|
|
Preparation and properties of Bioglass based foam materials
Nedbalová, Radka ; Hadraba, Hynek (referee) ; Dlouhý, Ivo (advisor)
The work deals with the preparation and mechanical properties of coated Bioglass® 45S5 based foam materials with open porosity. The samples have been fabricated applying the replication method with use of polyurethane foam. Furthermore, these samples were coated in order to increase the strength characteristics and crack resistance. Polyvinylalcohol and PVA with cellulose microfibrils have been used as coating. Besides microstructural parameters of investigated materials using the SEM images strength characteristics in compression and in tension were also quantified.
|
|
|
A Tool for Checking Correctness of Design Diagrams in UML
Dlouhý, Ivo ; Bartík, Vladimír (referee) ; Rychlý, Marek (advisor)
Aim of this master's thesis is to create a tool for checking correctness of design diagrams in UML. The work describes the UML language and connected standards, defines the problem of UML correctness and explains the approach of using incorrectness pattern database to check the UML correctness. Furthermore it suggests the QVT language as a suitable for implementing the incorrectness patterns. The problem is decomposed into shared incorrectness pattern database manageable via web interface, standalone tool for use from the command line and a plugin for the UML design software Visual Paradigm. All of the components are designed, implemented, tested and evaluated. The important aspect is the openness and extensibility of the tool.
|
|
|
Determination of Fracture Mechanical Characteristics From Sub-Size Specimens
Stratil, Luděk ; Džugan, Jan (referee) ; Haušild, Petr (referee) ; Dlouhý, Ivo (advisor)
The standards of fracture toughness determination prescribe size requirements for size of test specimens. In cases of limited amount of test material miniature test specimens offer one from the possibilities of fracture toughness evaluation. Because of small loaded volumes in these specimens at the crack tip the loss of constraint occur affecting measured values of fracture toughness. In such cases the size requirements for valid fracture toughness characteristics determination are not fulfilled. These specimens can be even on limits of load range of test devices and handle manipulation by their small dimensions. The important task related to these specimens is, apart from methodology of their preparation and measurement of deformations, the interpretation of measured values of fracture toughness and their possible correction to standard test specimens. Moreover, in the upper shelf region of fracture toughness quantification and interpretation of size effects is still not resolved sufficiently. This thesis is by its aims experimentally computational study focused on evaluation of size effect on fracture toughness in the upper shelf region. The size effect was quantified by testing of miniature and large specimens’ sizes in order to determine J R curves. Two geometries of miniature test specimens, there point bend specimen and CT specimen, were used. The experimental materials were advanced steels developed for applications in nuclear and power industry, Eurofer97 steel and ODS steel MA956. Finite elements analyses of realized tests together with application of micromechanical model of ductile fracture were carried out in order to evaluate stress strain fields at the crack tip in tested specimens from Eurofer97 steel. By comparison of experimental results and numerical simulations of J R curves the mutual dependencies between geometry of specimens and element sizes at the crack tip were derived. On the basis of acquired relationships, the methodology of J R curve prediction for standard specimen size from limited amount of test material was proposed. Main contribution of thesis is description of effect of material’s fracture toughness level on resistance against ductile crack propagation in miniature specimens. For material where significant crack growth occurs after exceeding the limit values of J integral (Eurofer97), the loss of constraint is considerable and highly decreases resistance against tearing. Miniature specimens then show significantly lower J R curves in comparison with standard size specimens. This effect is the opposite to the behaviour of miniature specimens in transition region. In case of material with low toughness, in which significant crack growth occurs in the region of J integral validity (ODS MA956), the effect of constraint loss is small without large impact on resistance against tearing. In such case miniature specimens demonstrate comparable J R curves as specimens of larger sizes. Next important contribution is proposed methodology for prediction of J R curve from small amount of test material using micromechanical modeling.
