|
|
Detached house
Fazekas, Dávid ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The subject of this thesis is two-storey wooden basement house. The building plot is located in Brno. The House is designed with the view of surrounding buildings and the location. The House will be used for living of a family of five members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a wooden frame with thermal insulation sheathed on both sides of wood chip boards and plasterboards. The ceiling structure is made of wooden beams with embedded insulation. The detached house is covered with two sloping shed roofs. The project was prepared by a computer program called Nemetschek Allplan..
|
|
|
Valuation of real estate in the UK, with a focus on family homes.
Banzetová, Diana ; Matras, Tomáš (referee) ; Klika, Pavel (advisor)
This thesis deals with residential real estate market in the Great Britain and its development. The thesis describes all evalution methods used in the Great Britain, it also describes the current state of the property market, expert work and in the end are described in detail the methods used for the valuation of the house. In thesis attachment is an exemplar of the evalution report for a house in the Great Britain according to the standards and the methodologies used by the evaluation experts in the United Kingdom.
|
|
|
Detached House with Atelier in Hořice
Svoboda, Jiří ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
The bachelor’s thesis deals with the projection of a detached house with an atelier in Hořice. Hořice is a small village located 7kms from town Blansko, which has almost 20,000 inhabitants. This building is situated in author’s village, and therefore the local conditions in terms of construction are very well known. The building was placed in a real plot opposite the place where the author lives. The house has two floors, one floor is a partial cellared. The cellared part is accessible from the street (east side). In the southern part of the basement is designed atelier - a commercial space accessible to the general public. In the northern part there is a garage for two cars and the side entrance to the detached house. The ground floor is a private space for housing. The upper floor is 5+KN. The house has no problem to accommodate a family about 5 members, and also it’s able to accommodate some visitors or grandparents. The rooms are comfortably designed and offer a lot of use for a modern family life. The main entrance to the detached house is through the outdoor staircase. The building is made out of brick, perimeter walls of the lower floors are made of concrete blocks and the top perimeter walls of burnt bricks from the clay. Both floors connect the reinforced concrete staircase. The house is covered by a flat roof. Exterior doors and windows are from aluminum. The building is clad by travertine blocks. The building is connected to the necessary engineering networks. The project documentation is developed in accordance to the decree of the building documentation.
|
|
|
Detached house with design office
Bartošek, Radim ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor´s thesis is a project of a new detached house with a design office at a level of the documentation for the structure realization. The detached house is situated in a small town Příkazy. The building is partly basement with one above-ground floor and a flat roof. The structural system of the basement part is made up of permanent shuttering and the ground part is made up of system SENDWIX.
|
|
| |
|
|
Detached house, Prace
Müllner, Jiří ; Krejsa, Jan (referee) ; Kolář, Radim (advisor)
The subject of this thesis is newly built single-storey brick house from partially in Prace, which is adjacent to a neighboring house. It is a building with a residential attic. The house is designed for housing a family of five . This is a family house rectangular plan with a gabled roof . Orientation residential rooms on the east and west side. Orientation of the building is affected by adjacent buildings . Vertical constructions are made of ceramic bricks and concrete blocks. Ceiling construction is of ceramic ceiling system . The project was prepared by a computer program AutoCAD .
|
|
|
House in Veľký Lapáš
Baťalíková, Viktória ; Pilinszki, Martin (referee) ; Müller, Jan (advisor)
The bachelor´s thesis deals with the design of detached house, which is located in the cadastre unit of the town Veľký Lapáš. It is a two-storey detached house on a slope, with a garage, a balcony on the second floor and a terrace on the first floor. The building is designed for a family of four. The structural system consists of a Porotherm masonry system. The horizontal structural system is made of cast-in-place reinforced concrete. The building is roofed with a flat roof. The bachelor´s thesis is processed in the form of project documentation according to valid legal and technical regulations.
|
|
|
Detached House with Winery
Hlavinková, Veronika ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
This bachelor thesis is focused on a design documentation of a detached house with winery within a cadastre unit of Litovel city. This is a three storey freestanding house with a layout for a family of four. The winery is located in a basement, residential area is located on the first and second floor. A structural system of an object is designed from POROTHERM with an exterior insulation system 120 mm wide. Vertical peripheral supporting structures of the 1st and the 2nd floor will be bricked up with Porotherm 50 eko+ and the basement from a permanent formwork ŽB 25. Interior bearing walls are made of Porotherm 30 profi and non-bearing walls are made of Porotherm 11,5 Aku, except the 2nd floor – these are made of plasterboards Rigips 150 mm wide. Outer coat is silicate, grooved of 2 mm, light brown color. A staircase is designed as cast-in-place reinforced concrete. A ceiling construction is made of keramo beton systém Porotherm (beams Pot and Miako inserts) 250 mm wide. There is a cast-in-place reinforced concrete ceiling over a garage, 150 mm wide. A roof is designed as a roof truss with a clay tile roofing Tondach Hranice11, Amadeus black color. Doors and windows are designed as plastic, mahogany color, a sectional garage door is also mahogany. Floor coverings are designed according to functioning of different rooms – tiles or laminate flooring. The main purpose of my bachelor thesis is to figure out a space arrangement, a suitable construction systém, structural system and a design of drawings including text documentation. This bachelor thesis is in a shape of a design documentation for building execution.
|
|
|
Detached House with Establishment
Minářová, Klára ; Kyceltová, Lucie (referee) ; Králová, Zuzana (advisor)
The subject of the bachelor's thesis is the preparation of project documentation for the construction of a detached house. The object is located in the town of Markvartice in a gently sloping terrain, and it is conceived for families of four members. The family house is designed as a stand-alone, two-floor, with a partly made cellar. There is also a garage in the house. The main entrance is at the level of the 1st floor, and the entrance to the building is at the basement level. The main rooms are oriented to the south. Vertical structures are made of ceramic blocks. The ceiling construction is made of bricks with miako inserts and ceramic concrete joists. The detached house is topped by a shed roof. The project was prepared using the computer program AutoCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
|
Detached house with showroom
Pressburger, Tomáš ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject matter of my Bachelor thesis is the project of a new single-family detached house with historical automobiles' showroom located in Vyšný Kubín in the Slovak Republic. The building is situated on southern slope and has three over-ground floors. The vertical load bearing system consists of combination of Porotherm walling system, monolithic iron-concrete and welted steel pillars. The horizontal load bearing system consists of ceilings from iron-concrete monolithic constructions. The building cladding consists of ventilated façade with exterior wooden trim combined with gabion baskets as one of modern façade elements. Roofing of the building is designed as two flat vegetative roofs and one flat walk-on roof - terrace. The building has also a spacious terrace with swimming pool accessible from both the first as well as the second floor. The building foundations consist of iron-concrete monolithic strips and blocks. The project emphasizes the layout plan, thermal technical properties and safety in use.
|
guest ::
