National Repository of Grey Literature 8 records found  Search took 0.01 seconds. 
Influence of the mineralogical composition of raw material on phases formed during the burning of hydraulic lime and natural cement
Kozlovcev, Petr ; Přikryl, Richard (advisor) ; Hladil, Jindřich (referee) ; Škvára, František (referee)
Natural hydraulic lime and natural cement have been used in the building industry for centuries. These inorganic hydraulic binders are called "traditional" or "alternative" because they can, in some cases, substitute modern Portland cement. The recent increased interest in these binders is due not only to their use in restoration practices, but also because their production and use is less energetically demanding than in modern cements. Historically, many types of hydraulic binders were produced in the regions of Bohemia and Moravia. However, much information has been lost about their manufacturing process, which raw materials were used, and we are uncertain of the exact character and properties of the burned material. To date, studies have only addressed the impact of the chemical composition of raw material on the parameters of the burned material - all this is well known for Portland cement, much less for other types of hydraulic binders. The aim of this dissertation was to study the various types of raw materials (limestone containing non- carbon admixtures) and to understand the characteristics of their respective hydraulic lime and natural cement. This was done by analyzing the impact of conditions (highest achieved burning temperature and time of burning) and the mineral and chemical...
Influence of the mineralogical composition of raw material on phases formed during the burning of hydraulic lime and natural cement
Kozlovcev, Petr ; Přikryl, Richard (advisor) ; Hladil, Jindřich (referee) ; Škvára, František (referee)
Natural hydraulic lime and natural cement have been used in the building industry for centuries. These inorganic hydraulic binders are called "traditional" or "alternative" because they can, in some cases, substitute modern Portland cement. The recent increased interest in these binders is due not only to their use in restoration practices, but also because their production and use is less energetically demanding than in modern cements. Historically, many types of hydraulic binders were produced in the regions of Bohemia and Moravia. However, much information has been lost about their manufacturing process, which raw materials were used, and we are uncertain of the exact character and properties of the burned material. To date, studies have only addressed the impact of the chemical composition of raw material on the parameters of the burned material - all this is well known for Portland cement, much less for other types of hydraulic binders. The aim of this dissertation was to study the various types of raw materials (limestone containing non- carbon admixtures) and to understand the characteristics of their respective hydraulic lime and natural cement. This was done by analyzing the impact of conditions (highest achieved burning temperature and time of burning) and the mineral and chemical...
Development of phase composition in silicate systems by available methods and their optimalization
Opravilová, Lenka ; Palou, Martin (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
One of the most prominent measurable parameters of the development of phases and phase transformations in inorganic systems are undoubtedly the volume changes of silicate matrix. The study of volume changes is crucial in the terms of usable durability of final product. They represent shrinkage or expansion of the material and may lead to significant decrease of technological and ecological parameters and often to complete destruction of these materials. Most often the volume changes can be observed when cement is used as a binder and in concretes, mortars, artificial aggregates and other similar materials. There are many methods to detect, define and determine the volume changes qualitatively or quantitatively. The development of phases was investigated as a part of the dissertation thesis and hence the volume changes were observed under the conditions closest to the real state in the construction industry. The raw materials and admixtures were selected which model the content of hazardous components present in conventional materials (both natural and secondary), used in construction and the relationship with volume changes was searched and demonstrated. The contacts for measuring the volume changes were attached to test surfaces of specimens and the physical - mechanical tests (volume changes, phase changes, strength, etc.), chemical analysis and ecotoxicity tests depending on the length of hydration were performed.
Inhibition of Hazardous Compounds in Alumino-Silicate Systems
Koplík, Jan ; Škvára, František (referee) ; Rovnaníková, Pavla (referee) ; Havlica, Jaromír (advisor)
The ability of alumino-silicate systems to immobilize hazardous compounds has been investigated since 1990s. The aim of this work is to develope alumino-silicate system (matrix) based on industrial waste products with ability to immobilize hazardous compounds (heavy metals). This ability of the matrix was confirmed by leaching tests based on the law 294/2005 Sb. Concentration of heavy metals in leachates was determined by ICP-MS method. Alumino-silicate system prepared in this work consists of high-temperature fly ash and blast furnace slag activated by mixture of alkaline activators (hydroxide and water glass). Matrixes were characterized by suitable analytic methods (XRD, SEM, FT-IR, DTA-TGA-EGA). The same analytic methods were used to describe the mechanism of immobilization of selected elements (Ba, Cu, Pb) in prepared systems.
Synthesis of Aluminosilicate Systems Based on Alkali Activation of Industrial By-Products
Kalina, Lukáš ; Rovnaníková, Pavla (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
Portland cement-based products are the most commonly used building materials. However, it is well known that the production of OPC not only consumes a significant amount of natural resources and energy but also releases high quantity of carbon dioxide (CO2) to the atmosphere. Purpose of this work is to develop new cementitious material similar to Portland cement-based concrete, which is convenient in terms of energy and is environmental-friendly at once. This work presents preparation, composition and properties of inorganic aluminosilicate polymer, called geopolymer, synthesized from blast furnace slag and fly ash, activated by sodium hydroxide and cement kiln dust. Study of the microstructure was based on SEM-EDX-WDX, TG-DTA-EGA and XRD analysis.
Preparation and Properties of Roman Cement
Opravil, Tomáš ; Palou, Martin (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
The Ph.D. thesis deals with the preparation of highly hydraulic binders based on roman cement. Roman cement (natural cement) is recently not available on the market due to uneconomic production of such a specific binder. On the other hand there is a big lack of information on this hydraulic binder. These results in failure in meeting the basic principle of modern approaches to restoration of historical buildings or monuments made of such kind of materials, which is such, that the materials used for restoration should be compatible with original material. Recognition of the processes of roman cement preparation based on progressive methods of study can provide substantial information for more efficient raw material selection or even for nontraditional utilization, for example for artworks. This work hence is aimed at studying and selection of traditional natural as well as nontraditional raw materials such as clay. This work also studies the preparation of highly hydraulic binders based on roman cement and the kinetics of burning and hydration processes
Relation between Preparation Parameters of Belite Cement and its Hydraulic Properties
Staněk, Theodor ; Palou, Martin (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
The dissertation thesis is devoted to the study of belite clinkers and to the possibilities of the increase in their hydraulic activity. The mechanism and the kinetics of belite clinker formation were studied together with the relation of the velocity of these processes and the hydraulic activity of clinker. The influence of various parameters (degree of lime saturation, duration and temperature of burning) of the belite clinker preparation on the belite clinker development in time, on belite polymorphism, on the chemical composition of belite crystals and on the belite cement hydraulic activity was studied, too. The research methods used for the investigation involved electron microscopy, optical microscopy, X-ray diffraction analysis, high-temperature microphotometry and calorimetry. The resulting clinkers were hydraulically activated by addition of calcium sulfate. The experiments have proven that the higher rate of belite formation does not lead to the increase of its hydraulic activity, as opposed to that of alite. On the other hand, the chemical activation by sulfate anions enables to prepare clinker with relatively higher degree of lime saturation with minor admixture of alite and anhydrite, which is hydraulically activated. The work was concluded by experimental burning of belite clinker doped with sulfate anions in a model rotary kiln and by the preparation of cements blended with common industrial alite clinker. The results indicate the possibility of separate industrial production of special belite clinker alongside with common alite clinker and the production of economically and environmentally beneficial blended Portland cements with suitable technological parameters, or targeted production of special cements with properties corresponding to their required utilization.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.