National Repository of Grey Literature 612 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Agropellets for Combustion
Nejerál, Michal ; Lisá, Hana (referee) ; Lisý, Martin (advisor)
Agropellets are one of the alternative fuels which have been used very often nowadays. Therefore, this thesis deals with the use of agropellets as a fuel. It‘s focused on the generation of emissions during combustion. There are described properties of pollutants released during combustion and properties of agropellets. In a sample of selected fuels, the proportion of chemical composition of elements in the combustible and the calculation of their calorific value are experi-mentally determined. Furthermore, we found out the basic elemental composition of the flue gas, which was measured during combustion on the pilot unit.
Fuel Properties: Proximate Analysis of Solid Fuels
Kučera, Ondřej ; Elbl, Patrik (referee) ; Vavříková, Petra (advisor)
The bachelor thesis deals with the use of biomass as an alternative energy source and proximate analysis of solid fuels. In the theoretical part there is a research on energy utilization of biomass and a proximate analysis of solid fuels. Individual methods of determination of proximate analysis are described in detail, namely determination of water, ash and volatile combustible content and determination of gross calorific value. The practical part presents results of analysis of selected locally available plant biofuels. The methods of proximate fuel analysis have been successfully applied.
Boilers for solid fuel
Mozola, Ondrej ; Poláčik, Ján (referee) ; Baláš, Marek (advisor)
Main goal of this bachelor thesis is a research about a different kinds of low performance boilers used for heating in family houses. First part is dedicated to characteristics of solid fuels and advantages or disadvantages of their usage. The second part is focused on composition of solid fuels and their most important observed properties. The third part divides boilers using solid fuels into different categories. Last part consists of comparative calculation of financial costs needed on heating in selected family house with different boilers.
Forming of solid pollutants from biomass
Havlínová, Denisa ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor‘s thesis is divided into two main parts. The first part is research and deals mainly with biomass and pollutants. In this section, we will find a two-dimensional distribution of biomass, a comparison of fuel forms and a discussion of basic pollutants with a focus on solid pollutants. The second part is experimental. It starts with a fuel laboratory, where the water, ash and heat content of the biofuels examined is determined. The following is an investigation of the dependence of the PM formation on the properties of the biomass, which was measured by the measurement of these PM by the filters in the collecting device, while the examined biofuels were gradually burned on the fireplace insert.
Comparison of methods of determination of LHV and HHV
Jahn, Jiří ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This bachelor thesis is focused on the comparison of the accuracy of the determine of the higher heating value and lower heating value using the equations. The calculation is based on the contents of samples in the fuel, ie from the data obtained by ultimate analysis. Higher heating value and lower heating value of each fuel type was obtained by calorimeter measurement and considered to be the exact value of the fuel. The output of the work is the evaluation of suitability and accuracy of the examined equations and introduction equations appropriate for biomass.
Use of algae for production of biomass and bioproducts
Slonek, Jaroslav ; Máša, Vítězslav (referee) ; Brummer, Vladimír (advisor)
Submitted bachelor thesis is focused on description of use of algae for biomass and bioproducts production. The first part of the thesis is devoted to the taxonomic classification of algae and a basic summary of the characteristics of the different algal groups. The next part is aimed at bioproducts, which are obtained by algae cultivation and possibilities of further processing for energy purposes are also described. As for the cultivation, the emphasis is on modern methods in this area, i.e. on the possibility of using waste products in the culture process. In the next part, technological parameters of cultivation are discussed, for instance effects of technological parameters on growth and composition of biomass and production of desired products. The next chapter summarizes types of used culture bioreactors in which the growth of biomass occurs in a controlled environment. The information obtained and collected in the thesis is further discussed and summarized in the conclusion.
Digestate Grate Boiler
Krejčiřík, Jiří ; Milčák, Pavel (referee) ; Lisý, Martin (advisor)
This master thesis deals with the properties of digestate in combustion, design of construction solution of digestate boiler and experimental verification of boiler parameters. The first chapter deals with the properties of digestate as a fuel. It is followed by a chapter dealing with the existing measured results on a similar boiler. This is followed by a stoichiometric calculation of the digestate boiler. The next chapter is devoted to combustion chamber models. This chapter is followed by a chapter with experimental verification of chamber models and combustion process tuning. The last chapter contains design of construction and operational measures.
Optimization of Agro-Pellets Boiler
Kurečková, Andrea ; Jecha, David (referee) ; Lisý, Martin (advisor)
The diploma thesis deals with optimization of pellet boiler for agropellets combustion. On the Czech market are mostly available boilers for burning wood pellets. Specially adapted agropellet boilers are pretty expensive. The work is divided into two main parts. The first part contains a research of agropellets, agropellets production and combustions of agropellets. The second part is experimental and describes the combustion test. It describes the measurement procedure, the necessary calculations and evaluation.
Hot Water Grate Boiler
Svoboda, Marek ; Šilhavý, Karel (referee) ; Lisý, Martin (advisor)
This thesis deals with design of hot water grate boiler, where the output is water with parameters 130 °C and pressure 16 bar. In the content of the whole thesis is gradually introduced a stoichiometric calculations, which is based on the specified fuel – wood chips. This is followed by the design of the individual heating surfaces according to the thermal calculations given in the thesis. Finally, the calculation is extended by hydraulic and aerodynamic losses. Dimensional design, as a basic scheme, is shown at thesis. More detailed drawing documentation is attached to this thesis.

National Repository of Grey Literature : 612 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.