|
|
Conducting connections of ceramic with FR4 in 3D structure
Pelc, Miroslav ; Adámek, Martin (referee) ; Kosina, Petr (advisor)
This work deals with conductive connections ceramic substrate with FR4 into three – dimensional structure. High frequency amplifier was created on ceramic substrate as a concrete application, for check quality substrate on resulting behavior circuit. The supply voltage for this amplifier is provided by the DC voltage source developed for FR4. Further the thesis deals with quality verification of substances conductive connection and individual aspects, with affect resulting reliability of connection.
|
|
|
The design of electrochemical sensor with integrated potentiostat chip
Uhlár, Martin ; Novotný, Marek (referee) ; Adámek, Martin (advisor)
The research on electrochemical sensor applications in combination with application-defined electronic circuits is a very fast developing field of modern sensorics. Device designing of unique integrated systems with specific properties and parameters is now becoming the everyday practice for producers of devices based on the latest technology progress in microelectronics. In the process of realization of a new device type, the main objective consists in increasing the possibility of detecting very low concentrations of heavy metals in the given chemical solution, extending the signal-to-noise ratio, and measuring the potential of a sensor. The general aim of this Master’s thesis is to design the topology of a sensor based on the thick film technology, to materialize the sensor, and to make experimental measurement using the sensor prototype. The practical reason for basing the measurement on the application of this thick film sensor is to find out whether the operational integration of the sensor and the circuit has been achieved according to the original hypothesis. Importantly, it is also necessary to determine whether the reproducibility of measured results has been reached. The innovative aspect of the created device consists in the improvement of output characteristics given by the integration of ASIC (IMAM CHIP). The integration of ASIC on the surface of the sensor eliminates the huge parasitic influence that affects the accuracy of measurement.
|
|
| |
|
|
The focus control unit for the optical microscope
Flek, Petr ; Řezníček, Michal (referee) ; Adámek, Martin (advisor)
The aim of bachelor thesis was to focus on the issue of creating photos with great depth of field, which are developed on an electronically controlled optical microscope with photographic equipment. Arduino module with a series ATMega (Atmel Corporation) microcontroller, that was selected for management control device has been described in detail in the next section. Work includes the design and implementation of the control unit, which automates the process of capturing digital images from the microscope. The control unit contains a module Arduino with ATmega328 processor, which controls the stepper motor connected to focus of the JENAVERT microscope (Carl Zeiss). Device communicates with the user by buttons and LCD display.
|
|
|
Wetting of lead-free solders on ceramic substrates
Lipavský, Lubomír ; Otáhal, Alexandr (referee) ; Adámek, Martin (advisor)
This master's thesis deals with issue of lead-free soldering in protective atmosphere with focus on wetting test. Theorethical part is focused on the types of lead-free solders, wettability tests performed on solder joints, different types of soldering or comparison of influence of the base material in regards to the wetting of the solder. The goal of practical part is testing and comparison of spreadability of selected lead-free solder on two conductive surfaces with different concentration of oxygen in protective nitrogen atmosphere. Testing has been performed on ceramic substrate which differs this method from others, performed on organic substrate. For an over-melted solder, the crystal-growth on surface in regards to protective atmosphere concentration is shown.
|
|
|
Audio preamplifier with input selector
Starčok, Tomáš ; Adámek, Martin (referee) ; Šandera, Josef (advisor)
This thesis deal with the audio preamplifier with input selector. It describes all designed parts of this device. It selects and describes all suitable components. Describes the whole process of electronics design in this device. Then describes the design, manufacture, assembling and testing of the PCB. In conclusion it shows the achieved results and electrical parameters of the device.
|
|
| |
|
|
The strength of soldered joints on ceramic substrates
Jansa, Vojtěch ; Nicák, Michal (referee) ; Adámek, Martin (advisor)
This thesis deals with problematic of lead – free soldering and consequent testing of mechanical characteristics of solder joints. The theoretical part is focused on various types of lead – free solders, influence of protective atmosphere on the solders characteristics and mechanical testing of solder joints. Basic materials and thick - films making technology is mentioned. Practical part contains a design of topology that was used for mechanical strength testing of solder joints connecting SMD component and ceramic substrate. Properties of lead – free solder pastes was investigated on various concentrations of O2 and compared with lead soldering paste.
|
|
|
The remote-control workplace of sensor technology
Knopp, Daniel ; Vaško, Cyril (referee) ; Adámek, Martin (advisor)
This thesis is focused on a specific virtual laboratory support, which is designed and created as a device capable of data transferring to display and/or computational unit via serial port. Both the device and common PC are generally a corner stone of each virtual laboratory, which can be also accessed via internet. Technique, significant factors with impact of analog disturbances on digital communication and realization of standalone virtual laboratory are described in detail.
|
|
|
The remote control workplace of electrochemical sensors
Cieslar, Jakub ; Šteffan, Pavel (referee) ; Adámek, Martin (advisor)
This master’s thesis deals with the design of automated workplase for measurement with electrochemical sensors. Design and realization of a device, which communicates with computer and which can be controlled via WAN or LAN nets, are the main aims of this work. This thesis describes the process of designing, realization and optimalization of designed preparation adjustment. It also describes created software of a device, driver for service PC and programme of a web client.
|
guest ::
RSS feed.