|
|
Golf club
Sedláčková, Markéta ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject matter of my Diploma thesis is the project of a new golf club. The building has one floor and is covered by a flat mono-coated roof. Spacious terraces accessible from first floor are the integral parts. Vertical load bearing and non-load bearing walls are designed from Porotherm walling system. Horizontal load bearing ceiling constructions are designed from an prestressed ceiling panels Spiroll. Foundations are designed reinforced concrete. The building is divided into two separate operating units. The project emphasizes the layout plan, thermal technical properties and safety in use.
|
|
|
Detached house on a lake
Sedláčková, Markéta ; Vránová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject matter of my Bachelor thesis is the project of a new single-family detached house situated on a lake. The building has two over-ground floors and is covered by a flat double-coated roof. Spacious terraces accessible from both the first as well as the second floor are the integral parts thereof. Vertical load bearing and non-load bearing walls are designed from Porotherm walling system. Horizontal load bearing ceiling constructions are designed from an iron-concrete construction. The load bearing first floor terrace construction shall consist of a welded steel construction. The large diameter piles foundation construction is designed from an iron-concrete construction. The wall footing construction of piles, load bearing pillars and slab floating the building construction is designed from underwater iron-concrete construction. The project emphasizes the layout plan, thermal technical properties and safety in use.
|
|
|
Public library
Fučíková, Šárka ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of this diploma thesis is a public library in Mohelnice. The object is designed with sand lime blocks, it has a basement and three floors. Basement is used for storage, first and second floor fulfill the function of library and a meeting room can be found in the third floor which is used for a purpose of the library and municipal office. The object is roofed by a cold roof with load-bearing structure made by nailed timber truss. The roofing of utility room is designed as a warm flat roof. Ceilings are designed from cast in place reinforced concrete floor. The whole object is insulated with contact thermal insulation made by mineral wool insulation. Facade of the first floor is designed with stone veener.
|
|
|
Nursery School
Šnédar, Marek ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This Diploma Thesis deals with a new-building project of a nursery school in a cadastral area of the town Tišnov. The building is situated in a calm peripheral part of a town. The building is projected as a single-storey, has an atypical ground plan, aproximately "Y" shaped. Vertical constructions are bricked of ceramic blocks and they are based on foundation-belts. The roof is flat, one-couted, with a classical order of layers. The building is functional divided in economic part and two child´s sections of the nursery school. The general capacity of the nursery school is 48 children.
|
|
|
Farm building
Bank, Martin ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The aim of the master’s thesis is a project documentation of an farm building. It is a new building of stable for breeding of cows of Holstein cattle and accessories necessary for securing it is operation. The building is located in the cadastral territory of municipality Chromeč, district Šumperk. Base consist of a single building object and a stable construction builds up a second object. These two objects are operationally linked and they are connected by the gangway. The stable is designed for a maximum of 278 heads of Holstein cattle. The stable is a single-storey indoor building. In the background there are rooms and equipment necessary to procuring stable operation. A Base is a brick object with two floors. On the ground floor is a waiting room, parlour, technical facilities, rooms for a production of cheese and a cheese shop. Attic there is a background of employees, which is only over a part of the object. Roofs are slanting saddle-shaped. Building estate is situated in the flat terrain.
|
|
|
Fire station type P4, Chrudim
Šťastný, Jan ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the project documentation for the construction of a new building of the fire station type P4 in Chrudim. The building is located on land lot No. 2412/7 and 2412/8, in the cadastral area of Chrudim. The house is divided into two parts; an administrative part with a room for firefighters and a garage, which contains the complete technical facilities of the station. The fire station is situated in the existing housing development of the town Chrudim, specifically in part Chrudim II. The administrative part of the building has two floors. On the ground floor, there are individual offices and a gym, including technical facilities. On the first floor, there are rooms for firefighters and rooms for their daily services. Next to the land lot, there is a local road of type III. The house is designed to respect the municipality’s territorial plan and the surrounding built-up area. The project documentation is elaborated in compliance with current building legislation, regulations, and standards. The house‘s profile is irregular, and the building has two flat roofs and a span roof. The system of construction is made of bricks and colomns. The building is situated on slightly sloping terrain.
