National Repository of Grey Literature 21 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Vedení elektrického proudu a signálů u zemědělských traktorů
Horák, Lukáš
The aim of this bachelor thesis is to introdukce the possibility of modernizing part of the wiring installation in the mass-produced Zetor tractor to the reader. At the beginning of the work, the reader is acquainted with the basic principles of the elect-ric current itself, its flow, specifically in the design and construction of cable harness. Here are also described the most common requirements for the construction of the harness itself, from the design of the conductor and its insulation to the creation of cable harness. Also included is a section dedicated to the actual production of a par-ticular cable harness in a specialized company, including its testing during produ-ction and before its shipment to the customer. The conclusion deals with the imple-mentation of the newly designed cable harness, including its comparison with the previous version and the economic balance.
Industry 40 Testbed Autonomous “Ice Crusher“ Cell
Horák, Lukáš
This article describes design and creating an autonomous cell called „ice crusher“ designed to be used as a part of Industry 4.0 testbed. The testbed is supposed to simulate a small factory and is used to demonstrate parts of Industry 4.0. The main task was to design the mechanical part of the cell and equip it with sensors. In the first part of the article is to describe the mechanical part that is designed in NX software. In the next part suitable electronics is selected. The electronics was selected so that it provides safe and reliable cell control, while being as simple and cheap as possible. The control unit fot the cell is PLC 1200 and as for visualisation a HMI touch panel made by Siemens was chosen. The control unit was programmed using LAD and SCL languages.
Design of mechanical, electrical construction and software equipment of autonomous cell "Ice crusher" for Industry 4.0 testbed.
Horák, Lukáš ; Benešl, Tomáš (referee) ; Pásek, Jan (advisor)
The goal of this bachelor thesis is design and construction of an autonomous cell on a production line with the purpose of being an „ice crusher“. The purpose of this cell is to be part of a Testbed. The cell will be controlled using a HMI touch panel and PLC 1200. Information about how much ice the cell should pour into a glass is stored in an NFC chip on the bottom of the glass. The first part of the thesis comprises of brief introduction to Industry 4.0 alongside with description of the default and current state of Industry 4.0 testbed. Another part describes mechanical and electrical design of the cell. Last part of the cell describes software of the cell alongside with description of testing and installing the cell to the testbed.
Microstructure of carbon black nanomaterials studied by X-ray scattering
Machovec, Petr ; Dopita, Milan (advisor) ; Horák, Lukáš (referee)
Název práce: Studium mikrostruktury uhlíkových nanomateriálů pomocí rentgenové difrakce Autor: Petr Machovec Katedra: Katedra fyziky kondenzovaných látek Vedoucí bakalářské práce: RNDr. Milan Dopita, Ph.D., Katedra fyziky kondenzovaných látek Abstrakt: Předkládaná práce se zabývá studiem mikrostruktury, struktury a reálné struktury turbostratického uhlíku a uhlíkových nanotrubic pomocí metod rozptylu rentgenového záření. Klastry turbostratického uhlíku jsou popsány pomocí sady fyzikálních parametrů. Pomocí počítačových simulací je popsán vliv těchto parametrů na výslednou rozptylovou křivku. Dále je předkládán popis dvou typů uhlíkových nanotrubic a je popsán vliv typu a rozměrů uhlíkových nanotrubic na výslednou rozptylovou křivku. Pro experimentální část práce byla připravena série vzorků turbostratického uhlíku žíhaného při teplotách 300℃, 600℃, 800℃, 1000℃, 1200℃, 1400℃ a 1800℃. Pomocí maloúhlového rozptylu rentgenového záření byla určena velikost nanočástic a jejich rozdělení, velikost mikropórů, specifický povrch a dimenze povrchového fraktálu. Další fyzikální parametry jako velikosti a rozdělení velikostí klastrů La a Lc turbostratické uhlíku, mřížové parametry a a c a střední kvadratické výchylky atomů ve směru grafenových vrstev a ve směru kolmém byly určeny z širokoúhlových rentgenografických...
