|
|
Reliability assessment of a hydraulic switchboard production proces
Machová, Lenka ; Maradová, Karla (referee) ; Blecha, Petr (advisor)
The Diploma thesis is focused on possibilities of an assessment of a hydraulic switchboard and its manufacturing process. Furthermore, it analyses methods individually which are suitable for quality assurance and production reliability, which are described in details. The follow-up work focuses more on the Statistical Process Control (SPC) method which is applicable in the early warning system and the Failure mode, effects, and criticality analysis (FMECA) method, applicable in the planning system. These two methods are further applied to the newly introduced process of machining the hydraulic switchboard as an effective tool not only for assessing the reliability of production, but also for its subsequent securing and maintaining in a relevant condition.
|
|
|
Design of a upright drilling machine
Matoušek, Kamil ; Bilík, Martin (referee) ; Blecha, Petr (advisor)
The subject of this thesis is to propose a design of an upright drilling machine. The upright drilling machine is described in the first part. Research about machines available on the market nowadays is accomplished in the second part of the thesis. Based on this research the parameters of machine are selected in the final part and proposal of the engineering design of an upright drilling machine. Basic construction calculations are made too. The result of this thesis is an assembly drawing and a 3D model of an upright drilling machine.
|
|
|
Workpiece geometrical accuracy measurement possibilities
Tvardek, Michal ; Musil, Martin (referee) ; Blecha, Petr (advisor)
The aim of this bachelor thesis is to do a research in the field of measurement of geometrical accuracy of workpiece. In the introduction I deal with the description and graphic interpretation of geometrical tolerances and parameters of the surface texture, including their illustration in the drawing documentation. Then I briefly summarized the major measuring methods of the chosen geometrical features and gear wheels. I also described the current equipment for measuring geometrical accuracy and surface texture for both inprocess and postprocess usage; meanwhile I tried to accentuate their main features and advantages.
|
|
|
Description of outside grinding machines
Brychta, Tomáš ; Opl, Miroslav (referee) ; Blecha, Petr (advisor)
In this bachelor’s thesis is completioned background research and outside grinding machines description.In the introduction of this thesis are shown the aims which will be reached while elaborating. This thesis includes general introduction about grinding, where is mentioned definition of the grinding, description and grit distribution on grinder, parametres of grinders, reached geometric accuracy, reached surface roughness, cross section of cuttings, definition of the main and alternate movement and cutting conditions on the tool and on the workpiece at grinding.Furthermore general partition of grinding machines types, view and the parting of the grinding machines producers, with the references to their web sites and with data about country of origin for each of these producers. After it the thesis focus only on outside grinding machines and in their division. In centre grinding machines is shown their division and characterictics, ways of grinding and description of each way and there are shown producers of centre grinding machines with concrete tips of machines too. In each of this machine are shown its preferences and engineering characteristic. In profile grinding machines is shown its characteristic, producers of profile grinding machines and tips of these machines. In surface grinding machines is shown characteristic of surface grinding, the partition of the surface grinding machines, ways of grinding and description each way, producers of these grinding machines and tips of separate machine with its preferences and engineering characteristic. The last type of the outside grinding machines are centreless grinding machines. There is shown characteristic of centreless grinding, ways of grinding and the description each of the way, producers of centreless grinding machines and tips of these machines with its description and engineering characteristic. By the centreless grinding are shown even the ways of double disk grinding with the examples of utilization this grinding. The work is ended by finish, where is shown overall assessment in the way of grinding machines development, resources and innovations, which the producers using to increasing precision of the machines.
|
|
|
Design of grinding spindl
Slavíček, Josef ; Jaroš, Zdeněk (referee) ; Blecha, Petr (advisor)
The subject of this bachelor thesis is the construction of grinding machine spindle. The work is divided into two main parts. The first part is engaged with the general description of the spindles, their design components, the accuracy requirements and modern trends in the spindles. The second part is engaged with the design calculations of selected grinding spindle. The conclusion of this work is drawing and 3D model of that selected spindle, is created by using Autodesk Inventor 10.
|
|
| |
|
|
Design of turning machine C axe
Jeník, Jan ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The subject of this thesis is the construction of turning machine C axis. The first part of this work includes a search of possible methods of construction drive C axis. The second part includes a choice of drive parameters, conceptual proposals for possible solutions and selecting the most appropriate variant. Also included is a 3D model of the lathe spindle with the C axis, modeled in SolidWorks 2007 and assembly drawing of spindle with C axis.
|
|
|
Analysis of the thermal load of the workpiece during the cutting grinding of high-strength bearing rings
Felgentreu, Sven ; Blecha, Petr (advisor)
Práce se zabývá tepelným namáháním valivých ložisek s vysokou pevností, které jsou řezány pomocí brusného kotouče. Při lineárním způsobu řezání brousícím kotoučem značně vzrůstá teplota podél střižnice. Takto vzniklé teplo se hromadí v malém průřezu materiálu a dochází k tepelnému ovlivnění okolí místa řezu. Cíl této práce spočívá v navržení dvouosého řezání kotoučem za účelem snížit tepelné poškození materiálu. Nejdříve byl teoreticky posouzen současný postup řezání a na základě toho navržena dvouosá řezací strategie, která byla poté experimentálně ověřena. Použitím dvouosé strategie je možné dosáhnout významné redukce nárůstu teploty ve střižné ploše tak, že materiál není tepelně poškozen a současně nevzniká otřep. Nicméně, dvouosý způsob řezání vede ke zvýšení doby procesu, jenž je tedy nutné dále optimalizovat.
|
|
| |
|
|
Description of drilling machines
Bradáč, Tomáš ; Michalíček, Michal (referee) ; Blecha, Petr (advisor)
One part of this thesis concerns with recherche of drilling machines and in the other is made a description and a division of drilling machines of current production. This thesis describes suitability for use of those machines and the characteristics of individual types of machines. Chosen Czech and foreign manufacturer is listed by every type of machine together with one representative of given type. Given representative is pictured and a short characteristic is present together with basic technical parameters.
|
guest ::
