National Repository of Grey Literature 121 records found  previous11 - 20nextend  jump to record: Search took 0.00 seconds. 
Elimination of defects in the gears manufacturing
Petříček, Vít ; Jaroš, Aleš (referee) ; Fiala, Zdeněk (advisor)
The aim of the diploma thesis was to analyze qualitative outages in the production of gears for a gear pump and to minimize them. The largest amount of outages was caused by the burning of the surface during face grinding. After analyzing the current state of production there were created some suggestions to avoid this issue. Also there was found some space to speed up the whole process. Suggestions to eliminate burning have been tested with minimal impact on production. The reduction of outages for burned surface was achieved and also the cycle time was shortened. Those suggestions will be implemented in serial production.
How pupils use digital technology when doing school homework
Jaroš, Aleš ; Černochová, Miroslava (advisor) ; Tocháček, Daniel (referee)
The aim of this diploma thesis is to describe the role of the digital technologies in the homework preparation of the pupils, how do they use the digital technologies and whether they use it for the learning at all. This thesis evaluates also if the pupils can use the digital technologies for learning and in which way they use them, what is their vision of learning, what pluses and minuses in the digital technology usage see the pupils from the sixth to ninth grade. How do the parents encourage their children to use these technologies for the homework. The theoretical section focuses on the role and possibilities of using digital technologies in education, especially in homework preparation. It defines a pupil's digital competence and the characteristics of the network generation. The practical section includes the conclusion of 3 questionnaire surveys. The first of which the author did among 127 pupils of the 2nd grade of an unnamed elementary school in the Ústí region. Its aim was to find out whether and how pupils use digital technologies in their home preparation for school and whether these technologies simplify the learning process for them. The second questionnaire was completed by parents of pupils of the 2nd grade. The aim of this questionnaire survey was to find out how parents support...
Machining of hardened steels
Veselý, Ondřej ; Osička, Karel (referee) ; Jaroš, Aleš (advisor)
Diploma thesis on Machining hardened steels is focused on the analysis of longitudinal turning of hardened steel 14 109 by using a tool from PKNB in terms of measuring the force load using a dynamometer and then evaluating the surface quality. The theoretical part deals with the issue of turning technology, cutting materials and heat treatment of steel. In the practical part, the influence of cutting conditions on the resulting values was assessed during the experiment. Twelve samples with different combinations of cutting conditions were tested, then was selected a sample that met the criterion of combining minimum cutting forces values and surface quality. The experiment shows that force load values can be achieved twice less by combining cutting conditions with an appropriate combination.
A single-speed gearbox made by 3D printing
Hykolli, Denis ; Jaroš, Aleš (referee) ; Fiala, Zdeněk (advisor)
The aim of these theses was the creation of a single-stage gearbox by additive technology FDM / FFF. By chosen values was made dimension calculation for gears. The 3D model of the gearbox was designed in 3D software Autodesk Inventor. Single parts were produced on an FDM 3D printer by Prusa Research. Manufacturing programs for parts were prepared in PrusaSlicer. These programs were used for producing individuals parts on 3D Printer. Transparent material and printing parameters for the top of the gearbox were chosen by visual test and test of light intensity. The total cost of model production is calculated in the work. The result of these is a completely working model of a single-stage gearbox with a transparent top of the gearbox.
Measuring cycles in control systems of CNC machines
Hamřík, Jiří ; Jaroš, Aleš (referee) ; Gregor, Lukáš (advisor)
In the first two points, the bachelor's thesis focuses on the comparison of CNC and NC machines and methods of control and programming of CNC machines, a description of the control system of CNC machines from selected producers and the characteristics of measuring cycles. Two producers were selected to describe the technology of measuring tools and workpieces using probes. In the third point of the bachelor's thesis, a practical demonstration of measurements with tool and workpiece probes from RENISHAW is performed. A tool correction was performed followed by measurement of the workpiece with a probe. For statistical evaluation, digital micrometer measurements were added, including comparison and evaluation of the obtained results.
Machining on a universal milling machine equipped with a divider
Luňáčková, Nikola ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
This bachelor's thesis deals with milling using a dividing device. The aim is to acquaint with the technology of machine milling, its kinematics, machines, tools and about the use of a dividing device. The theoretical part deals with machine milling on a universal milling machine equipped with a cutting device and milling using CNC machines. The practical part compares these two types of milling using a product made on a CNC milling machine and a machine universal milling machine equipped with a cutting device, using the same tool diameters.
Selection of an optimal tool for the selected machining technology
Podstata, Jan ; Jaroš, Aleš (referee) ; Fiala, Zdeněk (advisor)
This thesis compares the properties of four types of replaceable cutting tool inserts from different suppliers during milling. The comparative factors are cutting force, material loss of the insert and the roughness of the resulting surface. The thesis is divided into two parts - a comprehensive overview of the current state of knowledge and an experiment. The first part analyzes the load, the possibility of its measurement, surface treatment of tools, milling cutters and replaceable inserts. The experiment took the form of measuring the load during face milling, measuring the surface roughness of the machined material and measuring the material loss of the inserts on an optical strain gauge. The replaceable cutting tool inserts were compared based on the performed measurements.
Draft of pin production technology
Hrdlička, Martin ; Osička, Karel (referee) ; Jaroš, Aleš (advisor)
The Master's thesis, written during the study of M-STM Manufacturing Technology and Management in Industry, is focused on the concept of the production technology of a pin. The thesis includes a description of forming and machining technology in terms of possibilities of their application in the production of the pin. Furthermore, by comparing both technologies and preliminary economic evaluations of production, it leads to the choice of the production method. This production method is then described, and the description contains the production process steps including the creation of the CNC program. The conclusion of the thesis is devoted to the technical and economic evaluation of the production concept.
Modification of 3D FDM delta printer frame for improvement of print quality
Butakov, Aleksandr ; Jaroš, Aleš (referee) ; Zemčík, Oskar (advisor)
This work is focused on solving the problems of delta 3d printer frame rigidity and impact of rigidity on final quality of 3d printing. A variant of a 3d printer on a classic Kossel-shaped frame has designed and built. Further, frame strength analysis and improvement design is performed, with subsequent production of a new variant and comparison of the 3d printing results of both variants. The result of this work is to show how the frame construction really affects the print quality.
Manufacturing technology of low friction rings
Svoboda, Kryštof ; Jaroš, Aleš (referee) ; Zouhar, Jan (advisor)
The content of this thesis deals with the manufacturing of the prototyped series of low friction ring, proposing of the serial production and economical and technical evaluation. This thesis also solves the surfacing of low friction rings and testing. The thesis is devided into two main parts. First part deals with selection of material, tools and process of manufacturing low friction ring. Second part concerns surfacing and after testing. The thesis ends with economic and technical evaluation.

National Repository of Grey Literature : 121 records found   previous11 - 20nextend  jump to record:
See also: similar author names
5 Jaroš, Adam
3 Jaroš, Antonín
Interested in being notified about new results for this query?
Subscribe to the RSS feed.