|
|
Production Planning with the Support of Information System
Dvořák, Pavel ; Marvánek, Karel (referee) ; Videcká, Zdeňka (advisor)
This thesis deals with adding planning to the current information system as requirement by the company. The theoretical part describes the methodes of information systems for the production plan. These tools are mostly general and trying to cover the entire spectrum of manufacturing processes. The practical part is devoted to implementing of the produciton planning. The modul planning is incorporated into the current information system.The modul planning has been implementing for efficiency of the systemand faster throughput of the orders the company.
|
|
|
Principals, switching functions and routing techniques in computer networks
Dvořák, Pavel ; Pelka, Tomáš (referee) ; Polívka, Michal (advisor)
This bachelor thesis consider main principles and function of active network components. Mainly is intent to component working on the third level of referential model ISO/OSI, router. There are described its main parts and more closely charactered routing protocols. Then is verified the ability of dynamic routing to react to failure in the network and there is measured the reaction time of crossing to secondary route when using different routing protocols. Another part of the thesis is focused on the questions of Quality of Service (QoS) and its support in computer networks. There are explored various ways of the QoS configuration on the routers and the proper of them is chosen and applied to the test network.
|
|
|
Drainage circular machine
Dvořák, Pavel ; Mana, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with a design of a circular draining machine. The aim is to design a machine that complies with the respective requirements. The machine is assembled in a line for the preparation of paper stock, which is further processed for final paper production.
|
|
|
Negative Influences of Spindle Vibrations
Dvořák, Pavel ; Huml, Jan (referee) ; Havlíková, Marie (advisor)
This bachelor’s thesis deals with the vibration measuring of the spindle no.1 of the machine tool STRATOS. The vibrations have a fundamental impact both on the machining process and on the observance of a prescribed tolerance. This thesis also treats the accelerometers function principles, namely of the piezoelectric and piezoresistive ones. The aim of the research is to collect the data needed for the proposition of a suitable monitoring mechanism which will monitor the condition of the machining spindle. The thesis also includes a prototypal protocol about the measuring procedure, its achieved results, and graphs. The issue analysis is conceived to the effect that it is applicable for the realization of the monitoring mechanism which will be part of the process and will show the actual state and the condition of the spindle.
|
|
|
Multiparametric segmentation of MR images
Chovanec, Ján ; Šmirg, Ondřej (referee) ; Dvořák, Pavel (advisor)
The aim of the thesis was familiarity of segmentation methods for automatic segmentation of MR images, using multiparametrical display. The theoretical part focuses on the description of methods of segmentation techniques. In the practical part are implemented K-means and level-set method. The methods are tested on the images of the brain obtained by different sequences (T1, T1c, T2, FLAIR). Segmentation methods are implemented in the program MATLAB. Implemented segmentation accuracy is demonstrated on data which there are reports reference results. Evaluation methods is performed using different classifiers decision. The K-means method is tested different metrics and different combinations of the input image. Finally, both methods are compared with one another and visually evaluated against the reference image.
|
|
| |
|
|
Segmetation of tomographic data in 3D Slicer
Korčuška, Robert ; Dvořák, Pavel (referee) ; Mikulka, Jan (advisor)
This thesis contains basic theoretical information about SVM-based image segmentation and data classification. Basic information about 3D Slicer software are presented. Aspects of medical images segmentation are described. Workplan and implemetation of SVM method for MRI segmentation in 3D Slicer sofware as extension module is created. SVM method is compared with simple segmentation algorithms included in 3D Slicer. Quality of segmentation, based on SVM, tested on real subjects is experimentaly demonstrated.
|
|
|
Seqence circuit for radioamateur transciever
Dvořák, Pavel ; Šnajdr, Václav (referee) ; Lukeš, Zbyněk (advisor)
In this paper we will deal involving short-wave radio station and its control by the sequencer. Mostly it will be a time delay of the PA and the antenna switching relay in the transmitter (TX) to receiver (RX) side. Time delays will be controlled programmatically using ATmega 16 microprocessor, which will form part of the main control sequencer. The delay will set the total time of keying in messages, when we take into account the loss due to delayed first symbol. Keying will be done from several sources, among the main sources will be ordered from keying the radio, telegraph keys, and PC. The transmission signal is used amplitude modulation (SSB) in the CB zone.
|
|
|
Perfusion image processing
Dolníček, Petr ; Dvořák, Pavel (referee) ; Mikulka, Jan (advisor)
The goal of this diploma thesis was to create a script in MATLAB, which is capable to load DICOM pictures, read the data in their headers and then select the right series for perfusion analysis. This analysis is based on detection of contrast fluid in bloodstream and tissue and right interpretation of concentration changes of this fluid in time. This work is trying to describe a way of building an ultimate system capable of autonomous tumor analysis and classification. In the end, there is an analysis of DICOM sample performed by created script.
|
|
|
Object Description in Images
Dvořák, Pavel ; Šmirg, Ondřej (referee) ; Zukal, Martin (advisor)
This thesis consider description of segments identified in image. At first there are described main methods of segmentation because it is a process contiguous before describing of objects. Next chapter is devoted to methods which focus on description identified regions. There are studied algorithms used for characterizing of different features. There are parts devoted to color, location, size, orientation, shape and topology. The end of this chapter is devoted to moments. Next chapters are focused on designing fit algorithms for segments description and XML files creating according to MPEG-7 standards and their implementation into RapidMiner. In the last chapter there are described results of the implementation.
|
guest ::
