more detailed description of sodium-ion batteries, used electrode materials and to their problems. Practical part is focesed to preparing of electrode materials and to completing of measuring electrochemical cell and to discribing of measuring methodes and to evaluation of measured data.
|
|
| |
|
|
Study of materials for the Li-ion batteries by electron microscopy
Hujňák, Jan ; Čudek, Pavel (referee) ; Kazda, Tomáš (advisor)
This work deals with problems of lithium-ion batteries. In the theoretical part are described electrochemical sources in general and their division. The main representatives of individual types of electrochemical sources are described in more detail. In the next part the thesis focuses specifically on lithium-ion accumulators, their history, electrochemical reactions taking place inside and materials of individual parts of which the accumulator consists. Next part focuses on electron microscopy and its division into scanning and transmission. Basic parts and the principle of operation are described. The practical part is focused on creating a small cell for examination under an electron microscope.
|
|
| |
|
|
Effect of compaction pressure to the electrochemical properties of the electrodes for Li-S accumulators
Jaššo, Kamil ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
The purpose of this diploma thesis is to describe the impact of compaction pressure on the electrochemical parameters of lithium-sulfur batteries. Theoretical part of this thesis contains briefly described terminology and general issues of batteries and their division. Every kind of battery is provided with a closer description of a specific battery type. A separate chapter is dedicated to lithium cells, mainly lithium-ion batteries. Considering various composition of lithium-ion batteries, this chapter deeply analyzes mostly used active materials of electrodes, used electrolytes and separators. Considering that the electrochemical principle of Li-S and Li-O batteries is different to Li-ion batteries, these accumulators of new generation are included in individual subhead. In the experimental part of this thesis are described methods used to measure electrochemical parameters of Li-S batteries. Next chapter contains description of preparing individual electrodes and their composition. Rest of the experimental part of my thesis is dedicated to the description of individual experiments and achieved results.
|
|
|
Control of the 3D printer using Raspberry Pi
Lokajíček, Lukáš ; Kazda, Tomáš (referee) ; Vyroubal, Petr (advisor)
The bachelor project deals with the possibility of solution to control 3D printer type RepRap using single-board computer Raspberry Pi. The theoretical part of semester project contains 3D printing theory focused on 3D printer built at the Department of Electrical and Electronic Technology. The last part of bachelor project is devoted to practical design of compact interface that assure communication between 3D printer and controlling software using Raspberry Pi.
|
|
|
Study of life cycle of the accumulators
Babieska, Lukáš ; Binar, Tomáš (referee) ; Kazda, Tomáš (advisor)
This bachelor work deals with monitoring the life cycle of a lithium-ion battery. The theoretical part describes the history and development of electrochemical cells. Lithium-ion batteries are a separate chapter. There are described their principles, the most used materials for the production of negative and positive electrodes, loading characteristics and the influence of temperature. In the practical part, the influence of temperature on changes of internal impedance, cell capacity and efficiency of energy supply during the battery life cycle is monitored.
|
guest ::
