|
| |
|
|
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects
Rada, Václav ; Fíla, Tomáš ; Zlámal, Petr ; Koudelka_ml., Petr ; Šleichrt, Jan ; Macháček, Michael ; Vavřík, Daniel ; Kytýř, Daniel
In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup with electromagnetic voice coil actuator mounted on top of the rotary stage of the setup. The strict synchronization of the components, the rotary stage, the electromagnetic actuator movement and the detector readout is accomplished with use of the detector hardware trigger and hard real-time Linux operating system. Cylindrical sample manufactured from epoxy resin with metal particles to enable movement tracking is scanned in a stationary position and during periodical movement induced by the vibration stage. The volumetric data of the scans is compared and the results of this contribution represent an important step towards identification of defects through modal analysis of in-situ harmonically vibrating object.
|
|
|
Tomographic investigation of the sandstone fracture toughness
Vavřík, Daniel ; Beneš, Pavel ; Fíla, Tomáš ; Koudelka_ml., Petr ; Kumpová, Ivana ; Vavro, Martin
It is well known that the measured values of the fracture toughness of quasi brittle materials are influenced by material heterogeneity, dimensions, boundary conditions, and unequal tension and compression properties. Standard testing methods supposing isotropic material, in contrary the quasi-brittle materials differ from this theoretical expectation, therefore this approach may fail. The authors present Local Fracture Toughness Testing (LFTT) method to overcome this obstacle. LFFT based on a complex methodology using a series of tomographic reconstructions recorded during specimen loading is calculated independently of the outside boundary conditions.
|
|
|
Possibilities of using 4D computed tomography in fracture tests
Kumpová, Ivana ; Fíla, Tomáš ; Koudelka, Petr ; Rozsypalová, I. ; Keršner, Z. ; Kytýř, Daniel ; Vopálenský, Michal ; Vavřík, Daniel ; Vyhlídal, M. ; Drdácký, Miloš
The paper presents the study of the internal structure and fracture properties of selected quasi-brittle building materials subjected to temperature changes and the possibility of applying the method combining bending fracture tests and time-dependent computed tomography (4D CT). The tested specimens were subjected to hightemperature effects and subsequently tested by a four-point bending during 4D CT. Thus, 3D image information was obtained in different phases of loading and material damage. Comparative compression strength measurements were also performed. These results are in good agreement
|
|
|
In-situ compression test of artificial bone foams in controlled environment using X-Ray micro-computed tomography
Glinz, J. ; Kytýř, Daniel ; Fíla, Tomáš ; Šleichrt, Jan ; Schrempf, A. ; Fürst, D. ; Kastner, J. ; Senck, S.
In this study, we investigated specimens of artificial bone foams, developed by the research group for surgical simulators at the UAS Linz, which are used to mimic the haptic feedback of physiologic and pathologic bone for more realistic surgery training. Specimens with two kinds of mineral filler material as well as different amounts of foaming agent were tested in an environmental in-situ loading stage developed by the ITAM CAS and scanned via X-ray micro-computed tomography. In this in-situ stage, specimens can be immersed in liquid and tested under temperature-controlled conditions. Consequently, a total amount of 12 specimens was subjected to compression loading, half of them immersed in water at 36.5 °C and half in dry condition. Results showed that there is no significant influence of liquid immersion to the compression outcome. However, foams with less amount of foaming agent appeared to have smaller pores resulting in higher compression strength.
|
|
|
Multi-channel control system for in-situ laboratory loading devices
Rada, Václav ; Fíla, Tomáš ; Zlámal, Petr ; Kytýř, Daniel ; Koudelka_ml., P.
In recent years, open-source applications have replaced proprietary software in many fields. Especially open-source software tools based on Linux operating system have wide range of utilization. In terms of CNC solutions, an open-source system LinuxCNC can be used. However, the LinuxCNC control software and the graphical user interface (GUI) could be developed only on top of Hardware Abstraction Layer. Nevertheless, the LinuxCNC community provided Python Interface, which allows for controlling CNC machine using Python programming language, therefore whole control software can be developed in Python. The paper focuses on a development of a multi-process control software mainly for in-house developed loading devices operated at our institute. The software tool is based on the LinuxCNC Python Interface and Qt framework, which gives the software an ability to be modular and effectively adapted for various devices.
|
|
|
Instrumentation of four-point bending test during 4D computed tomography
Kytýř, Daniel ; Fíla, Tomáš ; Koudelka_ml., Petr ; Kumpová, Ivana ; Vopálenský, Michal ; Vavro, Leona ; Vavro, Martin
High-resolution time-lapse micro-focus X-ray computed tomography is an effective method for investigation of deformation processes on volumetric basis including fracture propagation characteristics of non-homogeneous materials subjected to mechanical loading. This experimental method requires implementation of specifically designed loading devices to X-ray imaging setups. In case of bending tests, our background research showed that no commercial solution allowing for reliable investigation of so called fracture process zone in quasi-brittle materials is currently available. Thus, this paper is focused on description of recently developed in-situ four-point bending loading device and its instrumentation for testing of quasi-brittle materials. Proof of concept together with the pilot experiments were successfully performed in a CT scanner TORATOM. Based on results of the pilot experiments, we demonstrate that crack development and propagation in a quasi-brittle material can be successfully observed in 3D using high resolution 4D micro-CT under loading.
|
|
| |
|
|
Deformation behaviour of gellan gum based artificial bone structures under simulated physiological conditions
Krčmářová, N. ; Šleichrt, J. ; Fíla, Tomáš ; Koudelka_ml., Petr ; Kytýř, Daniel
The paper deals with investigation of deformation behaviour of gellan gum (GG) based\nstructures prepared for regenerative medicine purposes. Investigated material was synthesized as porous spongy-like scaffold reinforced by bioactive glass (BAG) nano-particles in different concentrations. Deformation behavior was obtained employing custom designed experimental setup. This device equipped with bioreactor chamber allows to test the delivered samples under simulated physiological conditions with controlled flow and temperature. Cylindrical samples were subjected to uniaxial quasi-static loading in tension and compression. Material properties of plain scaffold buffered by 50 wt% and 70 wt% BAG were derived from a set of tensile and compression tests. The results are represented in form of stress-strain curves calculated from the acquired force and displacement data.
|
|
|
Time lapse tomography of fracture progress in silicate-based composite subjected to the loading a combination with acoustic emission scanning
Kumpová, Ivana ; Kytýř, Daniel ; Fíla, Tomáš ; Veselý, V. ; Trčka, T. ; Vopálenský, Michal ; Vavřík, Daniel
The initiation and propagation of a fracture in quasi-brittle materials (such as silicatebased composite) is an increasingly discussed topic for which various methods of research have been developed/applied. As the quasi-brittle silicate-based composite compounds are very non-homogenous, the mechanism of the crack initiation and propagation can be very different even for samples with the\nidentical geometry. One possible approach to study the fracture mechanism in quasi-brittle materials is to use several different experimental techniques in a single experiment and perform detail analysis to identify generally valid fracture process phenomena. In this work, a simultaneous monitoring of fracture\nprocess zone formation and propagation by three different methods is presented and discussed. A three point bending test was performed on a notched silicate composite specimen. During the loading process, a highly accurate force displacement dependence was recorded accompanied with X-ray radiography,\nX-ray computed tomogra-phy and acoustic emission scanning.
|
guest ::
