|
|
Analysis and design of use of former residential buildings in Nové Sady Street in Brno
Dufková, Kateřina ; Šebesta, Petr (referee) ; Šmahel, Milan (advisor)
The submitted thesis deals with a specific case of dilapidated buildings on Nové sady streetin Brno, Czech Republic, which belongs to the so called "brownfields". The goal of the thesis is to undertake necessary analyses so that the best way of future utilization of these buildings can be defined and, with a respect to the surrounding buildings, a proposal of other suitable objects prepared. At the end, evaluation of the entire project is done. A also mention some potential benefits of the proposed solution - for the immovable properties owners as well as for the neighborhood.
|
|
|
Proposal of Strategy of SBU Development
Šebesta, Petr ; Ondra, Petr (referee) ; Zich, Robert (advisor)
Bývalý americký prezident prohlásil: “Plány jsou nic, plánování je všechno”. V tomto duchu lze říci, že dobře fungující systém strategického řízení je svým způsobem důležitější než samotné dokumenty, které produkuje. V tomto duchu se nese i celá tato práce, která zachycuje určitý stav strategie jedné strategické obchodní jednotky (SBU) firmy GlobSol CZ a její posun kupředu od původních abstraktních cílů k naprosto jasným a konkrétním krokům, které bude třeba v budoucnosti udělat pro rozvoj této obchodní jednotky. Po zhodnocení současného stavu teorie, je provedena analýza současného stavu strategie obchodní jednotky vzhledem k jejím okolím. Ze závěrečné SWOT analýzy jsou pak pro jednotlivé její prvky určovány cíle směřující ke strategickému rozvoji. Každý cíl je rozvinut do jednoho, či více kroků, které jasně determinují jak a kdy lze daného cíle dosáhnout. Na závěr je zhodnocen přínos této obchodní strategie, její předpoklady a rizikové faktory. Nejcennějším na celém dokumentu je však samotná činnost tvorby strategie, která rozvíjí zcela nové pohledy na možnosti rozvoje strategické obchodní jednotky.
|
|
|
Calculation model of screw compressor cooler
Šebesta, Petr ; Hejčík, Jiří (referee) ; Jaroš, Michal (advisor)
This Bachelor’s thesis deals with compact heat exchanger design under specific conditions. Hence ways of finding out thermodynamic and material properties are discussed in the first part as well as heat exchanger design methods. In the second part, compact heat exchanger design process is described in detail. The Bachelor’s thesis includes a calculation model of specific compact heat exchanger created in Matlab-Simulink software.
|
|
|
Analysis of the development project for the construction of an administrative building in Brno
Kolařík, Jan ; Šebesta, Petr (referee) ; Šmahel, Milan (advisor)
The aim of this diploma thesis is determine feasibility and profitability of property development project at particular lands in Brno. Solution of problem includes both, the legislative part that determines possibility lands focused on change of territorial plan and the financial part that estimates costs and revenues in project balance and potencial profits for investor, if project will be realized. Main result of this diploma thesis is to answer the question, if property development project should be realized at particular lands in question and estimate future value of lands and project. Diploma thesis \uv{Analysis of the development project for the construction of an administrative building in Brno} is useful for everyone, who needs estimate potential of a land for profit from realization of property development project.
|
|
|
Risk analysis of pest infestation of wooden structures
Brada, Stanislav ; Hunková,, Veronika (referee) ; Šebesta, Petr (advisor)
The thesis deals with risks of defect occurrences in a wood construction. Wood constructions and their parts are exposed to a number of negative factors influencing their lifetime. The aim of the thesis is to give an outline of risks of defect occurrences in a wood construction attacked by pests and propose measures for their elimination.. These steps are closely described in the individual parts and processes. Part of the thesis is the FMEA analysis, resulting in appropriate chemical protection, a factor considered before incorporation into the construction. The analysis and its outcomes are important for improvement of the wood construction lifetime.
|
|
|
Determination of moisture content in electrical insulating materials
Šebesta, Petr ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
This work is based on determination of moisture content in electrical insulating materials materials and ways to measure the moisture. In the theoretical section describes the methods of thermal analysis, and subsequently described in detail Thermogravimetry method, which is used in the measurement. Measurements are made using the Moisture Analyzer RADWAG 60 W/H connected with a PC, using a variety of samples from inorganic to organic. A great variety of samples was chosen because of demonstrations thermogravimetric methods and a better understanding of wetting and drying of different materials.
|
|
|
Risks and Measures at the Renovation of Vernacular Wooden Structures and Comparable New Buildings
Beníček, Tomáš ; Hunková,, Veronika (referee) ; Šebesta, Petr (advisor)
This diploma thesis is focused on structural progression of massive wooden structures, requirements to contemporary massive wooden structures, development of carpentry joints and connecting instruments used in constructions and reconstructions of these buildings, and analysis of risks connected with reconstructions of selected historical wooden structures. Another item of this thesis concerns on evaluation of possible risks in particular connecting instruments that are used in massive wooden structures per the FMEA method. The main content of thesis includes a description of selected historical wooden structures, options of their damages, forms of remediation and a description of possible risks and measures in reconstructions. In conclusion the thesis focuses on comparison of historical massive wooden structures and comparable new buildings.
|
|
|
Additives effect on electrical properties of the epoxy resins
Šebesta, Petr ; Kazelle, Jiří (referee) ; Frk, Martin (advisor)
Work was carried out in collaboration with SYNPO, Inc. Pardubice, which provided samples resins with various additives for measurement. The work is divided into three theoretical and one practical chapters. The first chapter focuses on dielectrics in general. It deals with their properties and storyline running in them. The second chapter discusses epoxy resins, their formulation, production and application in manufacturing. The third chapter offers a view of the measurement methods used for diagnosing electrical dielectrics. The practical part describes the preparation of samples and their composition, and consequently their measurement with the evaluation of measurement data.
|
|
|
Information System Selection
Šebesta, Petr ; doc. Ing. Petr Sodomka, Ph.D., MBA (referee) ; Koch, Miloš (advisor)
The thesis deals with problems of enterprise information system selection. Based on theoretical knowledge in the field of information systems and their development is the analysis of enterprise information system selection and situation on czech market. Solution suggestions consist of optimal enterprise information system project description and description of created expert system knowledge base for pre-selection of enterprise information system.
|
|
| |
guest ::
