|
|
Possibilities of evaluation durability of the surface layer of concrete structures
Blažek, Michal ; Žalud, Oldřich (referee) ; Vymazal, Tomáš (advisor)
The thesis is focused on possibilities of durability evaluation of surface layer of concrete structures. The durability of concrete surface layer usually determines the durability of the structure as a unit. It has to be determined in what environment the structure is situated and what influences it has to face, to set the durability of the structure. There is a several normative prescription to set the resistance of the structure. There is formulated a summary of the most widely used and known prescriptions in the theoretical part of the thesis. It is a lot of effort to estimate the durability of the concrete by estimation of permeability of the concrete surface layer recently. Thus these methods are also formulated in the summary and there are compared the individual outputs of the tests. The permeability and pore structures of the concrete surface layer are crucial parameters for the durability of concrete structure. These parameters influence the construction properties of the concrete as well, thus the thesis is focused on relationship of the pore structure and the strength in press of the concrete.
|
|
| |
|
|
Family house in Rokytnice nad Rokytnou
Blažek, Martin ; Kervitcer, Marek (referee) ; Sobotka, Jindřich (advisor)
This bachelor thesis solves the design of a family house in Rokytnice nad Rokytnou in the district of Třebíč. The family house is designed as a two-story building with a basement, warm flat roof and a garage for two cars. The design respects the nature of the surrounding area and makes full use of the site. Designed for 4 to 6 people. The perimeter walls in the basement are made of Porotherm ceramic fittings and insulated with polystyrene. The perimeter walls of the above-mentioned floors are also made of Porotherm ceramic fittings with embedded thermal insulation. Ceiling structures are reinforced concrete. The plot is mostly flat. The thesis contains the drawing and documentation in the form of the implementation project, the design includes also the thermal technical assessment, the fire safety solution, the acoustic assessment and the lighting assessment.
|
|
| |
|
|
Tracked vehicle for transport of the pallets
Blažek, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of a remotely controlled tracked vehicle for the transport of pallets on unstable ground. The aim of the work is to make a short research of similar tracked transport machines and to design concept including choice of vehicle drive, design of pallet lifting equipment and strength calculations of sub-parts.
|
|
|
Multifunctional House Jihlava, Handlovy Dvory
Blažek, Martin ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The subject of this diploma thesis is the project documentation of the new multifunctional building on the plot in Jihlava, Handlovy Dvory. The building is planted in the shape of a substantially elongated rhomboid and is staggered into almost half-symmetrical halves. The height of these two parts is mutually displaced by one half of the floor so that the object better copes with the significant slope of the plot. The building has five above-ground floors. On the first floor there is a beerhouse with its facilities. The beerhouse goes on to the terrace. On the second to fifth floors are individual flats. The flats are designed primarily as 1 + kitchen and 2 + kitchen. On the second floor there are also apartments. Parking is done by a perpendicular stall around the adjacent road and the car park next to the building. The work contains drawing documentation for construction, thermal engineering assessment, fire safety solution, acoustic assessment and lighting assessment
|
|
|
New Building of the Hotel with Wellness Center
Blažek, Milan ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The main theme of my thesis is a projecting documentation for a new building – Completely new Wellness hotel. This building will be used for accomodation, feeding, wellness and parking for cars. Hotel has one stage under the ground and three stages above. It is divided into 4 parts: Wellness center with gym, massage saloon or sauna with entrance on its own terrace in the second floor, accomodation with over 25 rooms with different capacity of the room with possibility of your own terrace in the south part of the building, your own laundry room or offices for management; a restaurant with capacity more than 100 guests and with its own terrace in the first floor or garage for over than 40 cars. The whole building is also designed for people with a special needs, there are 2 rooms and 4 parking spots dedicated to these people with special needs. The whole building is divided functionally for guests and employees. The building has two lifts of a new generation on the west and east part; air conditioning systems for the hotel, kitchen, wellness center and other neccessary technical means. Carrying system is made of prefabricated, framework standing on a monolitic reinforced concrete snugs connected with reinforced concrete tresholds in the place of their shroud. It is done from ceramic breeze blocks and heated with desks made of stone fibred according to ETICS. Shroud of the underground is made of concrete breeze blocks. The inside lining is also bricked up with ceramic breeze blocks. The ceiling creates ventricular ceiling pannels, stairs is designed as a prefabricated. The roofs are done as a classic, extensive vegetational, monocover with three laiers of asphaltic, hydroisolated strips. All the terracess are also classical, monocover with walking tract made of concrete pavement on adjustable targets in a wellness center. In the hotel you will find a ceramic pavement.
|
|
| |
|
|
C Language Interactive Interpreter
Blažek, Martin ; Peringer, Petr (referee) ; Martinek, David (advisor)
This master's thesis deals with implementation of ISO C99 language interpreter. The goal of this thesis is to provide support of education in C language programming and fast algorithm prototyping. It enables students to create own C programs and to experiment with language constructions without compiling. User interface includes editor and simple debugger. The interpreter is implemented in a novel grammar development environment written in Java language - ANTLRWorks which includes ANTLR language tool.
|
|
|
Design of Coupling Pin Production
Blažek, Matěj ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor)
Bachelor’s thesis is aimed production of pin, made from steel 11 320-5R. This piece is in accordance to serial production 500 000 pieces year -1 made by cold bulk forming. Specifically it is about heading and forward extrusion. From two production variant was chosen the one with lower strain. By calculations there was set the power needed for production that equals Fc= 368,5 kN. Because of this power there was chosen a machine AKP 3-5 from company Hatebur. In the next step there was designed method that is in the attachment to the thesis. Final step was a control whether the idea of production by simulation is correct or not.
|
guest ::
