|
| |
|
|
Departures Hall
Kubíček, Ján ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
This thesis focuses on the design and assessment of the supporting steel structure of departures hall for international airport Pardubice. The design is processed in two variants, one of which is selected and further elaborated. The hall contains one-story built for office and comercial use. To obtain the internal forces in the structure, modelling of the hall in the FEM computermodeling software was selected. The thesis includes manual assessment of selected elements and details, the assessment of elements in computational software, drawings and bill of material.
|
|
|
Production of Pipe Section Elbow (R=1D) with manual metal Arc Welding
Hráček, Jan ; Staněk, Vlastislav (referee) ; Kubíček, Jaroslav (advisor)
This thesis is the final piece of work of a distant form of studies majoring in B-STG Machinery technology and proposes the technology of production of pipe section elbow (R=1D) from seamless pipe DN500 (O508 x 14). The thesis puts forward and evaluates from the technical-economical point of view four kinds of welds combining additional materials from ESAB company for manual metal arc welding using methods 141 and 111. The construction design is made by the ČSN EN 13 480 criteria – metal industrial pipes. The welds of pipe section elbow are designed and done by TPE 10-40/1771/81 – general technical rules of assembling welding pipes of powerplants VVER type valid for EMO 12 (Mochovce powerplant, units 1 and 2). For the construction and modeling of the pipe section elbow ratio (R=1D) programs by Autodesk were used.
|
|
|
Structual welding of aluminium alloy
Blahák, Petr ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The project elaborated in frame of engineering studies branch 2303R002 presents a project that contains welding a structure made of aluminium alloy. There were two usable methods selected, based on literal study of welding aluminium alloys, TIG welding and friction welding, and these were compared with alternative methods of joining, hard soldering and bonding. A work procedure was made for TIG method, soldering and bonding and four experimental joins were made thereafter. Project compares these methods mainly in economical way, also in way of technological difficulties and in way of observance the strength of base materials. Project also deals with problems with lowering strength of base material in heat affected area, burn out of thin material, tendency of aluminium to fill with hydrogen, quick oxidation and consequent hard surface layer emerging on the aluminium.
|
|
|
Manual versus orbital GTAW piping welding
Hofbauer, Jan ; Kubíček, Jaroslav (referee) ; Sigmund, Marian (advisor)
In thesis are compared options of stainless steel piping welding, orbital and manual version of method GTAW and GMAW. At the beginning, these methods are described theoretically and after that there are described materials used for fabrication two test welds on austenitic steel piping of diameter 168 mm. The first weld was made by orbital method GTAW, the second one by manual method GMAW. Next, these two welds are compared based on defects, welding parameters and width of heat affected area. The conclusion is that both welds are defect-free and because of economical aspects is better to use orbital GMAW method for this diameter of piping.
|
|
|
Laser brazing in the car industry
Podstavek, Michal ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The project elaborated in frame of engineering studies of the subject M-STG Mechanical Engineering describes elementary methods of joining in the automotive industry. Moreover, it inquires into optimization of laser brazing on the back cover ŠKODA Superb. During the optimization of the process six samples were designed, and the adjustment of the brazing parameters were performed. Consequently, the samples were evaluated by tensile and metallographic tests. Finally, EDS analysis was performed and visual assessment as well.
|
|
|
Evaluation of quality welds on chains for harvester
Teuer, Tomáš ; Kubíček, Jaroslav (referee) ; Sigmund, Marian (advisor)
The diploma thesis examines the influence of setting welding parameters and welding process on the resulting structure and strength of the welded joint of harvester chains. The theoretical part discusses the problem of weldability of pine steels by using method “135” with the possibility of destructive or non-destructive testing of welded joints. In the practical part, this matter is examined on a specific weldment, the harvester chain. Cross member with a cube welded in two ways by method 135, followed by an assessment of the performance of welds. The results of the evaluation are written down in the manual.
|
|
|
New aspects of MIG/MAG welding
Týn, Zbyněk ; Daněk, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This bachelor thesis is focused on the latest welding technology MIG / MAG. Between which such us method of Cold Metal Transfer or Advanced CMT. These new techniques are mainly used for welding thin sheets. They integrate gradually into the connecting of various types materials and also bulky welded structures. All of this is demonstrated thanks to the management and control of the welding process.
|
|
|
Optimization of surface treatment of stainless steels
Mačátová, Lucie ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
The project deals with the processes of degreasing industry and testing new laser cleaning process, which has been experimentally verified and tested in the production process. Project also deals with soldering in general as a technology of joining metals. Included are the main components of the soldering, such as solder, flux, the types of connections and their use, ways of soldering and last but not least the soldering corrosion-resistant steel.
|
|
|
Surface treatments in mechanical engineering
Čudová, Monika ; Kubíček, Jaroslav (referee) ; Žák, Ladislav (advisor)
The project was developed within the bachelor study presents experimental verification of two given varnishes. They are applied on a specially made plate. It was based on literary studies of corrosion coatings issues - coatings and practical tests. The samples were painted and tested according to the standards. The samples were tested on adhesion of varnishes, bending test and salt stray test. Finally all tests were evaluated.
|
guest ::
