National Repository of Grey Literature 119 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Thermal properties of automotive light sources - Halogen sources
Hlubinka, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of master´s thesis is to get acquainted with the design and materials used in selected automotive light source – tungsten halogen lamp. Further, the thesis focused on the theory and appropriate selection of the thermal measurement method on a real sample. Subsequently, a model of the light source and its simulation in the ANSYS – Maxwell 3D and Mechanical programs are created. Finally, the results of the thermal simulation and the non-contact measurement of the tungsten halogen lamp are evaluated
Low power electrical machines
Martinek, Radek ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis introduces various types of electric motors. Overall, it is divided into 6 chapters, which the first deals with special type of electric motors, namely: permanent magnet DC motor with coreless winding, piezoelectric motor and three phase induction motor with solid rotor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The second part of thesis deals with perspective types of motors, namely: single phase induction motor and reluctance motor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The third chapter deals with analysis parameters of single phase induction motor. The analysis is performed on a borrowed motor from ATAS company by measurement and verification using simulation program Ansys Maxwell. The fourth part discusses the possibilities of increasing the effectiveness of borrowed electric motor. The following is chapter five, which deals with increasing the efficiency of the motor by changing metal sheets. Results are verified by simulations with Ansys Maxwell and measurements on sample of electric motor. The last part presents electric motor design with new selected electric sheets with lower specific losses, but also with lower magnetic induction.
Methods of analysis of vibration signals
Sivera, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of the thesis is to focus on the different methods of analysis of vibration signals. Focusing on the physical fundamentals of vibrations and a description of their origin in an electrical machine. Describe the vibration sources from mechanical across the electromagnetic to the aerodynamic. Defining the current defects of electric machines and sensors suitable for the measurement of vibrations in an electric machines. Introduction to the methods of analysis of vibration signals in the time and frequency domain. Then using some of these methods for the analysis of vibration signals measured asynchronous motors with different manufacturer defined production defect. The conclusion is composed from the comparison between measured and analyzed results.
Influence of rotor slots number on a small induction motor losses
Palsovics, Norbert ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
The aim of this semester work is to analyze the losses of induction motor, according to their measure, use programs using the finite element method for the detection of the motor and the subsequent evaluation and comparison of the results obtained. The first part deals with the general AM, losses and measure their losses. The next section is very Lossmeasurement submitted asynchronous motors. The measured two machines have different characteristics in the sheet. The following section is calculating the losses using the finite element method using ANSYS Maxwell and RMXprt.The next part is the analysis of motor losses with a different number of rotor bars. This section is addressed to the models developed and validated by measuring the actual machine.
DC motors for general purposes.
Randa, Daniel ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This work deals with innovation DC permanent magnet motor for low power. The work is divided into three tasks. The first part is to survey serially produced DC motors. The second part is to choose one particular DC motor drawn from the survey and carry out its analysis and detailed description. The last part is to design innovations to selected DC motor.
Automobile Charging System
Kovačík, Lukáš ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This Bachelor thesis analyzes recharging systems in automobile. It explains main components of electric circuit used in automobile alternators, functions of each part of the alternator, comparison of the most common types of alternators. Main focus is to analyze and inovate the area of power losses, which determines the efficiency of each type. Final part of this thesis describes the analytical calculation of a three-phase generator.
Single phase induction motor start optimization
Glogar, Jaroslav ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
This bachelor thesis deals with the influence of capacitors on a start of a single phase induction machine and start optimization. The first two chapters refer to a theoretical part of the issue, describing construction, the function principle, the torque characteristic. Also used types are named there, a special emphasis is given to a split phase induction motor with the capacitor and auxiliary winding. It also describes the influence of the capacitor to a breakaway torque. The next part studies the analysis of the concrete machine by the laboratory measuring. Results of measured windings resistance, rated operation, load characteristic, mechanical losses and locked-rotor test are stated here. The main part of the thesis is dedicated to an optimization of wiring auxiliary winding, especially for breakaway torque. It is based on creating models in program ANSYS Maxwell, where an analytical calculation in module RMxprt and a calculation per finite element method (FEM) is realised. Three models are demonstrated here. The first one is identical with the measured machine, so with the permanent split capacitor. That model is created to be compared with the measuring. Another model has a capacitor start, and the last one has two capacitors – for start and run. For the last model the rotor cage with a reduced resistance of winding is used.
A comprehensive assessment of a laboratory counter
Hoferek, Jiří ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
The work is dedicated to the review of electrical equipment and low-voltage installation according to standards ČSN 33 1500 and ČSN 33 2000-6. Furthemore, the work deals with making and wiring of laboratory desks, specifically laboratory desk of the Department of power electrical and electronic engineering, and his ergonomic design.
DC motors for general purposes.
Randa, Daniel ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This work deals with innovation DC permanent magnet motor for low power. The work is divided into three tasks. The first part is to survey serially produced DC motors. The second part is to choose one particular DC motor drawn from the survey and carry out its analysis and detailed description. The last part is to design innovations to selected DC motor.
The methodology for calculation small induction motor
Bureš, Petr ; Duroň, Jiří (referee) ; Hájek, Vítězslav (advisor)
This thesis addresses analysis of problematics concerning induction motors. The introduction is dedicated to description of basic principles of induction motor functions, describes individual construction components and also focuses on brief description of current regular design of those machines. The following section is dedicated to the design method and procedure for calculating, mainly focused on single phase induction motor with connected capacitor. The last section is focused on problematics concerning induction motor efficiency together with possible methods of loss reduction and efficiency improvement following the example of engine design.

National Repository of Grey Literature : 119 records found   previous11 - 20nextend  jump to record:
See also: similar author names
5 Hájek, Viktor
8 Hájek, Vojtěch
9 Hájek, Václav
1 Hájek, Vít
Interested in being notified about new results for this query?
Subscribe to the RSS feed.