|
|
Structual welding of aluminium alloy
Blahák, Petr ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The project elaborated in frame of engineering studies branch 2303R002 presents a project that contains welding a structure made of aluminium alloy. There were two usable methods selected, based on literal study of welding aluminium alloys, TIG welding and friction welding, and these were compared with alternative methods of joining, hard soldering and bonding. A work procedure was made for TIG method, soldering and bonding and four experimental joins were made thereafter. Project compares these methods mainly in economical way, also in way of technological difficulties and in way of observance the strength of base materials. Project also deals with problems with lowering strength of base material in heat affected area, burn out of thin material, tendency of aluminium to fill with hydrogen, quick oxidation and consequent hard surface layer emerging on the aluminium.
|
|
|
Evaluation of the fillet weld geometry on process parameters for laser welding of stainless steel
Polášek, Marek ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The present thesis deals with welding of samples to examine the resulting geometry of the weld in dependence on process parameters of the laser. Welding was carried out without additional material using a fibre laser. The material used was stainless steel ČSN EN 17 241. The values of regression coefficients of the resulting graphs show that the changes in the weld geometry - width and depth - vary quite linearly depending on the welding performance. Especially the weld depth is a common requirement in technical practice; the measured results of the experiment can be used to set the process parameters to achieve the desired depth of weld. Some welds exhibit weld defects such as porosity caused by formation of the keyhole due to a large dynamics of the process. The technical-economic evaluation offers a price estimate for one meter of weld for each welding speed used.
|
|
| |
|
|
Welding of stainless steels in food industry
Staněk, Vít ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The work, created in the bachelor degree, is engaged in welding technology food containers, namely CTK. There are some technologies with their advantages, disadvantages and specifications for welding stainless steels. The selected CTK is given manufacturing process, in the experiment were created welds, which are evaluated and WPS.
|
|
|
The production of domestic grill
Blahák, Radek ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The work deals with the production of domestic grill from discarded storage pressure vessel domestic water of non-alloy steel grade 11 373. The work is divided into theoretical and experimental. The theoretical part is devoted to the study of the manual electrode welding, design appropriate welding parameters and selection of welding electrodes. Further work is focused on graphic design of the grill, under which it will produce grill. The practical part is devoted to verification of appropriate welding parameters for the selected electrode to the control samples, evaluation, and then use the most appropriate type of electrode and the welding parameters for the design of the grill.
|
|
|
Possibilities of heat transfer regulation while MIG/MAG welding
Mášová, Pavla ; Hála, Michal (referee) ; Daněk, Ladislav (advisor)
The project is elaborated in terms of bachelor's studies of branch 2307. The project is submitting possibilities of heat transfer regulation while MIG/MAG welding. Energy storage welding is a conventional method of heat regulation. Other methods were developed by company producing welding unit. A company Kemppi offers a method Fast Root for the heat regulation, methods Rapid Arc and Rapid Melt were developed by AGA AB and company Lincoln Electric offers a method Surface Tension Transfer. Method Cold Metal Transfer by Fronius company and ColdArc by EWM company are used for reduction of heat transfer into the weld steel-aluminium.
|
|
|
Weldig of the different type of steel by the Yb-YAG laser
Chlád, Luboš ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The master's thesis presents an experiment of welding of high strength steel Docol 1200 M and of steel DC01 by the fiber Yb-YAG laser. The experiment is based on testing welds which were made during the experiments. The lasers, laser technologies of welding, steels of higher strength, tailored blanks technology and testing of welds are described in the theoretical part. The practical part contains description and evaluation of tests of welds – transverse tension test, Vickers hardness test, Erichsen cupping test and macrostructure and microstructure test. The final evaluation results of the experiment are presented in the conclusion of the master's thesis.
|
|
|
Measurement of cutting edge roughness in the process of laser metal cutting using the Yb-YAG laser
Maňas, Petr ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The project elaborated in frame of bachelor´s degree program B-STG (“Mechanical Engineering Technology”, 2303R002), evaluates the roughness of samples of cutting edge laser cutting. Cutting performed the fiber Yb:YAG laser. The samples consisted of structural steel J235JR and DC01, stainless steel X5CrNi18-10 and aluminium alloys AIMg3. They were evaluated according to the ČSN EN ISO 9013 standard. The classification of samples into classes according to the standards of accuracy. The theoretical part is consists of a description of the methods of cutting, a basic principle of the laser and its types. It includes cutting parameters and their influence on the quality of subsequent defects. It is described roughness measurement and standard ČSN EN ISO 9013.
|
|
|
The study of the influence of process parameters on the roughness of the cut for flame laser cutting of structural carbon steel
Macháč, Patrik ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
This bachelor thesis deals with the cutting of material with laser in an oxidizing environment. It is divided into two parts, theoretical and practical. The theoretical part describes general methods for cutting materials, their advantages and disadvantages, further current industrial lasers are described, as well as the influence of parameters on cutting quality. In the experimental part has been processed the influence of process parameters on the quality of the cut and comparison with ISO 9013. Material used in the practical part is the structural carbon steel called S235JRG2, which was cut in the oxidizing environment. Based on the evaluation of surface, the price of lasser cutting of one meter was selected and then as th best option of settings process parameters for achieving good surface quality was selected. At the conclusions of the thesis there are compared changes in proces parameters and their evaluation
|
|
| |
guest ::
RSS feed.