|
|
Inverter for single-phase island network
Klčo, Michal ; Folprecht, Martin (referee) ; Procházka, Petr (advisor)
The thesis deals with a design and construction of voltage converter from 12 V DC to 230 V AC with frequency 50 Hz. Maximum output power of this device is 250 W. As a control circuit has been used IC TL494CN. The device includes undervoltage protection, which is applied if the voltage of the supply battery drops and protection against battery overcharging by solar panel. It also develops a proposal for integration the inverter into the island power system.
|
|
|
Electronic equipment for high-power flash light
Fritsch, Karel ; Folprecht, Martin (referee) ; Knobloch, Jan (advisor)
Point of this thesis is introduction to topology of small power switching power supplies and final application of gained knowledge during development of converter for charging capacitor battery of high power photographic flash. Thesis also contains design of control unit with microcontroller and description of work process of activation individual function blocks.
|
|
|
DC switching power supply
Látal, Jiří ; Folprecht, Martin (referee) ; Lažek, Tomáš (advisor)
Bachelor’s thesis discusses the design of an adjustable DC/DC converter with an output voltage of 30 V and a current of 10 A. The first part described three basic DC/DC converter topologies and the scheme of power and control structure of the converter. As a suitable topology of power supply was selected a two-switched forward converter. The integrated circuit SG3525ADWR2G was chosen as the PWM modulator for the converter. The second part of the thesis described the design and testing of the switch mode power supply.
|
|
|
High-Voltage Sources for AC Cell Electroporation
Folprecht, Martin ; Drábek,, Pavel (referee) ; Damec,, Vladislav (referee) ; Červinka, Dalibor (advisor)
This doctoral thesis deals with an application of power converters in experimental medicine. Contemporary knowledge about a relatively new electroporation method and present solutions of power converters used for this method are analyzed at this work. The main part of the thesis is focused on a design and development of a new high-voltage generator proposed to AC electroporation. The last part documents an experimental verification of its function.
|
|
|
Three-phase converter for synchronous servomotors
Perout, Miroslav ; Folprecht, Martin (referee) ; Červinka, Dalibor (advisor)
This diploma thesis is dealing with the design of a DC / AC converter for the control of PMSM motors. In the first step, the type of motor and the possibilities of sensing the position of the rotor are described. Subsequently, the power section is designed and the losses, heating, and approximate efficiency of the inverter are calculated. In the following step, the processor is selected and individual communication and protection circuits are designed. At the same time, control algorithms are analyzed. The last part is describing the implementation of the PCB and the inverter as a whole.
|
|
| |
|
| |
|
|
AC Cell Electroporation Based on Asymmetrical Waveform
Folprecht, Martin ; Cervinka, Dalibor ; Novotna, Veronika
This paper discusses an application of different waveforms during a cell electroporation process. Latest scientific papers emphasize advantages of asymmetrical waveform applied to tissue. Higher effect of the electroporation process is reached and muscle contractions are less significant. Most highvoltage generators are based on a controlled discharge of storage capacitors. We present a different solution of the generator, where a power part contains a pulse transformer.
|
|
|
High-Voltage Sources for AC Cell Electroporation
Folprecht, Martin ; Drábek,, Pavel (referee) ; Damec,, Vladislav (referee) ; Červinka, Dalibor (advisor)
This doctoral thesis deals with an application of power converters in experimental medicine. Contemporary knowledge about a relatively new electroporation method and present solutions of power converters used for this method are analyzed at this work. The main part of the thesis is focused on a design and development of a new high-voltage generator proposed to AC electroporation. The last part documents an experimental verification of its function.
|
|
|
DC switching power supply
Látal, Jiří ; Folprecht, Martin (referee) ; Lažek, Tomáš (advisor)
Bachelor’s thesis discusses the design of an adjustable DC/DC converter with an output voltage of 30 V and a current of 10 A. The first part described three basic DC/DC converter topologies and the scheme of power and control structure of the converter. As a suitable topology of power supply was selected a two-switched forward converter. The integrated circuit SG3525ADWR2G was chosen as the PWM modulator for the converter. The second part of the thesis described the design and testing of the switch mode power supply.
|
guest ::
RSS feed.