Frequency of normal weight obese preschoolers and its physical fitness - selected populations of children from 6 Prague kindergartens
Horák, Lukáš ; Musálek, Martin (advisor) ; Kokštejn, Jakub (referee)
Title: Frequency of normal weight obese preschool children and its physical fitness - selected populations of children from 6 Prague kindergartens. Objectives: The goal of this thesis is to find out the occurence and physical fitness of preschool age children with normal weight obese and compare it with physical fitness of normal weight non-obese preschool children and children with overweight and obese. Methods: Observation is the main method used in this thesis (regarding to title). We analysed 289 preschool aged children and chose BMI index in the range of 25th to 80th percentil, according to Vignerova at al. (2006) along with values of each skinfold higher then 85th percentil according to Bláha et al. (1990), to identify normal weight obese children. Physical fitness was based on several tests: multistage 20 metre shuttle run, standing long jump, sit-ups, sit- and-reach, throw ball with alternative hands. To analyse all the facts and get results we used descriptive statistics, tests of normaltity and ANOVA. Results: We identified n = 12 normal weight obese children (4,15 %) from all participating children. Results of research showed us that normal weight obese children were worse than normal weight non-obese children by 5,80 %, respectively by 4,76 %. Children that were overweight and obese had...
Academic dishonesty and its relationship to work ethics
Horák, Lukáš ; Preiss, Marek (advisor) ; Krámský, David (referee)
The thesis is concerned with possible relationship between the rate and kinds of academic dishonesty and work ethics. In the first segment of the theoretical section of the thesis, the extent of present research concerned with the reciprocal relationship of breaking of the rules in the context of school and work and the possibility of predicting aspects of work ethics on the basis of having knowledge about the rate of academic dishonesty of a given individual, is summarized. The second theoretical segment is a descripitiona and discussion of research of factors which affect both dishonesty in the school context and aspects of work ethics. On the basis of identification of these factors are in the empirical section analysed data, which were acquired through surveying of university level and high school students. Significant difference betwen the rates of dishonesty in high school and university level context, which is contradictory to some of the previous research literature.Relationship of the students to their grades and to some extent, gender, were shown to be significant influence on rate of academic dishonesty. The analysis of the direczt relationship between academic dishonesty and work ethics has yielded mixed results, suggesting, that the relationship si more complex than previously suspected
Study of the structure of ferromagnetic semiconductors by x-ray scattering methods
Horák, Lukáš ; Holý, Václav (advisor) ; Mikulík, Petr (referee) ; Stangl, Julian (referee)
We studied epitaxial layers of Gallium Manganese Arsenide by various x-ray scattering methods. Since the positions of the Mn dopant in the a host GaAs lattice are crucial for magnetic properties of this material, we focused mainly on a development of the laboratory diffraction method capable to identify Mn in particular crystallographic positions. From the measured diffracted intensity distributed along Crystal Truncation Rods, it is possible deduce the density of Mn interstitials in two non-equivalent crystallographic positions. It is possible to decrease the interstitial Mn density by annealing. We demonstrated our method on severally annealed epitaxial layer. The depth profile of interstitial density was determined after each annealing. The annealing process was simulated by the solving of the Drift- Diffusion equations. From the comparison with the experimentally determined interstitial densities, we estimated the diffusivity of Mn interstitials in the GaAs lattice. Powered by TCPDF (www.tcpdf.org)
Business Plan
Horák, Lukáš ; Fischer, Jan (referee) ; Koudelková, Petra (advisor)
This thesis is focused on creating a bussines plan of Japanesse type tearoom. The theoretical part defines basic concepts such as business, entrepreneur, enterprise, business plan also includes distribution companies under legal forms in the Czech Republic, and insight into structuring a business plan. There are analyzes necessary for establishment in conclusion of the theoretical work. The practical part is focused on the preparation of the business plan itself tearoom in Kladno. There are all needed requisites of bussines plan, from baseline informations about company until financial statement.
Analysis and Design an Information System for STAVOČ spol. s r.o
Soukop, Martin ; Horák, Lukáš (referee) ; Dydowicz, Petr (advisor)
ABSTRACT This work deals with the analysis and design of information system for company STAVOČ spol. s r. o., which is engaged in earthworks, building works, renovations and locksmithery. The work is divided into three main parts. The first part is the introduction to the theoretical basis. The second part is an analysis of the current situation, where the use of specialized techniques is to assess the state of information technology and systems, together with the requirements of company on this system. In the third part, I will discuss the proposal of the information system according to specific requirements on functionality.

National Repository of Grey Literature : 21 records found   1 - 10nextend  jump to record:
See also: similar author names
5 Horák, Ladislav
2 Horák, Lubomír
1 Horák, Luboš
5 Horák, Luděk
Interested in being notified about new results for this query?
Subscribe to the RSS feed.