National Repository of Grey Literature 21 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Studium nestabilní plastické deformace metodou akustické emise
Molnárová, Orsolya ; Dobroň, Patrik (advisor) ; Lukáč, Pavel (referee)
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at various strain rates and at room temperature (RT). The results are discussed using concurrent acoustic emission (AE) monitoring during mechanical testing and the AE parameters are correlated to the microstructure and to the stress-time curves. All samples exhibited the Portevin-Le Châtelier (PLC) effect of different types, dependently on the heat treatment and the applied strain rate. The occurrence of the PLC effect is manifested by burst AE signals with high amplitudes. Statistical analysis of the AE signals has shown the power-law probability distribution.
Study of mechanical and thermal properties of nanoparticle-reinforced composites
Németh, Gergely ; Mathis, Kristián (advisor) ; Lukáč, Pavel (referee)
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the present work the deformation behavior of magnesium-based alloy AZ31 reinforced by SiC nanoparticles which was produced by horizontal continual casting is studied. Tension tests in the room temperature, compression tests in the temperature range of 20řC-300řC have been preformed. Samples was with two different orientation. Deformation strain rate was 10-3 s-1 . Simultaneously, the acoustic emission is recorded and studied. The mechanisms of plastic deformation of material are discussed mainly in term of mechanical twinning. Dependence of deformation behavior in compression on temperature is analyzed. The microstructure of original and deformed material is also studied. Keywords: magnesium alloys, composit material, mechanical twinning, metals with hexagonal structures.
Mechanical properties of pre-compressed Mg-Zn-Ca alloy
Hegedüs, Marius ; Dobroň, Patrik (advisor) ; Lukáč, Pavel (referee)
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous deformation with further relaxation and/or additional heat treatment on deformation behaviour of the extruded Mg-Zn-Ca alloy. The significant influence of twins formed after pre-compression on mechanical properties was investigated. Evolution of microstructure, especially a formation of twins, is observed by light and scanning electron microscopy. The acoustic emission technique is used to determine active deformation mechanisms: dislocation slip and twinning. The results can be used for developing Mg alloys with enhanced properties.
Investigation of deformation mechanisms in textured magnesium alloy
Dittrich, Jan ; Minárik, Peter (advisor) ; Lukáč, Pavel (referee)
Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou Autor: Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí bakalářské práce: RNDr. Peter Minárik, PhD., Katedra fyziky materiál· Abstrakt: Předložená práce se zabývá studiem deformačních mechanism·, zá- visejících na orientaci vzork· v·či p·vodní textuře válcované hořčíkové slitiny, pomocí pokročilých in-situ i ex-situ metod. Během deformačních zkoušek, které byly prováděny v tlaku a v tahu, byla současně zaznamenávána akustická emise. Mikrostruktura deformovaných vzork· poté byla zkoumána metodami optické mi- kroskopie a difrakce zpětně odražených elektron·. V práci byla zjištěna výrazná závislost mechanických vlastností a aktivovaných deformačních mechanism· na orientaci vzork· v·či zjištěné bazální textuře válcovaného plechu hořčíkové sli- tiny AZ31. Dále byla ustanovena souvislost mezi základními parametry akus- tické emise a aktivovanými deformačními mechanismy. Rovněž byla pozorována a objasněna asymetrická odezva akustické emise při deformaci tlakem a tahem, související s rozdílným vývojem mechanického dvojčatění v pr·běhu plastické deformace. Klíčová slova: hořčíkové slitiny, deformace, dvojčatění, akustická emise, EBSD
Mechanical properties of pre-compressed Mg-Zn-Ca alloy
Hegedüs, Marius ; Dobroň, Patrik (advisor) ; Lukáč, Pavel (referee)
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous deformation with further relaxation and/or additional heat treatment on deformation behaviour of the extruded Mg-Zn-Ca alloy. The significant influence of twins formed after pre-compression on mechanical properties was investigated. Evolution of microstructure, especially a formation of twins, is observed by light and scanning electron microscopy. The acoustic emission technique is used to determine active deformation mechanisms: dislocation slip and twinning. The results can be used for developing Mg alloys with enhanced properties.
Electron microscopy studies of materials thermal stability.
Králík, Rostislav ; Cieslar, Miroslav (advisor) ; Lukáč, Pavel (referee)
Thermal stability of Al-Fe-Mn-Si alloys prepared by twin roll casting accom- panied by intensive cooling and plastic deformation was studied. The goal of the study is to map processes occurring during a model homogenizaton annealing of individual alloys which differ by the ratio of alloying elements. Model in-situ an- nealing in the transmission electron microscope and resistometry measurements with linear heating were used for identification of occurring processes. Another goal is to determine the crystalographic structures of primary and secondary pha- ses present in the alloys. Results show that the concentration of alloying elements has a significant influence on transformation temperatures of primary phases as well as the structure of primary and secondary phases. 1
Study of mechanical and thermal properties of nanoparticle-reinforced composites
Németh, Gergely ; Mathis, Kristián (advisor) ; Lukáč, Pavel (referee)
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the present work the deformation behavior of magnesium-based alloy AZ31 reinforced by SiC nanoparticles which was produced by horizontal continual casting is studied. Tension tests in the room temperature, compression tests in the temperature range of 20řC-300řC have been preformed. Samples was with two different orientation. Deformation strain rate was 10-3 s-1 . Simultaneously, the acoustic emission is recorded and studied. The mechanisms of plastic deformation of material are discussed mainly in term of mechanical twinning. Dependence of deformation behavior in compression on temperature is analyzed. The microstructure of original and deformed material is also studied. Keywords: magnesium alloys, composit material, mechanical twinning, metals with hexagonal structures.

National Repository of Grey Literature : 21 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.