|
|
Piston for Racing Engine Škoda 110
Gerák, Jakub ; Maršálek, Ondřej (referee) ; Svída, David (advisor)
This Bachelor's thesis deals with the defect of the piston Metalex for a racing engine Škoda 110. The aim of my work is to find the reasons for the piston defect, to check the most stressed parts by strength calculation and suggest a possible structural design so that the piston withstands all stresses throughout the required lifespan.
|
|
|
Creation and processing of signal database
Glett, Jiří ; Šebesta, Vladimír (referee) ; Sigmund, Milan (advisor)
The work become acquainted with history and rise databases globally. Construes philosophy structuralization, sorting and purpose using. Work further deal with concrete databases softwares intended directly to processing audio signals. Further treat of programmes that the make possible generation personal database structures. Work deal about SUSAS database and analysing its content. It is created self database of music signals, which includes several musical groups always similar in certain aspect. Speech database contains records from the SUSAS database and records from television programs, reality-shows, sports broadcasts, reports and documents, when speakers are subjected to stress and emotions. The work is a database program that can effectively classify all records and processes. The database can be freely extended. The resulting program was realized into Czech and English version.
|
|
|
Stress-strain analysis of a crane arm
Mora, Lukáš ; Halabuk, Dávid (referee) ; Fuis, Vladimír (advisor)
The content of this bachelor’s work is a summarization of types of tower cranes and subsequent stress-strain analysis of the crane arm of the crane type 150EC-B8 Litronic located on the Šumavská street in Brno. Analytical stress-strain analysis is calculated with equations of equilibrium using joint method in various types of loading of the construction with MAPLE software. Numerical calculation is executed on 3D model of the construction in software ANSYS. The aim of this bachelor work is the verification of the correctness and comparison results of analytic calculation with numeric calculation and evaluation of the results from a limit states and deformation standpoint.
|
|
|
Deformation of tool steels after quenching in vacuum furnaces
Abu Khait, Yosef ; Němec, Karel (referee) ; Pacal, Bohumil (advisor)
In this thesis, the deformation stages, which take place in tool steels after quenching in vacuum furnaces, were studied. This study was focused on the heating and cooling conditions during this type of quenching. In the experimental part, the deformation changes in particular samples made of tool steel after vacuum quenching were analyzed. Minor changes in the volume of samples at higher quenching temperatures compared to lower temperatures were observed.
|
|
|
Návrh vozidla Baja SAE
Hajdušek, Zdeněk ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
This master’s thesis describes the design of the Baja SAE vehicle according to the applicable rules. In the beginning is the work focused on search competing vehicles and subsequently on design the first Baja SAE vehicle in the Czech republic. This thesis is systematically divided into chapters according process to the vehicle design. The main part of a master's thesis is design of axle kinematics in software Adams and frame design. The model was designed in Catia V5. The frame was analysed of torsional stiffness and stress in software ANSYS.
|
|
|
Stone columns - importance of arch effect
Vanko, Peter ; Zdražil, Karel (referee) ; Miča, Lumír (advisor)
The aim of the the thesis is to study the development of arch effect depending on the change of the various parameters such as grid of columns, height of embankments, material of embankment fill and material of columns. The first phase of work summarizes theoretical knowledges of stone columns and arch effect. The next phase deals with analysis of the effect of arch using numerical modeling. In the next part of the second phase circular tank based on stone columns will be modeled, where deformations and stress on columns will be monitored in changing constitutive model and applying substitute characteristics. Obtained results will be evaluated in conclusion.
|
|
| |
|
|
Reinforced concrete load-bearing construction
Tmej, Patrik ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of the thesis is the strengthening and resistance of concrete construction. At the beginning is described composite reinforcement and their specific properties. The thesis specifically follows behavior concrete vault and the effects of load. Resistance vault is calculated by S&T model – strut and tie. Finally, the thesis contain strengthening construction by composite reinforcement. Strengthening is considered by two ways - strengthening by cohesive reinforcement and strengthening by incoherent reinforcement (wrapping).
|
|
|
Strain, stress and strength analysis of the truss construction.
Hladký, Maroš ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
The thesis is focused on strain, strength, and strain analysis of planar truss construction. The purpose of this work is to determine the load on each rod, and to assess the safety against limit states. After determining the primary characteristics, the structure will be modified and load and safety re-calculated. Depending on the outcome, the design will be changed again. Next, will be destined gravity affect on the design and impact of production inaccuracy. Deformation of structure will be calculated.
|
|
|
Pulse flow of liquid in flexible tube
Komoráš, Miroslav ; Šedivý, Dominik (referee) ; Klas, Roman (advisor)
This master’s thesis is dealing with analysis of fluid flow pulse in a flexible tube representing e.g. an artery in a human body. In ANSYS program, 3D simulations were performed, and these are so-called interrelated FSI analysis. In Maple software, 1D simulations of fluid flow in the tube were performed for various thin-walled and thick-walled variants. The aim is using these programs to determine the flow rates and pressures in the tube, its wall deformation and stress. Therefore, the theoretical part deals mainly with basic equations of flow dynamics, linear and nonlinear models and rotationally symmetric vessels. In the computational part are described individual procedures in the mentioned programs.
|
guest ::
