National Repository of Grey Literature 54 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Human resources in healthcare in the Czech Republic
Matoušek, Pavel ; Kocianová, Renata (advisor) ; Adam, Pavel (referee)
Subject of this diploma work is focused on human resources in heatlhcare systém in The Czcech Republic. It includes description of system's background which influences healthcare human resource management. Then the framework of healtcare workforce is described. After that individual aspects in healthcare human resource management are dealt. Following chapters enlarge healthcare human resource planning, recruitment and selection, employee relations, safety and health security in healtcare, motivation and performance, compensation and education and develompment of healthcare labourforce.
Characterization of ultra-thin polymer films on solid substrates using different physical techniques
Pop-Georgievski, Ognen ; Rypáček, František (advisor) ; Adam, Pavel (referee) ; Werner, Carsten (referee)
The presented doctoral research was aimed at preparation and characterization of ultra thin polymer films on solid substrates using different physical techniques. Each of these physical techniques probes selectively different characteristics of the films. While some of the techniques are strong in the predetermination of some unique properties of the layers, they might be limited and give no specific/conclusive information about some other important characteristics. Therefore, only the combination of the techniques provides a profound picture of the thickness, architecture, composition and functionality of the films/layers. This combined characterization approach elucidates in details the physical characteristics and the mechanisms responsible for the unique behavior of different polymer films/layers in the application that they are intended for. In the thesis, of particular interest were films of high biomedical, biotechnological and tissue engineering importance, such as: 1. poly(lactide) films formed by grafting "from-" a silanized alacrite thin films (L605 Co-based super alloy), 2. polydopamine (PDA) films that could serve as substrate independent mod- ification platform for further surface modification steps, 3. poly(ethylene oxide)films formed by "grafting to-" PDA modified surfaces, 4....
Biological behaviour of beta2-microglobulin in liquor in clinically defined nosological units
Svatoňová, Jana ; Adam, Pavel (advisor) ; Matěj, Radoslav (referee) ; Zvěřina, Eduard (referee)
MUDr. Jana Svatoňová Autoreport for Dissertation Work Biological behaviour of beta2-microglobulin in liquor in clinically defined nosological units 1 Charles University in Prague 1st Faculty of Medicine Autoreport for Dissertation Work BIOLOGICAL BEHAVIOUR OF BETA2-MICROGLOBULIN IN LIQUOR IN CLINICALLY DEFINED NOSOLOGICAL UNITS MUDr. Jana Svatoňová 2014 MUDr. Jana Svatoňová Autoreport for Dissertation Work Biological behaviour of beta2-microglobulin in liquor in clinically defined nosological units 2 Contents Contents ............................................................................................... 2 1. Introduction .................................................................................. 3 2. Objective of this work .................................................................... 8 3. Material and methodology .............................................................. 9 4. Results .........................................................................................10 5. Discussion....................................................................................11 6. Conclusion ...................................................................................12 7. Literature: ....................................................................................12 8. The...
Optimization of the ways of hot water preparation in sports halls
Dvořáková, Simona ; Formánek, Marian (referee) ; Adam, Pavel (advisor)
The topic of this diploma thesis is to design the space and water heating system for a sport hall. The diploma thesis is divided into three chapters. The first chapter analyzes existing literature with a focus on heat transfer, pipe thermal insulation, hot water source, and existing normative and legislative requirements regarding hot water preparation. The second chapter consists of various calculations that regard the design of radiators, branch dimensioning, and design of water heating system for the target object. Additionally, this chapter contains an elaboration of a design documentation, which Detail Design Documentation. The third chapter focuses on an experimental water heating for the target object with a comparison of a centralized and decentralized water heating system.
Simulation of thermally activated foundation structures of buildings
Sliva, Matěj ; Adam, Pavel (referee) ; Šikula, Ondřej (advisor)
Diploma thesis deals with geothermal foundations. The aim of the thesis is to find optimal way of pipe winding for heat-carrying liquid in foundation piles. The problem is solved by CFD simulations in ANSYS Fluent. Determinative parameters like the pressure loss, heat fluxes and U-value in one pile circuit with two ways of pipe installations – Single coil, where reverse pipe is led in the middle of pile and Duplex Coil with reverse pipe in spiral shape are observed.
Heating of nursery school building
Nečas, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The bachelor's thesis deals with the design of a kindergarten heating. The theoretical part presents the heat pumps. The calculation part describes a specific design of heating for kindergarten for 54 children by a low-temperature system with a combination of underfloor heating and radiators, a proposal for the preparation of hot water and other necessary equipment of the system. A system of two air-to-water heat pumps is designed as a heat source. Forced ventilation is provided by an air handling unit. The building is designed as a building with almost zero energy consumption
Heating of office building
Němečková, Radka ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor thesis is design of heating and warm waterpreparing in the office building. The building has two overground floors. A source of the heat for the building is a gasboilerroom with two condensation boilers. Heating surfaces are panel radiators and free standing convectors. There is forced ventilation installed in whole building.
Ventilation and cooling of an office building
Čtvrtečka, Václav ; Adam, Pavel (referee) ; Šikula, Ondřej (advisor)
My bachelor thesis deals with a complex proposal of forced ventilation and cooling of an office building. The aim of the work is to provide a quality and functional system of ventilation and cooling equipment to ensure optimal microclimate inside the building. The theoretical part deals with cooling systems and their use in detail.
Energy optimization of the administrative building
Černý, Tomáš ; Horák, Petr (referee) ; Adam, Pavel (advisor)
The diploma thesis deals with the energy audit of administrative building. In the theoretical part I described the heat pumps. In a calculated part I proposed austerity measures and created of them saving variant. I chose the most suitable variant and assess it from an economic and ecological point of view. In the third part, I use the calculation program to optimize the building.
Operational efficiency of boilers
Doležal, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.

National Repository of Grey Literature : 54 records found   1 - 10nextend  jump to record:
See also: similar author names
4 Adam, Petr
Interested in being notified about new results for this query?
Subscribe to the RSS feed.