|
|
|
Geopolymers Incorporating Wastes and Composites Processing
Taveri, Gianmarco ; Perná,, Ivana (referee) ; Pouchlý, Václav (referee) ; Dlouhý, Ivo (advisor)
Buildings construction and realization of public infrastructures have always been a primary need in the human society, developing low cost and user-friendly materials which also encounter safety and durability requirements. Portland cement is the most used material in construction industry from the industrial revolution up to date, but the raising concerns related to the climate change are pushing the governments worldwide to replace it with more eco-friendly and greener materials. Geopolymers are considered to be best alternatives to Portland cement in construction industry, but issues related to cost and mechanical properties are still hindering the commercialization of this material. Geopolymer incorporating wastes is one of the solutions. Fly ash, a thermal power plant by-product, and borosilicate glass, a recycled glass from pharmaceutical vials, are suitable candidates in geopolymers activation. NMR and FTIR spectroscopies demonstrated that borates from borosilicate glass are active compounds in geopolymerization, substituting the alumina is its role, composing a B-Al-Si network never observed before. Various fly ash and borosilicate glass weight contents were studied in terms of mechanical properties (compression test, 3-point bending test). It was found that fly ash 55 wt.% and borosilicate 45 wt.% composition activated in 13 M NaOH solution holds the best compressive and flexural strength (45 and 4 MPa respectively), 25% stronger than similar counterparts found in literature. Cellulose fibres in different weight contents were dispersed into the geopolymeric paste to produce geopolymer composites, with the aim to render the material more suitable for structural applications. 3-point bending test showed an improvement of the flexural strength of about 165% (12 MPa), while the chevron notch method displayed a fracture toughness of 0.7 MPam1/2, in line with the results of geopolymer composites found in literature. In this thesis work, fly ash was also successfully densified in 3 M NaOH solution and distilled water through a new method based on hydraulic pressure, called hydro-pressure sintering. This innovative technology involves a drastic reduction of NaOH utilization in geopolymerization, rendering the material more eco-friendly. XRD spectroscopy conducted on produced samples revealed a higher formation of crystals, most likely induced by the application of hydraulic pressure (450 MPa).
|
|
|
In-situ Synthesised Intermetallic Compounds in Powder Materials
Hanusová, Petra ; Novák, Pavel (referee) ; Skotnicová, Kateřina (referee) ; Dlouhý, Ivo (advisor)
The mechanical treatment of solids is one of the most common and widely used operations. The volume of solids subjected to chemical treatment is very large too. Therefore, combining these two ways into one seems to be a logical solution. This method is called the mechanochemical processing of materials. Processing materials in this way has many advantages. On the one hand, this processing is economically as well as technologically feasible. Even the materials that not react together in conventional way can be prepare in this way. The mechanochemistry/mechanochemical synthesis utilizes the mechanical energy to activate chemical reactions and structural changes. The aluminothermic reduction reactions induced by the high – energy ball milling are gaining importance because of the potential applications like the synthesis of microcrystalline and nanocrystalline in – situ metal matrix composites. The mechanical activation of the chemical reactions by high energy ball milling often changes the reaction mechanism and produces metastable materials. Changes of reaction mechanisms during mechanical alloying on four different systems were studied. The system was based on this composition: Al - B2O3 - X (X = C, Ti, Nb, Cr). The possibility of another in – situ reactions during spark plasma sintering process (SPS) was also investigated. All systems were mechanically alloyed under the same conditions. After alloying, on each system scanning electron microscopy was performed and qualitative and quantitative analysis was performed using X-ray diffraction. The indentation hardness and the indentation modulus of elasticity were evaluated using nanoindentation. All analyzes were performed after mechanical alloying as well as SPS and the results were compared to each other. Based on the results, a change of reaction mechanisms was proposed for all systems. It has been found that metal matrix composites are formed and, when chromium is used, hybrid composite material reinforced with intermetallic phase and aluminum borate has been developed.
|
|
|
Metal Matrix Composites Prepared by Powder Metallurgy Route
Moravčíková de Almeida Gouvea, Larissa ; Novák, Pavel (referee) ; Hadraba, Hynek (referee) ; Dlouhý, Ivo (advisor)
Vývoj nových materiálů pro součásti v moderních technologiích vystavené extrémním podmínkám má v současné době rostoucí význam. Děje se tak v důsledku neustále se zvyšujících požadavků průmyslových odvětví na lepší konstrukční vlastnosti nosných materiálů. Ve světle těchto faktů si tato studie klade za cíl posoudit nové složení slitin s vysokou entropií, které se vyznačují vysokým aplikačním potenciálem pro kritické aplikace. Slitiny jsou připravovány práškovou metalurgií, t.j. kombinací mechanického legování a slinování v pevné fázi. Pro účely srovnávaní vlastností jsou vybrané kompozice vyrobeny také tradičními metalurgickými metodami v roztaveném stavu, jako je vakuové indukční tavení a následné lití nebo vakuové obloukové tavení. Prášková metalurgie umožňuje postupný vývoj kompozitů s kovovou matricí (MMC) prostřednictvím přípravy oxidicky zpevněných HEA slitin. To je možné díky inherentním in-situ reakcím během procesu výroby. Když se naopak zvolí výrobní postup z taveniny, připravený kovový materiál vykazuje velké rozdíly v mikrostrukturách a souvisejících vlastnostech, v porovnání se stejným materiálem vyrobeným práškovou cestou (PM). Vyrobené práškové a tavené materiály jsou detailně charakterizovány s ohledem na komplexní vyhodnocení vlivu různých metod zpracování. Práce se zejména orientuje na mikrostrukturní charakteristiky materiálů a jejich mechanické vlastnosti, včetně vlivu tepelného zpracování na fázové transformaci a mikrostrukturní stabilitu připravených materiálů.