|
|
|
Apartment building
Křenková, Ivana ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a new apartment building. The proposed building is located in Rožnov pod Radhoštěm in a newly developing housing development. The apartment building is designed as not being connected to the surrounding buildings. It consists of four floors above ground and one underground floor. On the upper floors there are 10 residential units, common areas with the mechanical rooms and a garage with three parking spaces. In the basement there are cellars belonging to individual apartments. All apartments have a terrace or balcony. The building is based on monolithic foundation strips made of plain concrete. The perimeter masonry in the basement is made of permanent shuttering kits/systems, in the upper floors of ceramic blocks, which is insulated with the ETICS contact thermal insulation system. In the above-ground floors are ceiling structures made of semi-assembled ceiling blocks, in the basement monolithic reinforced concrete slabs are designed. The roofing of the building is designed as a flat single-skin roof. Part of the bachelor thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
|
Detached house with car service
Novotný, Jakub ; Petříček, Tomáš (referee) ; Kacálek, Petr (advisor)
The theme of bachelor´s thesis is new-building detached house with service in Hronov. The service is car repair for the homeowner. The building is set in slighty sloping terrain. It has an aboveground floor and one undeground. The building is designed of system Porfix and ceiling construction of reinforced concrete structures. The roof strukture is a aisle roof with inclined 12 and 9 degrees.
|
|
|
Multifunctional building, Brumov - Bylnice
Skřek, Daniel ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of this diploma thesis is the design of a multifunctional building, which consists of parking lots, store section, office as well as dwelling units. Multifunctional building has four above-ground floors, full basement and a flat roof. During processing, emphasis was placed on layout solutions to be designed according to legislation and standards. In the basement there are parking lots, the ground flood is used as a store section, the first floor consists of office units designed for start-up companies. The third and fourth floor consists dwelling units from one-bedroom to three-bedroom apartments. The building has a concrete frame structure combined with a masonry system from Porotherm ceramic pieces. Horizontal load bearing system is designed of two way reinforced concrete slabs. Walls bellow the ground level are made from core-filled reinforced concrete blocks. The building is supported by the spread footing concrete system. Multifunctional building is situated in flat terrain in the city of Brumov-Bylnice.
|
|
|
The multifunctional building Mlynska, Brno
Pelčák, Vlastimil ; Ležatka,, Lukáš (referee) ; Pavlovský, Tomáš (advisor) ; Kacálek, Petr (advisor)
This bachelor’s thesis is created on the basics of an architectural study designed by me in the third year of the bachelor’s degree studies. The thesis elaborates this architectural study into the following degrees of the project documentation. The topic of this work is a design of Multifunctional building Mlynska in Brno. The work reacts on the current change of the city district Trnita in which the estate for the design of the building is located. Gradual revitalization of the whole city district is supposed. The main structure of the multifunctional building and few other auxiliary buildings are located on the estate. The multifunctional house is of a cubic form with a regular placement of windows. The building has two below ground and fourteen above ground storeys. Its height is a reaction on the new and newly emerging building in a nearby surrounding. Due to a higher number of storeys it is moved further from the borderline of street. Both below ground storeys are of technical character. In the first below ground storey is designed a café, shop and an entrance for residents. In the second and third storeys are offices. From fourth to thirteenth storeys are located flats of various dispositions – together there is 28 housing units. The last storey serves for all of the residents – there is a rooftop terrace, a common room and necessary facilities. From the constructional point, the house is arranged as a combination of a monolithic reinforced concrete vertical parts and prefabricated horizontal panels. Perimeter is surrounded by a frame into which are inserted windows. Centre of the building comprises of stiffened core of vertical link. The building is designed as a modern premium living in a minimalistic, functional and aesthetic design.
|
guest ::
RSS feed.