|
|
Design of end effector for handling with glass stopper
Hrnko, Lukáš ; Tůma, Jiří (referee) ; Synek, Miloš (advisor)
The diploma thesis deals with the structural design of the end effector for handling with the glass stopper of the hydrogen reactor of high temperature semiconductor diffusion furnace. The work includes the summary of information about semiconductor diffusion furnace, the choice of the appropriate industrial robot, the design of the end effector structural solution, the design of its supporting structure, the power and strength calculation, the design of the end effector control and economic evaluation of its production. The 3D model together with 2D production documentation which contains the assembly drawing of the individual parts of end effector was created on the basis of the end effector design.
|
|
|
Plastic Injection Moulding Machine
Ličko, Ľubomír ; Synek, Miloš (referee) ; Pavlík, Jan (advisor)
This thesis is focused on design of equipment for injection molding. The work discusses current state of technology for injection molding. In the work is conducted structural design of horizontal injection press for plastics processing with horizontal closing movement. Injection molding machine is designed to form the parting plane of maximum dimension 350 x 350 mm.
|
|
| |
|
|
Design of vibrating waste sorter
Taska, Abraham ; Tůma, Zdeněk (referee) ; Synek, Miloš (advisor)
The master thesis deals with a construction proposal for a vibrating sorter of cartridges. The thesis contains the theoretical part characterizing various sorter types of cartridges and describes the principle of sorting with the help of the vibrating sorters. The practical part includes a draft of a drive, calculation of a vibrating sorter, a proposal of compression springs bearing vibration frame and a control calculation of these springs. A complete vibrating sorter of the cartridges is created in a 3D modeling program. The thesis is attached by the drawings of the individual assemblies, subassemblies and individual parts.
|
|
| |
|
|
Suggestion of tumbling machine's construction
Coufal, Martin ; Pavlík, Jan (referee) ; Synek, Miloš (advisor)
The thesis is in the first part focuses on the description of the technology and tumbling overview of the applications in which it is possible to use this technology. This topic is the description tumbling wet using ceramic beads. In the third part of this work is performed a brief overview of the types of tumbling machines. The following is a list of their own design variant tumbling machine with a choice of optimal design variants. Then follows the design of the tumbling machines, followed by an overview of the calculations. In the last part of this work are the technical parameters of the designed tools, including a description of its operation and maintenance.
|
|
|
Mechanical maintenance of rotating electrical machines
Smejkal, Pavel ; Synek, Miloš (referee) ; Pavlík, Josef (advisor)
This thesis deals with the mechanical maintenance of rotating electrical machines. It outlines the basic division of maintenance and its effects on the function and cost efficiency due to the type of maintenance. Main emphasis is placed on individual maintenance steps, which is done on the rotating electrical machines and then to determine their importance in relation to the causes of failures.
|
|
|
Electromechanical drive systems in machine tools
Knobloch, Josef ; Synek, Miloš (referee) ; Blecha, Petr (advisor)
This bachelor thesis deals with a description of electromechanical drive system components. The electromechanical system construct is defined in the introduction part. Motors, transmissions, shaft coupling types in use as well as the ball screw types in use are individually described in the next part of the thesis. Manufacturer representatives on Czech market are stated for each of the parts. An example of electromechanical drive system calculation is included in the last part of the thesis.
|
|
|
Suggestion of case feeder for orientation intermediate product
Hanuska, Ján ; Holub, Michal (referee) ; Synek, Miloš (advisor)
The main subject of this bachelor´s thesis is to design case feeder for orientation of intermediate product. The first part deals with actual possibilities for feeding and orientation of different intermediate products. The second part focuses on various construction variants of case feeder, their analysis and choice of optimal solution. Construction design of chosen solution is elaborated in the third part and in the last part there is an economical analysis of chosen solution.
|
|
|
Design of printed circuit boring machine
Vondrák, Pavel ; Synek, Miloš (referee) ; Blecha, Radim (advisor)
The aim of this bachelor thesis is to show possible constructional solution of CNC boring machine. The design describes construction of frame, linear motion system and feedworks. Then are chosen suitable motors, their operating and machine spindle. In conslusion is made costing of final price of described boring machine. The part of the thesis is also a design documentation.
|
guest ::