|
|
|
A Tool for Checking Correctness of Design Diagrams in UML
Dlouhý, Ivo ; Bartík, Vladimír (referee) ; Rychlý, Marek (advisor)
Aim of this master's thesis is to create a tool for checking correctness of design diagrams in UML. The work describes the UML language and connected standards, defines the problem of UML correctness and explains the approach of using incorrectness pattern database to check the UML correctness. Furthermore it suggests the QVT language as a suitable for implementing the incorrectness patterns. The problem is decomposed into shared incorrectness pattern database manageable via web interface, standalone tool for use from the command line and a plugin for the UML design software Visual Paradigm. All of the components are designed, implemented, tested and evaluated. The important aspect is the openness and extensibility of the tool.
|
|
|
Geopolymers Incorporating Wastes and Composites Processing
Taveri, Gianmarco ; Perná,, Ivana (referee) ; Pouchlý, Václav (referee) ; Dlouhý, Ivo (advisor)
Buildings construction and realization of public infrastructures have always been a primary need in the human society, developing low cost and user-friendly materials which also encounter safety and durability requirements. Portland cement is the most used material in construction industry from the industrial revolution up to date, but the raising concerns related to the climate change are pushing the governments worldwide to replace it with more eco-friendly and greener materials. Geopolymers are considered to be best alternatives to Portland cement in construction industry, but issues related to cost and mechanical properties are still hindering the commercialization of this material. Geopolymer incorporating wastes is one of the solutions. Fly ash, a thermal power plant by-product, and borosilicate glass, a recycled glass from pharmaceutical vials, are suitable candidates in geopolymers activation. NMR and FTIR spectroscopies demonstrated that borates from borosilicate glass are active compounds in geopolymerization, substituting the alumina is its role, composing a B-Al-Si network never observed before. Various fly ash and borosilicate glass weight contents were studied in terms of mechanical properties (compression test, 3-point bending test). It was found that fly ash 55 wt.% and borosilicate 45 wt.% composition activated in 13 M NaOH solution holds the best compressive and flexural strength (45 and 4 MPa respectively), 25% stronger than similar counterparts found in literature. Cellulose fibres in different weight contents were dispersed into the geopolymeric paste to produce geopolymer composites, with the aim to render the material more suitable for structural applications. 3-point bending test showed an improvement of the flexural strength of about 165% (12 MPa), while the chevron notch method displayed a fracture toughness of 0.7 MPam1/2, in line with the results of geopolymer composites found in literature. In this thesis work, fly ash was also successfully densified in 3 M NaOH solution and distilled water through a new method based on hydraulic pressure, called hydro-pressure sintering. This innovative technology involves a drastic reduction of NaOH utilization in geopolymerization, rendering the material more eco-friendly. XRD spectroscopy conducted on produced samples revealed a higher formation of crystals, most likely induced by the application of hydraulic pressure (450 MPa).
|
|
|
Microstructure and properties of YSZ thermal barier coatings deposited onto CoNiCrAlY bond coats remelted by electron beam
Slavíková, Barbora ; Jan, Vít (referee) ; Dlouhý, Ivo (advisor)
The master thesis is dealing with characterization of the structure and properties of the YSZ thermal barrier coating deposited by water hybrid plasma spray technology on the CoNiCrAlY bond coats modified by using electron beam and vacuum annealing. Deposition of the bond coats was performed via high velocity oxy-fuel technology and cold spray. In case of experimental evaluation, the microstructure and chemical composition of the ceramic top coat deposited with powder and suspension feedstock was analyzed. The same analysis procedure was used also for bond coats after electron beam remelting by using two sets of parameters. Furthermore, the changes in microstructure and chemical composition of the remelted and annealed bond coats was evaluated. Eventually, the micromechanical properties of the top coats and the bond coats were measured. The ceramic top coats deposited with powder feedstock exhibited the structure composed by splats, while the top coats deposited in form of suspension showed fine structure with columnar grains. The dendritic structure was observed on remelted bond coats. The annealing process had an influence on the structure in form of coarsened phases and the chemical composition was changed due to diffusion of the elements.
|
|
|
NEW APPROACH TO STRESS-STRAIN CURVE PREDICTION USING BALL INDENTATION TEST
Brumek, J. ; Strnadel, B. ; Dlouhý, Ivo
This work is concerned with the method for predicting stress-strain behavior of material using instrumented indentation technique. High strength low alloy steel with different thermal treatment was taken into the analysis. Heat treatment for the steel was performed to obtain different mechanical properties. Assessment of mechanical properties was done by using inverse technique of the finite element analysis. The results were confronted with conventional test parameters and prediction procedure defined such Automated Ball Indentation Technique (ABIT). Comparison of the material curves shows good agreement with tensile test properties which makes this non-destructive method suitable for industrial application.
|
guest ::
RSS feed.