|
| |
|
|
Exhibition Gallery
Bednářová, Bronislava ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
This master´s thesis is deal with design of steel structure of exhibition gallery. Layout od building is three-arm star, where each arm is rectangular with dimensions 6 x 18 m and arm has two floors. All three arms are connected to the hexagonal prism (space frame), which is on the second floor walkway and covered skylight. Maximum building height is 11.28 meters from the finished grade. The main structure of building is created by twelve frame in cross direction. The roof is flat. The surface of facade is glass created by aluminium structure.
|
|
|
Risk analysis and treatment of the technological process
Vengřínová, Hana ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This diploma thesis deal with analysis and evaluation risks of the technological process of bored piles. Risks are divided into divisions of quality, environmental and safety. Subsequently conducted a risk analysis. The risk assessment was made by following methods - Risk Matrix, FMEA (Analysis Failure Modes and Effects) and Pareto chart. With the help of these methods are assessed identified risks and proposed appropriate measures for risk retention.
|
|
|
Risk analysis and management of technological stages of construction
Sáček, Petr ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis deals with the analysis and evaluation of quality, environmental, and security risks, hazards and application of appropriate methodology to a particular construction project. For an application is selected the key construction technology - walling. Diploma thesis establishes a framework for risk management on the basis of established integrated management system (IMS) defines the objectives and mechanisms in controlling adherence to standards, evaluation of business risks, defining risk management strategies, the draft risk management procedures, monitoring their functioning, assessing their performance and any improvement and support the process of supplying the required information.
|
|
|
Analysis and risk assessment of construction technologies of structures in an integrated management system
Komárková, Jana ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis deals with the analysis and evaluation of quality, environmental and safety risks and the application of appropriate methodologies to concrete construction work. For application are selected key construction technologies, which are classified according to the Classification of building structures and works (TSKP) in Chapter main building production (HSV). From ČSN EN 31010 Risk management – Risk assessment techniques were selected for work tools - Causes and effect analysis, Failure Modes and Effects Analysis (FMEA), Pareto diagram, Bow tie analysis. The aim of this thesis is to analyze and assess the quality, environmental and safety risks of selected construction technologies and conditions established an integrated management system to handle simple tools for the management andelimination.
|
|
|
Risk analysis and management technology phases roofs of buildings
Mík, Petr ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This master thesis deals with analysis and evaluation of quality, environmental and safety risks linked with two roof cover types. Malfunction analysis was carried out on the most risky roof cover component. Afterwards risk analysis was done according to ČSN EN 31010:2011 Risk management – Risk assessing techniques regulation. Following methods were chosen for risk assessment - Failure Mode and Effects Analysis (FMEA), RIPRAN method, cause-and-effect analysis (Ishikawa diagram) and Pareto chart. Using aforementioned methods, risks were identified and evaluated. Countermeasures for identified risks were suggested in conclusion.
|
|
|
Risk analysis and evaluation of sources of public water supply
Novotná, Aneta ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
The thesis is focused on the identification, quantification and assessment of risks in the supply of drinking water, the application of appropriate methods for specific public water supply, the environment and operation. WaterRisk method based on EN 31010 Risk Management - Techniques of risk assessment methods are chosen - analysis of possible defects and their consequences (FMEA), Pareto diagram and Ishikawa diagram. The aim of the thesis is analyze and assess the quality, environmental and safety risks to the public water supply system and use tools for their management and elimination. The results will be compared and evaluated the advantages and disadvantages of each analysis.
|
|
|
Revision of an integrated management system with regard to the risk management methods
Šubrtová, Michaela ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
The subject of my thesis is to undertake a comprehensive analysis of the current status of the company. In the thesis the economic and risk analysis. For economic analysis is used SWOT analysis, Porter's five forces and PEST analysis. From risk analysis, I selected a fault tree analysis FTA and trouble-free assessment of human activities HRA. FTA is used to identify the possible causes of risk and calculate the probability that an unfavorable risk occurs. HRA analysis is used to evaluate the effects of human error on the system. Based on these analyzes identified shortcomings and to suggest effective improvements for the company.
|
|
| |
|
|
Risk management in the testing laboratory
Virágová, Tereza ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis is dealing with analyzing risks in an accredited testing labotarory. In this thesis will be made a search of available manuals and literature issued for accredited testing laboratory. In this thesis will be conducted selected analyzes for selected processes. The aim of this thesis is to analyze and asses the risks in chosen processes of testing laboratory and make a a simple tools for the management and elimination.
|
guest ::
RSS feed.