|
|
Rodinný dům
Hajiyev, Mustafa ; Kalousek, Miloš (referee) ; Mohelníková, Jitka (advisor)
The subject of this bachelor thesis is the about the family residence. The detached house is located in Brno-Královo Pole, in cadastral area Poděbradova. The family house is located on a relatively flat plot and is situated on the north side. The house has two floors, with a balcony on the second floor and flat roof. On the east side there is a storage. The whole family building the residence is made of concrete slabs, with the main focus on Steico building materials. All insulation materials are from Isover. Project documentation was performed in Autocad computer software.
|
|
|
High standard detached house
Kudělková, Marie ; Janda, Lukáš (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis is focused on proposition and elaboration of project documentation for construction of building an object of above-standard family house which is located in the cadastral area of municipality Hodslavice on a site number 1490/28. The project is consistent with the ground plan of the municipality. The object is partially basement building with two overground floors and a garage, which has been projected for two cars. The house has been designed as one accomodation unit intended for a four-member family. Construction system has been solved from concrete blocks BTB Prefa in the basement and from ceramic blocks in the overground floors. The project of inner disposition has been solved so that its function suits to all user´s demands.
|
|
|
Detached house
Bobek, Michal ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
This bachelor thesis deals with design and creation of project documentation for realization of object of family residence in the Radotín, Prague 16. The parcel 2087/66 determined for object is located on the cadastral territory of Prague 16 and it is suitable for construction of quite formidable family houses and buildings of villa house character. The surrounding development is not older than 5 years. The design respects spatial plan and it does not stand out of character of sourrounding development. The attached project documentation is created in concordance with actual valid laws, notices and norms. The solved object is a building of bigger family residence with two overground floors, without basement and with garage for two cars. It is assumed that the building is to be used by five people. The object contour is irregular and roofs are done by two flat roofs. The construction systém of walls is designed as aircrete block system. Object is composed from one housing unit with all accessories.
|
|
|
New-Built Detached House, Javorníček
Chvojka, Martin ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
The topic of this Bachelor´s thesis is new-built detached house in Javorníček, part of the village Libecina.The detached house is composed of three floors and is intended to be duplex house. Object is situated in steep terrain in which is partly embedded. The ground floor is designed by using concrete masonry units, first and second floors are designed by using ceramic masonry units. The roof is designed in a shed style, and is connected to the vertical construction. Heating of the object is provided by combination of warm air heating and hydronic underfloor heating system.
|
|
|
Family House Andovce
Tóth, Adrián ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this thesis is two-storey reinforced concrete basement house. The building plot is located in Andovce. The House is designed with the view of the location. The House will be used for living of a family of four members. The plan view of the House will be used for living of a family of four members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a concret system with thermal insulation sheathed on both sides of wood chip boards. The ceiling structure is made of concrete beams. The detached house is covered with three shed roofs. The project was prepared by a computer program called Autocad.
|
|
|
Detached house
Vozár, Miroslav ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The topic of this bachelor thesis is a new family house in Uherský Brod, part of city Újezdec u Luhačovic. The family house is designed as a detached house and i tis located on slightly sloped ground on the outskirts of the village. The building is two-storeyed, with cellar and its part is a covered parking space for two cars. From the first floor is allowed to enter the wooden terrace. On the second floor, the terrace is created by retreat of this floor. The building is made of the PORFIX structural system, the roof is flat. The project documentation is processed in the Autocad graphic program.
|
|
|
House with designer's office
Čaplová, Michaela ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
This thesis is focused on the design of a low-energy family house with a design office. The building is proposed in the cadastral area of Švábenice. Location on plot number 1294/37, whose total area is 1154 m2. The building has one floor with a residential attic and no basement. The house is designed for a family of four. Part of the building is a design office for one worker with a place for visits. The foundation of the building is on concrete strips. The vertical structures throughout the building are brick fittings made of ceramic blocks. The horizontal structure is a prefabricated ceramic ceiling. The building is covered with a sloping gable roof at a slope of 36°. The non-pedestrian flat roof is above part of the premises.
|
|
|
Detached Haus with the Photo Studio
Remeš, Dominik ; Pospíšil, Jaroslav (referee) ; Smolka, Radim (advisor)
The subject of the bachelor thesis is design documentation for detached house with workshop. The object is situated in the South- Moravian region, in the city of Šlapanice. Detached house is designed as 5+1 and planned as three-story building, with two above-ground floors and a basement. Workshop, which serve as a photo atelier is in the basement, with its own entrance from the east side of the plot. Besides of the photo atelier, there is toilet, cloak-room, bathroom and an office in the workshop. Photo atelier and family house are connected by staircase. Main entrance of the family house is on the north side of the house. There is entrance for pedestrians and drive way to the garage as well. Entrance for pedestrians is in a wind porch, which leads to the main hall with entrance to the garage. There is staircase nearby main entrance, which connects all floors. In the first floor there is common part of the house with living room, kitchen and study. In the second floor is a resting part made for sleep for all family members. Vertical load-bearing structures are made from clay-grinding bricks. Horizontal load-bearing structures are composed from clay inserts and there is a saddle roof, split to two parts.
|
|
|
Detached house in Humpolec
Vacková, Michaela ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
The aim of this Bachelor thesis is to design a detached house within a project document. A designed object is situated in a certain building site in a territory of Humpolec in Vysočina region. The detached house is conceived as a self-contained object, arranged for a fourmembered family. It is a 2-floor top view rectangle building on a slope with a partially embedded floor in a 1.S terrain. In a basement, there are technical and relaxing rooms with a sauna and a gym, in the first floor, there is a social and relaxing zone. The vertical constructions are made of formwork Best and ceramic breeze blocks Porotherm. The house is internally weatherproof and a facade ThermoWood is air-filtered. A horizontally supporting construction consists of a ceiling Porotherm. The roof of the detached house is made of two-layer roof construction in wooden tie beams.
|
|
|
Detached House
Stehlíková, Barbora ; Vlach, František (referee) ; Bečkovský, David (advisor)
The theme of the bachelor´s thesis is a project of a newly built detached house. The house is designed on quiet sloping plot in calm suburb of Frenštát pod Radhoštěm. The object has rectangular plan, it’s without cellar and it has two storeys. It’s a part of a bigger garden with one parking space on a side. The load-bearing structure is made of a timber frame. The external walls are made from straw bales. The external finish is made of lime render, the windows and doors are wooden, gable roof with dormer is covered by split shakes. Roof plane slope is 45°. At the object is one dwelling unit consisting of living room with kitchenette, workroom, three bedrooms, cloak-room and two bathrooms. The internal finish is made of earth plaster. Most of the timber construction stays visible including the timber floor. The roof will be insulated with sheep’s wool and furnished with lining. The design of the timber structure emphasises the use of natural materials.
|
guest ::
