|
|
Electromagnetic field calculation of Induction machine for different mechanical load
Hetflajš, Martin ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
This bachelor’s thesis deals with an analysis of the induction machine electromagnetic field distribution with real parameters. Whole analysis was done for three point of the mechanical load by finite element method in ANSYS. In the next part is described a basic theoretically research of the electromagnetic field and also preliminary survey of the numeric method for FEM. This thesis also contains an analysis of electromagnetic model of analyzed induction machine with detailed description of each analysis step and in conclusion the results summary was done.
|
|
|
Optimization of the permanent magnet machine based on the artificial inteligence
Kurfűrst, Jiří ; Duroň,, Jiří (referee) ; Singule, Vladislav (referee) ; Ondrůšek, Čestmír (advisor)
The dissertation thesis deal with the design and the optimization of the permanent magnet synchronous machine (SMPM) based on the artificial intelligence. The main target is to apply potential optimization methods on the design procedure of the machine and evaluate the effectiveness of optimization and the optimization usefulness. In general, the optimization of the material properties (NdFeB or SmCo), the efficiency maximization with given nominal input parameters, the cogging torque elimination are proposed. Moreover, the magnet shape optimization, shape of the air gap and the shape of slots were also performed. The well known Genetic algorithm and Self-Organizing migrating algorithm produced in Czech were presented and applied on the particular optimization issues. The basic principles (iterations) and definitions (penalty function and cost function) of proposed algorithms are demonstrated on the examples. The results of the vibration generator optimization (VG) with given power 7mW (0.1g acceleration) and the results of the SMPM 1,1kW (6 krpm) optimization are practically evaluated in the collaboration with industry. Proposed methods are useful for the optimization of PM machines and they are further theoretically applied on the low speed machine (10 krpm) optimization and high speed machine (120 krpm) optimization.
|
|
|
Methodology of machine tool’s electric drive system modeling
Pruša, Radomír ; Černohorský,, Josef (referee) ; Kurfűrst, Jiří (referee) ; Huzlík, Rostislav (advisor)
The present dissertation is focused on the methodology of modelling of the machine tool drive. The initial chapters contain a review of the current state of knowledge in the field of drive modelling with a focus on the electromagnetic part, thermal field and drive control. The acquired overview and orientation in the subject matter has enabled the development of a systematic analysis on the topic of modelling the machine tool axis drive. The follow-up work was aimed at obtaining the appropriate quality of the output parameters, according to the subsequent use of the results. The reason for this approach is to ensure only a minimum of input parameters. At the same time, the individual parameters must be readily available or easily measurable. The actual methodology of the drive modelling method was also based on the described strategy. The basic building blocks were chosen to be the warming of the machine, the energy balance, the setting of the control structure and, last but not least, the positioning accuracy. The applied methodology was also verified at the end of the thesis under different operating conditions, which were adapted to multiple drive variations.
|
|
|
Optimalization of vibration microgenerator
Kurfűrst, Jiří ; Hadaš, Zdeněk (referee) ; Ondrůšek, Čestmír (advisor)
The article describes how to produce energy necessary for sensor supply. These generators are used as a local source operating on vibratory principle. Mechanical vibrations that occur in moving machines, in nature etc. are used in order to gain required energy. So are kinesis principles and analysis employed in some of the avaible generators. It also contains patent and literary background research. Work is oriented to solving mechatronic perimeter, in the concrete micro - generator. Mechatronic perimeter piles from seat power control parts and mechanical parts, where common solving equation system leads to correct solving. Mentioned analyses be of consequence for usage optimization methods artificial intelligence. Optimization method are used on optimum solving proposal micro - generator. To inquest dynamism system was used program Simulink (part of MATLAB), generator is buckthorn for f = 17 [Hz] acceleration yam = 0,5g [ms-2]. As a algorithm is used SOMA – All to one.
|
|
|
Calculation of induction machine stray looses
Jirásek, Tomáš ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle additional losses in an electric rotary machines and a calculation of these losses for induction machine. The additional losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage.
|
|
|
Design, optimization and full load circuit simulation of the surface mounted permanent magnet machine
Bláha, Martin ; Ondrůšek, Čestmír (referee) ; Kurfűrst, Jiří (advisor)
This thesis deals with the possibility of using the finite elements method for the analysing of synchronous permanent magnets machines. The aim of this work is to discuss the possibility of the machine design more effectively with using the finite elements method and Maxwell software for the simulations. On the created parametric model, simulations were performed according to master thesis assignment. The aim of this work is to determine induced voltage, iron losses, machine inductances and make a permanent magnets demagnetization analysis. From simulations results the machine efficiency is calculated. The parametric model was used for the optimization of selected parameters. From results of optimization new dimensions of permanent magnets was obtained. Machine efficiency was increased by new permanent magnet material and optimized design.
|
|
|
Study of Power Plant Connection to Power Network
Sýkora, Martin ; Kurfűrst, Jiří (referee) ; Paar, Martin (advisor)
It is necessary to judge the influences of producers on the electric compounds while creating electrical energy or during the regulation of those existing. These analyses are sorted out by so called studies of connectivity. These calculations analyze the degree of connection of the producer and the standby unit during a break-down. The results of this report are several recommendations for creating such unit and succeeding steps leading to secure the stability and safety of the electric compound operation. The aim of this thesis is to discuss about software for PC solutions for static and dynamic network model, to draft power outlet into a network of generating high voltage, to complete a study of connectivity with respect to all the distortion factor, as increased voltage, inrush current at startup, flicker, harmonic currents, interference ripple, contribution to short-circuit current, reactive power control options, and demands for compensation.
|
|
|
Faults identification of AC windings in production process
Samek, Josef ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
In this paper stator manufacturing process of stator is described. Mainly description is aimed on winding, insulation and copper wire. Discussion about origin of insulation damage possibilities during manufacturing is included. Statistics survey about failure causes of stator revealed during manufacturing process and warranty claims is presented. One test method from list of market available winding tests is chosen - partial discharge; described in detail and applied on the correct stator and the damaged stator. Results are interpreted.
|
|
|
FEA modelling of synchronous machine
Ficza, Tibor ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca sa zaoberá s modelovaním synchronného stroja s permanentnými magnetmi pomocou metody konečných prvkov. K modelovaniu sme si zvolili 3 fázový synchronný stroj s permanentnými magnetmi na povrchu rotora z firmy VUES. Najprv vypočítame parametre stroja a potom spravíme statický model pomocou programu FEMM a Matlab a budeme hladať možné riešenia na 2D dynamický model. Pomocou programu Ansys Workbench spravíme 3D model tohoto stroja budeme a porovnávať výsledky simulácie.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
guest ::
