|
|
Family house in Nové Město na Moravě
Pohanková, Martina ; Spáčilová, Jitka (referee) ; Sukopová, Dáša (advisor)
The project solves a new family house in Nové Město na Moravě. This thesis aims to develop project documentation for building construction. The new family house is designed for a family of four to six members. Garage is included in the house. There are 2 above-ground floors and a basement. The house is brick-built from THERM-type ceramic blocks with a shed roof and a saddle roof. The object is situated on a sloping terrain.
|
|
|
Apartment building in Moravany near Brno
Kraus, Martin ; Juránek, Robert (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor theses is the design of a multi-storey apartment building with underground in Moravany u Brna. The apartment building is designed for family housing and consists of nine dwelling units. The main entrance of the building is oriented to the north. The apartment building has an ractangle floor plan and covered by a flat roof. The occupiable rooms are oriented to the south. The above-ground floor is made of clay blocks and the basement is made of concrete blocks. The horizontal structure consists of část-in-place reinforced concrete floor. The project was designed in the educational version of software AutoCAD. This work emphasizes layout design, architectural design, static requirements and structural safety requirements.
|
|
|
Multifunctional Building
Fux, Ondřej ; Hrdličková, Eliška (referee) ; Sukopová, Dáša (advisor)
This thesis describes the design of a multifunctional three-storey house. The proposal includes the choice of the structural system, the choice of walls, windows, designing footings, staircases, numerous parking areas, flat roof drainage, management of rainwater. The specialized section is designed ventilating buildings with VRF systems heating / cooling with heat pumping. A check is a calculation of bearing capacity of ceiling construction.
|
|
|
Apartment building
Zlámal, Ondřej ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
The aim of this bachelor’s work is to compose a project documentation for the constrution building of apartment building. The object is situated on the cadastral area of Fulnek, number of builing plot is 1680. Building plot is located next to a fully built-up area. Terain is slightly sloping. There are 3 above-ground floors and 1 below-ground floor in the apartment building. Storage spaces, private spaces and technical spaces are situated in the below-ground floor. Flats are situated in the 3 above-ground floors. Structural system of this building is the wall system. External walls are composed of vertically performed POROTHERM blocks. Ceiling structure is designed as a cast-in-place two way reinforced slab. Similarly, staircase and a lift shaft are also designed as cast-in-place reinforced contstruction. Roofing of the object is composed as a flat roof. Floor constructions are designed as a floating floor.
|
|
|
Family house with a design office in Planá
Školník, Miroslav ; Jurka, Jiří (referee) ; Sukopová, Dáša (advisor)
This thesis describes the design of a family house with a design office in Planá. The house is designed as a brick building from Ytong, the underlying structure of concrete. The main part of the building used for housing has two floors, side part for the design office is one floor. Both parts are covered by a shed roof. The house is designed for four-to five-member family. Garage is embedded in the main building.
|
|
|
Apartment building, Brandýs nad Labem-Stará Boleslav
Králík, Martin ; Osička, Jan (referee) ; Sukopová, Dáša (advisor)
The subject of the bachelor thesis is the documentation for the construction of a residential building in Brandýs nad Labem - Stará Boleslav. The apartment building will be located in a quiet zone of a two-storey building in a future residential development. Residential building is detached. It will be based on flat terrain. The apartment building is L-shaped (it consists of two rectangles). The building has 5 floors and 1 underground floor. There are a total of 19 apartments in the building, technical facilities and storage facilities are located in the underground part of the building. Residential building is basement. The building is covered with a flat vegetation roof. The peripheral above-ground structure is made of therm-shaped blocks, insulated with ETICS contact thermal insulation system. The main entrance to the building is from the northeast side of the building.
|
|
|
Apartment building
Kryštofová, Iveta ; Žajdlík, Tomáš (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor´s thesis is a process of documentation of implementation of building an apartment house in Brno – cadastre unit Maloměřice. The thesis mainly concerns a detached building with partial basement. This is three-storey building with basement. In my proposal, the object consists of seven dwelling unit total, from which one flat was designed for accessible usage. Structural system of the building was solved by using clay blocks, whereas the basement external walls were created by permanent formwork blocks. The floor structure was made from cast-in-place reinforced slabs. The object is roofed with a warm flat roof.
|
|
|
Multifunctional Building
Ptáček, Lukáš ; Charamza, Josef (referee) ; Sukopová, Dáša (advisor)
The subject of this master’s thesis is elaboration of project documentation for a multi-functional building according to the actual standards and norms given by law. The object has four floor above the ground and one floor partly below ground level with nine flats and two commercial premises. Residential part and commercial premises are separated from each other operationally independent and accessible main entrances. The basisc are made from contrete strips. The house is made by a brick technology of a ceramic blocks. The external walls are insulated with certified contact thermal insulation system. The building is roofed with warm flat roof.
|
|
|
Multifunctional building Pod Spravedlností
Ferdan, Martin ; Sukop, Lukáš (referee) ; Sukopová, Dáša (advisor)
The subject of the diploma thesis is the processing of project documentation for new construction of a multifunctional building. The new building is located in the cadastral area the city of Moravské Budějovice. The use of the object consists of two parts object. And a part that is used for administrative purposes and a part that is used for housing part. The administrative part is located in the left part of the building, the residential part in the right part. The building is designed as a three- and four-story building, which is partially basement. The building is covered with flat roofs. The object is based on foundation belts made of plain concrete. Vertical supporting structures above ground floors are designed from ceramic blocks. Ceiling construction and stairs designed reinforced concrete.
|
|
|
Multifunctional family house
Vdoleček, Jaroslav ; Stodůlka, Jindřich (referee) ; Sukopová, Dáša (advisor)
The goal of this bachelor project is to design a multifunctional family house with a service of a lawyer´s office. The house is designed as a brick house made of clay blocks Porotherm profi. Horizontal bearing structures are made up of reinforced concrete slabs. Footings are designed as unreinforced. The building has a rugged floor plan with 2nd floor in a residential part. The whole object is completed by a flat roof with parapet. A garage with parking place for two cars states cars and small garden equipment is also part of family housing. Law firm Lawyer´s office has its own independent entrance next to the entrance to the house.
|
guest ::
